07-07-2012
I'm not sure that I fully understand what you are saying so this is not intended to be an answer to your question but might just tell you something that you don't already know.
I believe this box has a System Controller (that's an underlying Linux appliance that controls the hardware platform and boot process.
The serial console connection can talk to the console OR the System Controller. If you are connected to the system console and you want to talk to the System Controller then you enter #. (hash-dot), no return needed. You then get the SC> prompt. If you are connected to the System Controller and you want to talk to the console then you enter the command "console" at the SC> prompt and it connects you to the console.
There are two ways to power off the box (other than the shutdown command you posted).
1. Enter "init 5" at the session level. Run-level 5 means shutdown & power off. For this to work the some System Controller commands must be configured properly.
2. Enter "init 0" at the session level. This will take the system down to the "ok" prompt. At this prompt enter #. to switch to the SC. At the SC> prompt enter the command "poweroff". It will ask you to confirm that you really really mean it but if you confirm and just wait for about 60 seconds, you will get confirmation that power to the box is gone.
Hope that helps.
7 More Discussions You Might Find Interesting
1. Solaris
Hi,
I have a sun ultra enterprise 450 server. There is no power supply to the peripheral components.
Can anyone suggest what might be the problem with the server?
What do i have to check for?
I am new to the solaris and server world. Please suggest in detail. :)
Thanks,
Ashwini (5 Replies)
Discussion started by: tgashwini
5 Replies
2. UNIX for Dummies Questions & Answers
I've search the forum and came up with someone having the same issue where the power does not going to the main board. I turn the key and nothing, no lights or anything moving. I have another board put it in the same system and it works just fine. Please help, thank you in advance. (2 Replies)
Discussion started by: vhtran
2 Replies
3. Solaris
I need to add two new hard drives of 300 GB capacity to a SunSPARC T5440 server. The server currently has two hard drives of 146 GB each.
How do I add the new drives to the existing UFS?
What are the procedures involved in setting this server with the new hard drives? I am very new to Solaris... (6 Replies)
Discussion started by: ramatnmcc
6 Replies
4. Solaris
Hi all,
I have application running on sun server T5440 4x8x1.4 GHz, 64 GB RAM, application running very slow though load average too low. when I install my application on another server SUN M3000 (One CPU 1x8x2.5GHz, 8GB RAM), application run smoothly.
Here is my server T5440 info:
... (6 Replies)
Discussion started by: insatiable1610
6 Replies
5. Solaris
show /HOST command shows that
status = OpenBoot Running
when in this state, can the power be unplugged from the server ?
we are unable to bring the status to "powered off". Even if we issue "stop /SYS" it will momentarily be in the powered off status and then go back to power on... (1 Reply)
Discussion started by: paulk93
1 Replies
6. Solaris
Hi all,
I have written the following program and run on both T5440 and T5220 on same OS version. I found that T5540 server takes more time than T5220. Please find below the details.
test1.cpp
#include <iostream>
#include <pthread.h>
using namespace std;
#define NUM_OF_THREADS 20... (17 Replies)
Discussion started by: sanjay_singh85
17 Replies
7. UNIX for Beginners Questions & Answers
-> start /SYS
Are you sure you want to start /SYS (y/n)? y
Starting /SYS
]-> show HOST
/HOST
Targets:
bootmode
diag
domain
Properties:
autorestart = reset
autorunonerror = false
bootfailrecovery = poweroff
... (29 Replies)
Discussion started by: z_haseeb
29 Replies
LEARN ABOUT OPENSOLARIS
gnome-power-preferences
gnome-power-preferences(1) User Commands gnome-power-preferences(1)
NAME
gnome-power-preferences - gnome power preferences GUI
SYNOPSIS
gnome-power-preferences [--help] [--verbose]
DESCRIPTION
gnome-power-preferences is a GUI configuration program. It enables you to configure your preferred desktop power management policies, e.g.
blank screen when lid is closed, hibernate system when battery power is low, suspend system when power button is pressed, or let CPU fre-
quency dynamically adjust based on process load. Then, these policies are enforced by gnome-power-manager(1).
OPTIONS
This program follows the usual command line syntax, with long options starting with two dashes (`-'). A summary of options is included
below.
--help Show summary of options.
--verbose Show extra debugging.
EXAMPLES
Example 1: Launching gnome-power-preferences with the display of extra debugging messages.
example% gnome-power-preferences --verbose
EXIT STATUS
The following exit values are returned:
0 Application exited successfully
>0 Application exited with failure
FILES
The following files are used by this application:
/usr/bin/gnome-power-preferences
Executable for gnome power preferences GUI
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWgnome-power-manager |
+-----------------------------+-----------------------------+
|Interface stability |Volatile |
+-----------------------------+-----------------------------+
SEE ALSO
gnome-power-manager(1), gnome-power-statistics(1), attributes(5)
NOTES
This manual page was written by Oliver Grawert ogra@ubuntu.com for the Debian system.
Updated by Simon Zheng, Sun Microsystems Inc., 2008.
SunOS 5.11 18 Feb 2008 gnome-power-preferences(1)