I use maix command to sent mails.
i can sent only plain text mails.
Unable to sent mails in html format.
while sending mails in html format, the received mail has the html code only. (17 Replies)
Hi all,
I have a pendrive that is fat formatted...
It was being detected so far on solairs...but now during the re-installation of solaris ,i did not remove the drive and guess i screwed it up...
since then , i am unable to use it...guess its now not formatted or is corrupt...
but the irony... (3 Replies)
Hi All,
I want chage the date value YYMM to YYYYMM in my script.
I am trying, but not get it.
Eg: 1109 changed to 201109.
$(if ] then
echo "1"
else
echo "update_month<=$ARCHIVE_DT"
fi)
Through above i got "update_month<=1109" in else, but i must get it "update_month<=201109"
... (4 Replies)
Hello All,
I am new to System/plat-form administration work. Right now I am facing some issues while creating the filesystem and mounpoint. I am using Linux 6.0 SuSE 11. Last time I was used one command to partition the given space along with filesystem in SuSE 9 and it was done in GUI mode but... (0 Replies)
Dear all,
I am unable to get the desired result upon executing the below script. the problem is at `perl -le 'print scalar localtime $msecage'` ouput which gives the following result "Thu Jan 1 05:00:00 1970" instead of "Tue Nov 13 10:30:56 2012" but when I run the same command from shell... (2 Replies)
Hi,
I am new to shell scripting. I prepared a very simple script to monitor mount points but not geting desired output.
df -h|awk -F' ' '{ if ($5 >= 80) print "CRITICAL\n" $NF " mount point has reached " $5;}'|sed -n '3,$p'
When I run above script in Sun solaris box it is executing... (8 Replies)
Hello,
I need to create mountpoint in linux from rawdevices without using lv's.
Please help me with the steps to do this.
Best regards,
Vishal (2 Replies)
Hello All,
I am new to use linux. I installed SUSE Linux Enterprise Server 11 (x86_64) trail version which is free for 60 days.
Now I want to again format the whole system and install the same OS again but its not happening.
I am trying with a bootable pen drive which has an .iso image of... (1 Reply)
Discussion started by: hunk_harsha
1 Replies
LEARN ABOUT XFREE86
prtvtoc
prtvtoc(1M) System Administration Commands prtvtoc(1M)NAME
prtvtoc - report information about a disk geometry and partitioning
SYNOPSIS
prtvtoc [-fhs] [-t vfstab] [-m mnttab] device
DESCRIPTION
The prtvtoc command allows the contents of the label to be viewed. The command can be used only by the super-user.
The device name can be the file name of a raw device in the form of /dev/rdsk/c?t?d?s2 or can be the file name of a block device in the
form of /dev/dsk/c?t?d?s2.
OPTIONS
The following options are supported:
-f Report on the disk free space, including the starting block address of the free space, number of blocks, and unused parti-
tions.
-h Omit the headers from the normal output.
-m mnttab Use mnttab as the list of mounted filesystems, in place of /etc/mnttab.
-s Omit all headers but the column header from the normal output.
-t vfstab Use vfstab as the list of filesystem defaults, in place of /etc/vfstab.
EXAMPLES
Example 1: Using the prtvtoc Command
The following example uses the prtvtoc command on a 424-megabyte hard disk:
example# prtvtoc /dev/rdsk/c0t3d0s2
* /dev/rdsk/c0t3d0s2 partition map
*
* Dimension:
* 512 bytes/sector
* 80 sectors/track
* 9 tracks/cylinder
* 720 sectors/cylinder
* 2500 cylinders
* 1151 accessible cylinders
*
* Flags:
* 1: unmountable
* 10: read-only
* * First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 0 76320 76319 /
1 3 01 76320 132480 208799
2 5 00 0 828720 828719
5 6 00 208800 131760 340559 /opt
6 4 00 340560 447120 787679 /usr
7 8 00 787680 41040 828719 /export/home
example#
The data in the Tag column above indicates the type of partition, as follows:
Name Number
UNASSIGNED 0x00
BOOT 0x01
ROOT 0x02
SWAP 0x03
USR 0x04
BACKUP 0x05
STAND 0x06
VAR 0x07
HOME 0x08
ALTSCTR 0x09
CACHE 0x0a
RESERVED 0x0b
The data in the Flags column above indicates how the partition is to be mounted, as follows:
Name Number
MOUNTABLE, READ AND WRITE 0x00
NOT MOUNTABLE 0x01
MOUNTABLE, READ ONLY 0x10
Example 2: Using the prtvtoc Command with the -f Option
The following example uses the prtvtoc command with the -f option on a 424-megabyte hard disk:
example# prtvtoc -f /dev/rdsk/c0t3d0s2
FREE_START=0 FREE_SIZE=0 FREE_COUNT=0 FREE_PART=34
Example 3: Using the prtvtoc Command on a Disk Over One Terabyte
The following example uses uses the prtvtoc command on a disk over one terabyte:.
example# prtvtoc /dev/rdsk/c1t1d0s2
* /dev/rdsk/c1t1d0s2 partition map
*
* Dimensions:
* 512 bytes/sector
* 3187630080 sectors
* 3187630013 accessible sectors
*
* Flags:
* 1: unmountable
* 10: read-only
*
* First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 34 262144 262177
1 3 01 262178 262144 524321
6 4 00 524322 3187089340 3187613661
8 11 00 3187613662 16384 318763004
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO devinfo(1M), fmthard(1M), format(1M), mount(1M), attributes(5)WARNINGS
The mount command does not check the "not mountable" bit.
SunOS 5.10 25 Jul 2002 prtvtoc(1M)