i'm setting up a solaris 9 box to be my home network's DNS server. actually it's up and running, but it's set as a caching-only name server.
can i set it up to be the primary name server? what are the advantages if i can set it up to be a primary name server vs. a caching only name server? (3 Replies)
Hello all!
We have two fedora routers one at each site. What we are trying to do worked using freesco but not on fedora, i'm not very good at scripting and need a little guidence. Basicly what we are trying to do is if the primary line dies, the router will change it's routes to go through our... (0 Replies)
When users login, they are directed to menu (aix script). The menu enables the user to choose an environment to work in. Each environment has a different group id. When a user chooses a menu option, I want to change his primary group to that specific environment's group id. Is this at all possible... (3 Replies)
1.what is dump device in AIX?...
2. i m getting this error message
The largest dump device is too small.
when i check the paging space , it is used only 41%
any help welcome (4 Replies)
Hi,
I want to know wheather partition size for installation of vio client can be specified on vio server
example
If I am installing vio server on blade with 2*300gb hard disk,after that I want to create 2 vio client (AIX Operating system) wheather I can specify hard disk size while... (1 Reply)
E87EF1BE 0605150011 P O dumpcheck The largest dump device is too small.
bash-3.00$ errpt -aj E87EF1BE | more
---------------------------------------------------------------------------
LABEL: DMPCHK_TOOSMALL
IDENTIFIER: E87EF1BE
Date/Time: Sun Jun 5 15:00:01... (4 Replies)
Hi
In the vio server when I do # lsattr -El hdisk*, I get a PVID. The same PVID is also seen when I put the lspv command on the vio client partition. This way Im able to confirm the lun using the PVID.
Similarly how does the vio client partition gets the virtual ethernet scsi client adapter... (1 Reply)
Hi all
I have a query about dump device in aix, i asked this question on interview.
what is dump device, how to add dump device & its work.
kindly give this answer,
thanks in advance.
:confused: (1 Reply)
Hello Guys,
I need a little help here. I have been studying crash dump and per what I am reading, you can dedicate a slice to use as a dump device. Now when you dedicate this slice, do you have to :
1) create a mount point?
2) add entry in /etc/vfstab?
3) is this slice wu or wm?
4) should... (3 Replies)
I am trying to configure dump devices on my AIX server. Running 7100-03-04-1441. My dump device needs to be about 2GB in size. My PP Size is 1024MB, so I create the device with 2 PPs. When I run lslv on the dump device, it shows the 2 PPs, and a PP Size of 1024 megabytes. However, a dumpcheck... (4 Replies)
Discussion started by: paqman
4 Replies
LEARN ABOUT MINIX
s_n_d
SET_NET_DEFAULT(8) System Manager's Manual SET_NET_DEFAULT(8)NAME
s_n_d, set_net_default - select the default TCP/IP network
SYNOPSIS
set_net_default: not found
DESCRIPTION
This manual page is here because so many others refer to it. The set_net_default command does not exist under standard Minix, because the
TCP/IP server only supports one network. The server under Minix-vmd supports four different networks, that can each be chosen as the
default network.
The TCP/IP library and commands do have a notion about a "default network" however, because the code is shared between the Minix versions.
So if you want to venture into network programming then you should know about the devices and environment variables mentioned below to make
your program compatible. (Especially since there is a plan to upgrade the TCP/IP server for standard Minix.)
Options and environment to change the default
Many TCP/IP programs implement the following options and environment variables to change the default devices set by set_net_default. The
options are only implemented for low level programs where it makes sense to name a network device. The environment variables are used in
all code. You can run a process and all its children connected to a different network by setting four environment variables.
ETH_DEVICE=device
-E device
Device to use as raw ethernet device instead of the default /dev/eth.
PSIP_DEVICE=device
-P device
Pseudo IP device to use instead of /dev/psip.
IP_DEVICE=device
-I device
IP device to use instead of /dev/ip.
TCP_DEVICE=device
-T device
TCP device to use.
UDP_DEVICE=device
-U device
UDP device to use.
FILES
/dev/eth[01] First and second raw ethernet.
/dev/psip[01] First and second Pseudo IP network.
/dev/ip[0123] IP devices for two ethernets and two Pseudo IP networks.
/dev/tcp[0123] TCP devices for same four networks.
/dev/udp[0123] UDP devices.
/dev/eth, /dev/psip, /dev/ip, /dev/tcp, /dev/udp
Devices for the default network, links to the devices above. Eth is only present if ethernet is the default, psip only
for pseudo IP.
SEE ALSO ip(4), boot(8).
AUTHOR
Kees J. Bot (kjb@cs.vu.nl)
SET_NET_DEFAULT(8)