Could you please post the output of the following commands, taken at a period with high load (like, when your backup runs). Ideally the following commands/scriptlets are started and stopped at the same time so they refer to the same period of time. Let them run for ~5 minutes:
For iostat to be available you might have to install the "sysstat" rpm package.
Hello all,
I just stuck up in an uncertain situation related to network performance...
I am trying to access one of my remote client unix machine from a distant location..
The client machine is Ultra-5_10 , with SunOS 5.5.1
The ndd result ( hme1 )shows that the machine is hooked to a... (5 Replies)
We have a AIX v5.3 on a p5 system with a poor performing Ingres database.
We added one CPU to the system to see if this would help. Now there are two CPU's.
with sar and topas -P I see good results: CPU usage around 30%
with topas I only see good results in the process output screen, the... (1 Reply)
Hi,
on a linux server I have the following :
vmstat 2 10
procs memory swap io system cpu
r b w swpd free buff cache si so bi bo in cs us sy id
0 4 0 675236 39836 206060 1617660 3 3 3 6 8 7 1 1 ... (1 Reply)
In my C program i am using very large file(approx 400MB) to read parts of it frequently. But due to large file the performance of the program goes down very badly. It shows very high I/O usage and I/O wait time.
My question is, What are the ways to optimize or tune I/O on linux or how i can get... (10 Replies)
Hi Gurus,
I am beginner in solaris and want to know what are the things we need to check for performance monitoring on our solairs OS.
for DISK,CPU and MEMORY.
Also how we do ipforwarding in slaris
Many thanks for your help
Pradeep P (4 Replies)
Hi,
We have 2 lpars on p6 blade. One of the lpar is having 3 core cpu with 5gb memory running sybase as database. An EOD process takes 25 min. to complete.
Now we have an lpar on P7 server with entitled cpu capacity of 2 with 16 Gb memory and sybase as database. The EOD process which takes... (17 Replies)
Hi
We have an AIX5.3 server with application which is written in C. We are facing server (lpar) hangs intermediately. If we open new telnet window prompts for user and takes hell of a time to authenticate, not only that if we run ps -aef then also it takes lot of time. surprisingly there is no... (2 Replies)
Discussion started by: powerAIX
2 Replies
9. Post Here to Contact Site Administrators and Moderators
SCO OpenServer(TM) Release 5 (worf.xxx.com)
Worf is my proxy Server, and it runs my Lan with windows PCs, wk2s & XPs. There are only two users who POP the mailbox from the Server to client, elena and me nancy! elena can POP her email mailbox is just fine.
We use Eudora and for years we... (1 Reply)
First, please forgive me for my 2nd attempt to post in a Forum!
And btw, the Code Tags tutorial has the fonts and the sizes,
but when I am editing my post none of those fonts and sizes
are not there!
SCO OpenServer(TM) Release 5 (worf.xxx.com)
Worf is our proxy & POP Server, and it... (7 Replies)
Discussion started by: Nancy L
7 Replies
LEARN ABOUT BSD
iostat
IOSTAT(1) General Commands Manual IOSTAT(1)NAME
iostat - report I/O statistics
SYNOPSIS
iostat [ drives ] [ interval [ count ] ]
DESCRIPTION
Iostat iteratively reports the number of characters read and written to terminals per second, and, for each disk, the number of transfers
per second, kilobytes transferred per second, and the milliseconds per average seek. It also gives the percentage of time the system has
spent in user mode, in user mode running low priority (niced) processes, in system mode, and idling.
To compute this information, for each disk, seeks and data transfer completions and number of words transferred are counted; for terminals
collectively, the number of input and output characters are counted. Also, each sixtieth of a second, the state of each disk is examined
and a tally is made if the disk is active. From these numbers and given the transfer rates of the devices it is possible to determine
average seek times for each device.
The optional interval argument causes iostat to report once each interval seconds. The first report is for all time since a reboot and
each subsequent report is for the last interval only.
The optional count argument restricts the number of reports.
If more than 4 disk drives are configured in the system, iostat displays only the first 4 drives, with priority given to Massbus disk
drives (i.e. if both Unibus and Massbus drives are present and the total number of drives exceeds 4, then some number of Unibus drives will
not be displayed in favor of the Massbus drives). To force iostat to display specific drives, their names may be supplied on the command
line.
FILES
/dev/kmem
/vmunix
SEE ALSO vmstat(1)4th Berkeley Distribution April 29, 1985 IOSTAT(1)