setfacl(1)							   User Commands							setfacl(1)

NAME

       setfacl - modify the Access Control List (ACL) for a file or files

SYNOPSIS

       setfacl [-r] -s acl_entries file

       setfacl [-r] -md acl_entries file

       setfacl [-r] -f acl_file file

DESCRIPTION

       For  each  file specified, setfacl will either replace its entire ACL, including the default ACL on a directory, or it will add, modify, or
       delete one or more ACL entries, including default entries on directories.

       When the setfacl command is used, it may result	in  changes to	the  file  permission bits. When the user ACL entry for the file owner	is
       changed, the file owner	class  permission bits	will  be  modified. When the group ACL entry for the file group class is changed, the file
       group class permission bits will be modified. When the other ACL entry is changed, the file other class permission bits will be modified.

       If  you use the chmod(1) command to change the file group owner permissions on a file with ACL entries, both the file group  owner  permis-
       sions  and the ACL mask are changed to the new permissions. Be aware that the new ACL mask permissions may change the effective permissions
       for additional users and groups who have ACL entries on the file.

       A directory may contain default ACL entries. If a file or directory is created in a directory that contains default ACL entries, the  newly
       created	file  will  have  permissions generated according to the  intersection of the default ACL entries and the permissions requested at
       creation time. The umask(1) will not be applied if the directory contains default ACL entries. If a default ACL is specified for a specific
       user  (or users), the file will have a regular ACL created. Otherwise, only the mode bits will be initialized according to the intersection
       described above. The default ACL should be thought of as the maximum discretionary access permissions that may be granted.

   acl_entries Syntax
       For the -m and -s options, acl_entries are one or more comma-separated ACL entries.

       An ACL entry consists of the following fields separated by colons:

       entry_type      Type of ACL entry on which to set file permissions. For example, entry_type can be user (the owner of a file) or mask  (the
		       ACL mask).

       uid or gid      User name or user identification number. Or, group name or group identification number.

       perms	       Represents  the	permissions  that are set on entry_type. perms can be indicated by the symbolic characters rwx or a number
		       (the same permissions numbers used with the chmod command).

       The following table shows the valid ACL entries (default entries may only be specified for directories):

       ACL Entry		     Description
       u[ser]::perms		     File owner permissions.
       g[roup]::perms		     File group owner permissions.
       o[ther]:perms		     Permissions for  users  other  than
				     the  file	owner or members of file
				     group owner.

       m[ask]:perms		     The ACL mask. The mask entry  indi-
				     cates   the   maximum   permissions
				     allowed for users (other  than  the
				     owner)  and for groups. The mask is
				     a quick way to  change  permissions
				     on all the users and groups.
       u[ser]:uid:perms 	     Permissions  for  a  specific user.
				     For uid, you can specify  either  a
				     user name or a numeric UID.
       g[roup]:gid:perms	     Permissions  for  a specific group.
				     For gid, you can specify  either  a
				     group name or a numeric GID.
       d[efault]:u[ser]::perms	     Default file owner permissions.
       d[efault]:g[roup]::perms      Default  file  group  owner permis-
				     sions.
       d[efault]:o[ther]:perms	     Default permissions for users other
				     than  the	file owner or members of
				     the file group owner.
       d[efault]:m[ask]:perms	     Default ACL mask.
       d[efault]:u[ser]:uid:perms    Default permissions for a	specific
				     user.  For  uid,  you  can  specify
				     either a user  name  or  a  numeric
				     UID.
       d[efault]:g[roup]:gid:perms   Default  permissions for a specific
				     group. For  gid,  you  can  specify
				     either  a	group  name or a numeric
				     GID.

       For the -d option, acl_entries are one or more comma-separated ACL entries without permissions. Notice that the	entries  for  file  owner,
       file group owner, ACL mask, and others may not be deleted.

OPTIONS

       The options have the following meaning:

       -d acl_entries  Deletes	one  or  more  entries	from the file. The entries for the file owner, the file group owner, and others may not be
		       deleted from the ACL. Notice that deleting an entry does not necessarily have the same effect as removing  all  permissions
		       from the entry.

       -f acl_file     Seta a file's ACL with the ACL entries contained in the file named acl_file. The same constraints on specified entries hold
		       as with the -s option. The entries are not required to be in any specific order in the file. Also, if you  specify  a  dash
		       '-' for acl_file, standard input is used to set the file's ACL.

		       The character "#" in acl_file may be used to indicate a comment. All characters, starting with the "#" until the end of the
		       line, will be ignored. Notice that if the acl_file has been created as the output of the getfacl(1) command, any  effective
		       permissions, which will follow a "#", will be ignored.

       -m acl_entries  Adds  one  or  more  new ACL entries to the file, and/or modifies one or more existing ACL entries on the file. If an entry
		       already exists for a specified uid or gid, the specified permissions will replace the current permissions. If an entry does
		       not  exist  for	the  specified uid or gid, an entry will be created. When using the -m option to modify a default ACL, you
		       must specify a complete default ACL (user, group, other, mask, and any additional entries) the first time.

       -r	       Recalculates the permissions for the ACL mask entry. The permissions specified in  the  ACL  mask  entry  are  ignored  and
		       replaced  by the maximum permissions necessary to grant the access to all additional user, file group owner, and additional
		       group entries in the ACL. The permissions in the additional user, file group owner, and additional group entries  are  left
		       unchanged.

       -s acl_entries  Sets  a	file's	ACL. All old ACL entries are removed and replaced with the newly specified ACL. The entries need not be in
		       any specific order. They will be sorted by the command before being applied to the file.

		       Required entries:

			 o  Exactly one user entry specified for the file owner.

			 o  Exactly one group entry for the file group owner.

			 o  Exactly one other entry specified.

		       If there are additional user and group entries:

			 o  Exactly one mask entry specified for the ACL mask that indicates the maximum permissions allowed for users (other than
			    the owner) and groups.

			 o  Must not be duplicate user entries with the same uid.

			 o  Must not be duplicate group entries with the same gid.

		       If file is a directory, the following default ACL entries may be specified:

			 o  Exactly one default user entry for the file owner.

			 o  Exactly one default group entry for the file group owner.

			 o  Exactly one default mask entry for the ACL mask.

			 o  Exactly one default other entry.

		       There may be additional default user entries and additional default group entries specified, but there may not be duplicate
		       additional default user entries with the same uid, or duplicate default group entries with the same gid.

EXAMPLES

       Example 1: Adding read permission only

       The following example adds one ACL entry to file abc, which gives user shea read permission only.

       setfacl -m user:shea:r-- abc

       Example 2: Replacing a file's entire ACL

       The following example replaces the entire ACL for the file abc, which gives shea read access, the file owner all  access,  the  file  group
       owner read access only, the ACL mask read access only, and others no access.

       setfacl -s user:shea:rwx,user::rwx,group::rw-,mask:r--,other:--- abc

       Notice  that  after  this command, the file permission bits are rwxr-----. Even though the file group owner was set with read/write permis-
       sions, the ACL mask entry limits it to have only read permission. The mask entry also specifies the maximum permissions	available  to  all
       additional  user and group ACL entries. Once again, even though the user shea was set with all access, the mask limits it to have only read
       permission.  The ACL mask entry is a quick way to limit or open access to all the user and group entries in an ACL. For example, by  chang-
       ing the mask entry to read/write, both the file group owner and user shea would be given read/write access.

       Example 3: Setting the same ACL on two files

       The following example sets the same ACL on file abc as the file xyz.

       getfacl xyz | setfacl -f - abc

FILES

       /etc/passwd     password file

       /etc/group      group file

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       chmod(1), getfacl(1), umask(1), aclcheck(3SEC), aclsort(3SEC), group(4), passwd(4), attributes(5)

SunOS 5.10							    31 Oct 2002 							setfacl(1)