All,
I am attempting to help tune a Sun for better performance (mainly for SAS 9.1), and have found indicators pointing to poor I/O utilization. I have run iostat -cx, and found one device in particular where the %w is in the 90's during processing. I have a feeling that this is where the SAS... (3 Replies)
Hi All AIX expert
i'm using AIX 5.2
When i execute this command which is :
----------------------------------------------------------------------
>> iostat -a
System configuration: lcpu=4 disk=30
tty: tin tout avg-cpu: % user % sys % idle % iowait
... (2 Replies)
A find for the "iostat" command on a redhat 5 update 4 comes back with no results.
Any separate rpm needs to be installed to get the binary for this ?
Thanks in advance. (1 Reply)
Hello, I support Oracle 11g on AIX 7.1.
Using the command
$iostat -D hdisk2 hdisk4 hdisk5 5
I get the following output:
hdisk5 xfer: %tm_act bps tps bread bwrtn
44.0 1.4M 178.2 1.4M 14.7K
read: ... (3 Replies)
Hi Everyone,
I try to calculate the total hard disk space of a solaris machine using iostat -En command. Iterating the output and summing up all the number present near the Size: will give the exact size of the harddisk. But it is not working for a machine.
This command works in many flavors... (2 Replies)
Hi,
my os is SLES 10
from sort
iostat
as my output does not include rkB/s and wkB/s I probably have to adjust the key position, so
is the following iostat pipe to sort service request command correct?
oracle@vmc_stallite:~> iostat -x | sort -nrk11
sda 0.96 ... (4 Replies)
Hi,
I have a requirement where parsed output from various linux commands like top, netstat, iostat, etc. will be the input for one javascript with the parsed output from these commands converted to JSON format
For "iostat" command, since there are two outputs - one w.r.t CPU utilization and... (2 Replies)
Hi,
I got the code below is one of the threads from this forum.
lineCount=$(iostat | wc -l)
numDevices=$(expr $lineCount - 7);
iostat $interval -x -t |
awk -v awkCpuFile=$cpuFile -v awkDeviceFile=$deviceFile -v awkNumDevices=$numDevices '
BEGIN {
print... (2 Replies)
I am facing strange behaviour of iostat command and top command. where initially it is showing high utilization and after it is showing low utilization.
iostat command
avg-cpu: %user %nice %system %iowait %steal %idle
73.60 0.01 23.93 0.92 0.00 1.54
Device: rrqm/s wrqm/s r/s w/s... (3 Replies)
Discussion started by: manoj.solaris
3 Replies
LEARN ABOUT BSD
iostat
IOSTAT(1) General Commands Manual IOSTAT(1)NAME
iostat - report I/O statistics
SYNOPSIS
iostat [ drives ] [ interval [ count ] ]
DESCRIPTION
Iostat iteratively reports the number of characters read and written to terminals per second, and, for each disk, the number of transfers
per second, kilobytes transferred per second, and the milliseconds per average seek. It also gives the percentage of time the system has
spent in user mode, in user mode running low priority (niced) processes, in system mode, and idling.
To compute this information, for each disk, seeks and data transfer completions and number of words transferred are counted; for terminals
collectively, the number of input and output characters are counted. Also, each sixtieth of a second, the state of each disk is examined
and a tally is made if the disk is active. From these numbers and given the transfer rates of the devices it is possible to determine
average seek times for each device.
The optional interval argument causes iostat to report once each interval seconds. The first report is for all time since a reboot and
each subsequent report is for the last interval only.
The optional count argument restricts the number of reports.
If more than 4 disk drives are configured in the system, iostat displays only the first 4 drives, with priority given to Massbus disk
drives (i.e. if both Unibus and Massbus drives are present and the total number of drives exceeds 4, then some number of Unibus drives will
not be displayed in favor of the Massbus drives). To force iostat to display specific drives, their names may be supplied on the command
line.
FILES
/dev/kmem
/vmunix
SEE ALSO vmstat(1)4th Berkeley Distribution April 29, 1985 IOSTAT(1)