As you can some of these file systems have exceed the 90% mark, so we want to extend them. From my research I need to convert the
Code:
/dev/dsk/c4t60A98000646F6172636F6772554A706Dd0s0
into “/dev/dsk/md/d60” as an example, which is “solaris volume manager” nomenclature. Then I can use growfs -m to resize the partition. But I need first to convert those disks into solaris volume manager disks. Please can you give me the steps to do that?
FR
Hello,
I am trying to do mirror in solaris 9. I have total 0-7 disks
4 5 6 7
0 1 2 3
Drive 0 and Drive 4 = Boot Drives
Need to Mirror following drives.
Drive 1 and Drive 5 = Need to mirror
Drive 1 was mounted on: /prod1, /prod2, /prod3, /prod4, /prod5.
Then i... (3 Replies)
System: Alpha with Tru64 5.1b
Disk under LSM (Logical Storage Manager; essentially v2 of Veritas VxVM) control was generating disk errors. The disk was timing out a lot and generating a few disk errors. DBAs couldn't keep the oracle instance up on that node of the cluster. I contacted HP and got... (1 Reply)
Hello
I wonder if someone could help me in reading a raw (non-Solaris) disk on a Solaris system...
I have an IDE HDD in my Sun Blade and would like to read it (using C). It appears on the system and with the format command shows up as c0t1d0.
I use the dd command to read the disk as such:... (19 Replies)
Hi all,
I would like to know how to make new partitions....
I currently have allocated 60G for various slices (I have totally used 4 out of 7 available slices...
I am running only solaris on my box.
My plan is to have entire disk dedicated to solaris and run other OS from within... (19 Replies)
I am trying to build a veritas volume similar to an existing volume on another server. The output on source server is:
usbtor12# vxprint -hrtg appdg
v anvil_sqlVOL - ENABLED ACTIVE 629145600 SELECT - fsgen
pl anvil_sqlVOL-01 anvil_sqlVOL ENABLED ACTIVE 629145600... (3 Replies)
Hello there,
I'm going to describe a situation I've got here... feel free to ask away questions and I'll provide what I can if it'll help me get this answered!
When I do a vxdisk list, I see a disk that VxVM calls "disk4" that is listed as "failed was: c1t9d0s2". When I do a format, I can go... (3 Replies)
I have a machine (5.10 Generic_142900-03 sun4u sparc SUNW,Sun-Fire-V210) that we are upgrading the storage and my task is to mirror what is already on the machine to the new disk. I have the disk, it is labeled and ready but I am not sure of the next steps to mirror the existing diskgroup and... (1 Reply)
Need a procedure document to do "root disk mirroring in solaris volume manager for solaris 10". I hope some one will help me asap. I need to do it production environment.
Let me know if you need any deatils on this.
Thanks,
Rama (1 Reply)
First a little background: I'm working with an AIX 6.1 TL05 running two mirrored SAS disks (rootvg) and four SSDs (appvg)
All four SSDs belong to appvg and are setup to mirror as follows:
hdisk4 --> hdisk6 (containing application fs)
hdisk5 --> hdisk7 (containing database fs)
A few days... (1 Reply)
I have a solaris 10 system configured using NetApp as its storage, and the file systems are already configured as you can see from the example below:
root@moneta # df -h
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d0 9.8G 513M 9.3G 6% /
... (0 Replies)
Discussion started by: fretagi
0 Replies
LEARN ABOUT HPUX
cmdisklock
cmdisklock(1m)cmdisklock(1m)NAME
cmdisklock - manage Serviceguard cluster lock devices.
SYNOPSIS
cmdisklock check path
cmdisklock [-f] reset path
DESCRIPTION
cmdisklock is a tool to check the current state of a Serviceguard cluster lock device. It can also be used to reset the state of the clus-
ter lock device. The need to reset the cluster lock device state could arise if the cluster lock device is replaced or becomes corrupt.
A cluster lock device can be either an HP-UX LVM cluster lock or a cluster lock LUN device. HP-UX LVM cluster locks exist only on a disk
in an LVM volume group. Cluster lock LUNs exist only on disks dedicated to cluster lock. cmdisklock is useful for checking either type of
cluster lock and for re-initializing cluster lock LUN devices after a failure or corruption.
NOTE
To restore an HP-UX LVM cluster lock, use vgcfgrestore. cmdisklock will fail until vgcfgrestore is run, and cmdisklock is unnecessary as
long as vgcfgbackup was done after the cluster lock was initialized. See the Managing Serviceguard manual for details.
The syntax of the path option depends on the type of lock. For HP-UX LVM cluster lock disks, the syntax is VG:PV (for example:
/dev/vglock:/dev/dsk/c0t0d2). For cluster lock LUN disks, the path is the disk device path. For example, /dev/sdd1 (on Linux) or
/dev/dsk/c0t1d2 (on HP-UX).
Options
cmdisklock supports the following options:
check Check the current state of the cluster lock device and report the results.
reset Reset (initialize) the state of the cluster lock device. This operation should only be performed on a cluster lock
LUN device. For HP-UX LVM cluster lock, use vgcfgrestore as documented in the Managing Serviceguard manual. After
performing a reset, a check can be used to verify that the lock is cleared.
EXAMPLES
If the cluster lock LUN device becomes corrupted and the cluster is up, messages like the following will appear in syslog.
Mar 15 12:20:41 usb cmdisklockd[17599]: WARNING: Cluster lock LUN /dev/dsk/c0t1d2 is corrupt: bad label. Until this situation is cor-
rected, a single failure could cause all nodes in the cluster to crash.
Mar 15 12:20:41 usb cmdisklockd[17599]: After ensuring that all active nodes in the cluster have logged this message, run 'cmdisklock reset
/dev/dsk/c0t1d2' to repair
Mar 15 12:20:41 usb cmdisklockd[17599]: Cluster lock disk /dev/dsk/c0t1d2 is inaccessible
Once the above messages appear in syslog on all running nodes, the following command will re-initialize the cluster lock LUN:
ucd:/> cmdisklock reset /dev/dsk/c0t1d2
WARNING: Cluster lock LUN /dev/dsk/c0t1d2 is corrupt: bad label. Until this situation is corrected, a single failure could cause all nodes
in the cluster to crash.
After ensuring that all active nodes in the cluster have logged this message, run 'cmdisklock reset /dev/dsk/c0t1d2' to repair
/dev/dsk/c0t1d2 is inaccessible
Resetting cluster lock device /dev/dsk/c0t1d2
Cluster lock reset completed
/dev/dsk/c0t1d2 is accessible
cleared
After the lock is restored, a message like the following appears in syslog:
Mar 15 12:23:11 usb cmdisklockd[17599]: Cluster lock disk /dev/dsk/c0t1d2 is accessible
WARNINGS
CAUTION
For cluster lock LUN, reset is a potentially destructive operation. While cmdisklock checks for known volume manager and file system use
(overridden by -f), it does not validate that the device to be reset is actually used by any cluster. If -f is used on the wrong device
file, loss of data may result.
CAUTION
Care should be taken when doing a reset when the cluster is active as there is a remote possibility that the cluster will partition right
when this command is run and both nodes could end up thinking they have successfully acquired the lock. To avoid this situation, make sure
cmcld has logged a message in syslog on all running nodes saying the device is inaccessble, before performing a reset. Note that it is
safe to run cmdisklock when the cluster is down.
RETURN VALUE
cmdisklock returns the following values:
0 Successful completion.
1 The disk is inaccessible or is not recognized as a cluster lock.
AUTHOR
cmdisklock was developed by HP.
SEE ALSO cmapplyconf(1m), cmviewcl(1m), vgcfgbackup(1m), vgcfgrestore(1m)
Requires Optional Serviceguard Software cmdisklock(1m)