We need to see if you have used up all of your free inodes on the disk with problems
Try
Solaris tries to be everything to everyone, and it can get in the way. df -i is a BSD-ism as far as Solaris is concerned.
I have a SCO UNIX on my Server. When I last tried to shutdown my system, I got an error message
“no space left on device”.
Now when I try to boot the system again, I
just can't and I get the same error message. Please help! (2 Replies)
I am trying to create new files under my directory...but i getting the following message...
cat: write error: No space left on device
How do we handle this error.
I am not getting this error when I login as the super user (3 Replies)
hello all,
i have a proc binary that we run on unix environment, and it is generating this error
'' tstfile(): No space left on device ''
can you please assist on how to narrow down the problem?
thanks (4 Replies)
hi guys, me again ;)
i recently opened a thread about physical to zone migration.
My zone is mounted over a "bigger" LUN (500GB) and step is now to move the old files, from the physical server, to my zone.
We are talking about 22mio of files.
i used rsync to do that and every time at... (8 Replies)
Hi Forum,
We have observed one problem in one of our HP-UX machines which runs a software which connects the radio frequency scan devices and the scanned information is stored in the database through the same software.
This software has thrown an error like "Not enough space left on the... (4 Replies)
I am getting error in a shell script having a simple date command.
Error is " write to 1 failed ".
We saw that /tmp folder was 100% full. When we cleared some space in /tmp folder then script worked fine. Why does date command(or any other command) require space in /tmp folder? Which settings... (6 Replies)
Hi ,
In file first line start with "",when trying to remove using sed i am getting the below error .Please advise
sed -e 's///g' -e 's/$]//g' segment1.txt >>segment_m1
sed: couldn't write 1378 items to stdout: No space left on device
Thanks,
Mohan (1 Reply)
Hello all
posting here after scanning the net and tried most of the things offered
still no solution that worked
when I do :
$ df -h
Filesystem Size Used Avail Use% Mounted on
footmpfs 7.9G 60K 7.9G 1% /dev
tmpfs 7.9G 0 7.9G 0% /dev/shm
/dev/da1 ... (3 Replies)
Running a installation on Solaris 11 and getting error write to 1 failed
If anyone can advise ?
ORIGINAL_PATH="${PATH}"
# prepend /usr/xpg4/bin to PATH as needed
temporaryPath=`expr "${PATH}:" : '\(/usr/xpg4/bin:\)'`
if
then
PATH="/usr/xpg4/bin:${PATH}"
seem to have... (6 Replies)
user1@:/$
-ksh: line 3: write to 1 failed
user11@:/$
-ksh: line 3: write to 1 failed
user1@:/$
-ksh: line 3: write to 1 failed
user1@:/$
-ksh: line 3: write to 1 failed
user1@:/$
-ksh: line 3: write to 1 failed But theres plenty of space :-
user1@:/$ df -kh
Filesystem ... (9 Replies)
Discussion started by: psychocandy
9 Replies
LEARN ABOUT ULTRIX
installboot
installboot(1M)installboot(1M)NAME
installboot - install bootblocks in a disk partition
SYNOPSIS
installboot bootblk raw-disk-device
The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.
The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
found using the -i option of uname(1).
The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead.
bootblk The name of the bootblock code.
raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read-
able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.
Example 1: Installing UFS Boot Block
To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:
example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk
/dev/rdsk/c1t0d0s0
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
/platform/platform-name/ufsboot
second level program to boot from a disk or CD
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.
11 Apr 2005 installboot(1M)