Modifying serial printers device Post: 302613783

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

serial port device path

hi. Im trying to install a switch. And the manual says i should type a command including a SerialPortDevicePath. which is the filepath to serial port used for connection. However.. nothing about how to find this info. Could anyone help me where to find this path? thx mr.T

2. Programming

Accessing device with Prolific USB-serial controller.

I am trying to access DG-100 gps logger on Mac OS X with POSIX API. The device uses a Prolific usb-serial controller, and connect to the usb port on my mac. After I install the Prolific driver, it shows up as /dev/tty.usbserial and /dev/cu.usbserial. The vendor has published the data format. So...

3. Linux

Device serial number

Hey! I'm trying to figure out a sollution for a problem I have at my company with an Iomega MiniMax 500 GB USB disk. If i run cat /proc/bus/usb/devices I get this information: T: Bus=01 Lev=02 Prnt=04 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00...

4. Ubuntu

Ubuntu 9.04 Serial application to telnet to serial device

Hello! I am working on an application which reads environmental instruments which have serial ports. The application requires a serial port to be present to talk to the device (i.e. /dev/ttyS0 ). In some instances the environmental devices will be 100's of yards away from the computer, so a...

5. Programming

Problem with read data from serial device

I have problem with C programming. I want to send & receive data through serial communication. I send data(command) to device to get data from device but when receive data, it can't get altogether of data. It get only some data. What should I do to get altogether of data? If all of...

6. Solaris

"Device busy" When Reopening Serial Port

Any help much appreciated. I am a Java developer, not a Solaris adept. I'm having an issue reopening serial port with the Java app I am developing. I develop in Windows and deploy the app on Solaris 10 (Sunfire X4170 with Xeon.) On the target machine my app uses the two serial ports...

7. Red Hat

Unable To Activate Ethernet Network Device in RHEL 5.5 - e100 device eth0 does not seem to be presen

Hi All, Could anyone please help to resolve the below problem. I installed RHEL5.5 in my desktop.But when i try to activate the ethernet connection then it gives me the error. I spent 2 days for the above and go through with several suggestion found by googling. But no luck. ...

8. HP-UX

Failed to open tape device /dev/rmt/0mn:Device busy (errno = 16)

Hi, Unable to make tape backup, please help. /opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00 * Creating local directories for configuration files and archive. ======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery. (Mon...

9. Shell Programming and Scripting

Read line from serial device with BASH

I'm new to Linux (Ubuntu 16.04), and very new to BASH scripting. I have a Numato 8-channel USB GPIO device, which is a DAQ that appears in the system as a serial port. In Linux it appears as ttyACM0. I can easily manipulate a GPO with, for example: echo "gpio set 7" > /dev/ttyACM0 ...followed...

LEARN ABOUT SUSE

cupsctl

cupsctl(8)							    Apple Inc.								cupsctl(8)

NAME

       cupsctl - configure cupsd.conf options

SYNOPSIS

       cupsctl	[ -E ] [-U username ] [ -h server[:port] ] [ --[no-]debug-logging ] [ --[no-]remote-admin ] [ --[no-]remote-any ] [ --[no-]remote-
       printers ] [ --[no-]share-printers ] [ --[no-]user-cancel-any ] [ name=value ]

DESCRIPTION

       cupsctl updates or queries the cupsd.conf file for a server. When no changes are requested, the current configuration values are written to
       the standard output in the format "name=value", one per line.

OPTIONS

       The following options are recognized:

       -E
	    Enables encryption on the connection to the scheduler.

       -U username
	    Specifies an alternate username to use when authenticating with the scheduler.

       -h server[:port]
	    Specifies the server address.

       --[no-]debug-logging
	    Enables or disables debug logging in the error_log file.

       --[no-]remote-admin
	    Enables or disables remote administration.

       --[no-]remote-any
	    Enables or disables printing from any address, e.g. the Internet.

       --[no-]remote-printers
	    Enables or disables the display of remote printers shared via the CUPS, LDAP, or SLP protocols.

       --[no-]share-printers
	    Enables or disables sharing of local printers with other computers.

       --[no-]user-cancel-any
	    Allows or prevents users from canceling jobs owned by others.

EXAMPLES

       Display the current settings:
	   cupsctl

       Enable debug logging:
	   cupsctl --debug-logging

       Get the current debug logging state:
	   cupsctl | grep '^_debug_logging' | awk -F= '{print $2}'

       Disable printer sharing:
	   cupsctl --no-shared-printers

       Enable printing using the file: pseudo-device:
	   cupsctl FileDevice=Yes

SEE ALSO

       cupsd.conf(5), cupsd(8),
       http://localhost:631/help

COPYRIGHT

       Copyright 2007-2009 by Apple Inc.

5 July 2007							       CUPS								cupsctl(8)