Modifying serial printers device Post: 302613783

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

serial port device path

hi. Im trying to install a switch. And the manual says i should type a command including a SerialPortDevicePath. which is the filepath to serial port used for connection. However.. nothing about how to find this info. Could anyone help me where to find this path? thx mr.T

2. Programming

Accessing device with Prolific USB-serial controller.

I am trying to access DG-100 gps logger on Mac OS X with POSIX API. The device uses a Prolific usb-serial controller, and connect to the usb port on my mac. After I install the Prolific driver, it shows up as /dev/tty.usbserial and /dev/cu.usbserial. The vendor has published the data format. So...

3. Linux

Device serial number

Hey! I'm trying to figure out a sollution for a problem I have at my company with an Iomega MiniMax 500 GB USB disk. If i run cat /proc/bus/usb/devices I get this information: T: Bus=01 Lev=02 Prnt=04 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00...

4. Ubuntu

Ubuntu 9.04 Serial application to telnet to serial device

Hello! I am working on an application which reads environmental instruments which have serial ports. The application requires a serial port to be present to talk to the device (i.e. /dev/ttyS0 ). In some instances the environmental devices will be 100's of yards away from the computer, so a...

5. Programming

Problem with read data from serial device

I have problem with C programming. I want to send & receive data through serial communication. I send data(command) to device to get data from device but when receive data, it can't get altogether of data. It get only some data. What should I do to get altogether of data? If all of...

6. Solaris

"Device busy" When Reopening Serial Port

Any help much appreciated. I am a Java developer, not a Solaris adept. I'm having an issue reopening serial port with the Java app I am developing. I develop in Windows and deploy the app on Solaris 10 (Sunfire X4170 with Xeon.) On the target machine my app uses the two serial ports...

7. Red Hat

Unable To Activate Ethernet Network Device in RHEL 5.5 - e100 device eth0 does not seem to be presen

Hi All, Could anyone please help to resolve the below problem. I installed RHEL5.5 in my desktop.But when i try to activate the ethernet connection then it gives me the error. I spent 2 days for the above and go through with several suggestion found by googling. But no luck. ...

8. HP-UX

Failed to open tape device /dev/rmt/0mn:Device busy (errno = 16)

Hi, Unable to make tape backup, please help. /opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00 * Creating local directories for configuration files and archive. ======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery. (Mon...

9. Shell Programming and Scripting

Read line from serial device with BASH

I'm new to Linux (Ubuntu 16.04), and very new to BASH scripting. I have a Numato 8-channel USB GPIO device, which is a DAQ that appears in the system as a serial port. In Linux it appears as ttyACM0. I can easily manipulate a GPO with, for example: echo "gpio set 7" > /dev/ttyACM0 ...followed...

LEARN ABOUT SUSE

gtk2::arrow

Gtk2::Arrow(3)						User Contributed Perl Documentation					    Gtk2::Arrow(3)

NAME

       Gtk2::Arrow

HIERARCHY

	 Glib::Object
	 +----Glib::InitiallyUnowned
	      +----Gtk2::Object
		   +----Gtk2::Widget
			+----Gtk2::Misc
			     +----Gtk2::Arrow

INTERFACES

	 Glib::Object::_Unregistered::AtkImplementorIface
	 Gtk2::Buildable

METHODS

   widget = Gtk2::Arrow->new ($arrow_type, $shadow_type)
       o   $arrow_type (Gtk2::ArrowType)

       o   $shadow_type (Gtk2::ShadowType)

   $arrow->set ($arrow_type, $shadow_type)
       o   $arrow_type (Gtk2::ArrowType)

       o   $shadow_type (Gtk2::ShadowType)

PROPERTIES

       'arrow-type' (Gtk2::ArrowType : readable / writable / private)
	   The direction the arrow should point

       'shadow-type' (Gtk2::ShadowType : readable / writable / private)
	   Appearance of the shadow surrounding the arrow

ENUMS AND FLAGS

   enum Gtk2::ArrowType
       o   'up' / 'GTK_ARROW_UP'

       o   'down' / 'GTK_ARROW_DOWN'

       o   'left' / 'GTK_ARROW_LEFT'

       o   'right' / 'GTK_ARROW_RIGHT'

       o   'none' / 'GTK_ARROW_NONE'

   enum Gtk2::ShadowType
       o   'none' / 'GTK_SHADOW_NONE'

       o   'in' / 'GTK_SHADOW_IN'

       o   'out' / 'GTK_SHADOW_OUT'

       o   'etched-in' / 'GTK_SHADOW_ETCHED_IN'

       o   'etched-out' / 'GTK_SHADOW_ETCHED_OUT'

SEE ALSO

       Gtk2, Glib::Object, Glib::InitiallyUnowned, Gtk2::Object, Gtk2::Widget, Gtk2::Misc

COPYRIGHT

       Copyright (C) 2003-2008 by the gtk2-perl team.

       This software is licensed under the LGPL.  See Gtk2 for a full notice.

perl v5.12.1							    2010-07-05							    Gtk2::Arrow(3)