I have a small problem with a v445 which I have been informed will only boot with the reconfigure option enabled.
It is attached to HP SAN storage using qla2300 FCA's with a Veritas encapsulated rootvoldg (No Laughing here please) when I try a reboot I get the following error.
I've been told that the IBM vpath drivers were installed in anticipation of the server being moved onto the new SAN, but there was no reboot carried out.
I have manually mounted the root plexes and removed the vpath drivers from /kernel/drv/sparcv9 but the damn thing won't boot.
Hello.
System is a HP Visualize C3600 running X11 and after a power failure machine will not boot (see error messages below)
From what I've read, this may be caused by a corrupted etc/inittab file. Solution suggested on other websites is to boot in single user mode and edit file inittab... (2 Replies)
Hi all
I used a dual boot operating system and it works fine for me. Now , i install a Ati radeon 9250 Agp card on my system and this results in boot failure of fedora 6. The graphics card is working fine with windows XP , i.e i have no compatibility issues.The system also refuses to boot when i... (2 Replies)
I installed solaris virtually and tried to format the partitions .. I dont know what went wrong, It got rebooted and hangs in the screen "No partitions" and after pressing Enter button it goes to "INT18 boot failure" and hangs there once again . Could any one of you suggest why this has happened... (3 Replies)
I have installed Solaris 10 OS in Sun Virtual Box that uses x86 32 bit system. After an abnormal shutdown i'm getting the following message on the console when i try to boot.
SunOS Release 5.10 Version Generic_127128_11 32-bit
Copyright 1983-200 Sun Microsystems, Inc. All rights reserrved.
Use... (3 Replies)
hi
SCO Unix 5.0.6 doesn't boot due to this problem:
not a directory
boot not found
cannot open
stage 1 boot failure: error loading hd (40)/boot
Knows someone howto solve it? (16 Replies)
This is what is displayed on the screen as the system tries to boot and then hangs:
0>Test CPU(s)....Done
0>Interrupt Crosscall....|
SC Alert: DHCP negotiation failed, perhaps misconfigured or no DHCP server avail
able
Done
0>Init Memory....|
SC Alert: Host System has Reset
'Done
0>PLL... (2 Replies)
Hi,
i am running an old Opensolaris 5.11 snv_111b on an x86 server. After almost 4 years of successful service, last night out of the blue started to refuse all connections to it's services, ssh, http,etc. The only visible solution at that time was a restart. But now instead of booting the... (2 Replies)
When I login to the live console of my server and go to the console, I am getting the below message
Processor is booting from the first available device.
To discontinue, press any key within 10 seconds.
10 seconds expired.
Proceeding...
Trying Primary Boot Path... (11 Replies)
Discussion started by: chacko193
11 Replies
LEARN ABOUT OPENDARWIN
installgrub
installgrub(1M)installgrub(1M)NAME
installgrub - install GRUB in a disk partition or a floppy
SYNOPSIS
/sbin/installgrub [-fm] stage1 stage2 raw-device
The installgrub command is an -only program. GRUB stands for GRand Unified Bootloader.
installgrub installs GRUB stage 1 and stage 2 files on the boot area of a disk partition. If you specify the -m option, installgrub
installs the stage 1 file on the master boot sector of the disk.
The installgrub command accepts the following options:
-f
Suppresses interaction when overwriting the master boot sector.
-m
Installs GRUB stage1 on the master boot sector interactively.
The installgrub command accepts the following operands:
stage1
The name of the GRUB stage 1 file.
stage2
The name of the GRUB stage 2 file.
raw-device
The name of the device onto which GRUB code is to be installed. It must be a character device that is readable and writable. For disk
devices, specify the slice where the GRUB menu file is located. (For Solaris it is the root slice.) For a floppy disk, it is
/dev/rdiskette.
Example 1: Installing GRUB on a Hard Disk Slice
The following command installs GRUB on a system where the root slice is c0d0s0:
example# /sbin/installgrub /boot/grub/stage1
/boot/grub/stage2 /dev/rdsk/c0d0s0
Example 2: Installing GRUB on a Floppy
The following command installs GRUB on a formatted floppy:
example# mount -F pcfs /dev/diskette /mnt
# mkdir -p /mnt/boot/grub
# cp /boot/grub/* /mnt/boot/grub
# umount /mnt
# cd /boot/grub
# /sbin/installgrub stage1 stage2 /dev/rdiskette
/boot/grub
Directory where GRUB files reside.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
boot(1M), fdisk(1M), fmthard(1M), kernel(1M), attributes(5)
Installing GRUB on the master boot sector (-m option) overrides any boot manager currently installed on the machine. The system will always
boot the GRUB in the Solaris partition regardless of which fdisk partition is active.
24 May 2005 installgrub(1M)