Hello,
I am trying to work on a temperature script to check temperatures on my systems. Im trying to get the basics laid out first. So far i have a command:
Code:
/usr/sbin/prtpicl -v -c temperature-sensor # (must run as root)
This command kicks back alot of information but i only want the Sensor Name and Temperature from it. So i tried the command:
Code:
/usr/sbin/prtpicl -v -c temperature-sensor | grep Temperature
This kicks back all the temps from the sensors but no sensor names. Is there a way to grep the sensor name and also the temperature that it associates with or just grab the Front_panel sensor and temperature.
Thanks in advance.
Moderator's Comments:
Use code tags for code, please.
Last edited by Corona688; 03-23-2012 at 02:53 PM..
Please Help! :o
I have a main script (ksh) where another script is called (convert_picture). Normally this works ok, but since some changes has been made on the unix-server (I dont know what :( ) suddenly it doesnt work anymore: i get an error message: ksh: convert_picture not found. I am... (3 Replies)
Hi all
I have a SUN V480 server with 4 processores and I've noticed that the temperature for 2 of the 4 processers are quite high (63 degrees Celsius).
Does anyone know what the operating temperatures of the Sparc CPU's are? I'm not getting any warning messages yet, but I want to resolve the... (3 Replies)
Hi, i want to start my script only by the name of it.
$ scriptName
normaly i have to use ./scriptName oder sh scriptName
is there a way to do that in bash or sh ? (13 Replies)
I'm trying to iterate a UNIX awk script that returns min/max temperature data for each day from a monthly weather data file (01_weath.dat). The temperature data is held in $5. The temps are reported each minute so each day contains 1440 temperature enteries. The below code has gotten me as far as... (5 Replies)
People hello to everybody exist a way to do a script for view the temperature. I have
Red Hat Linux release 9 (Shrike)
Kernel 2.4.20-8 on an i686
THANk YOU FOR YOUR TIME. (4 Replies)
Dears,
need help on developing a script to monitor sun server temperature , I'm using the below command to check the servers one by one
/usr/platform/`uname -i`/sbin/prtdiag -v
Servers Models are :
2 x Sun SPARC Enterprise M9000 Server
4 x Sun Fire V490
2 x Sun Blade T6300 Server... (1 Reply)
Hi guys, i already search in this forum and i can't find a way to do this. I have a file like this:
-1 1 lig
-1 1 lig
-1 1 lig
-1 -1 dec
-1 -1 dec
-1 -1 dec
-1 -1 dec
-1 -1 dec
-1 -1 dec
And i need to compare the values of... (7 Replies)
Presently I have a powershell script (windows only, of course) that enumerates all the instances of "Internet Explorer" running on my machine and if at least one exists, the script creates a new tab in that instance with the URL I have provided. If no instances of Internet Explorer are running, one... (1 Reply)
e.g.
File name: File.txt
cat File.txt
Result:
#INBOUND_QUEUE=FAQ1
INBOUND_QUEUE=FAQ2
I want to get the value for one which is not commented out.
Thanks, (3 Replies)
Discussion started by: Tanu
3 Replies
LEARN ABOUT DEBIAN
amdtemp
AMDTEMP(4) BSD Kernel Interfaces Manual AMDTEMP(4)NAME
amdtemp -- device driver for AMD K8, K10 and K11 on-die digital thermal sensor
SYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file:
device amdtemp
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
amdtemp_load="YES"
DESCRIPTION
The amdtemp driver provides support for the on-die digital thermal sensor present in AMD K8, K10 and K11 processors.
For the K8 family, the amdtemp driver reports each cores' temperature through a sysctl node in the corresponding CPU devices's sysctl tree,
named dev.amdtemp.%d.sensor{0,1}.core{0,1}. The driver also creates dev.cpu.%d.temperature displaying the maximum temperature of the two
sensors located in each CPU core.
For the K10 and K11 families, the driver creates dev.cpu.%d.temperature with the temperature of each core.
BUGS
AMD K9 is not supported because temperature reporting has been replaced by Maltese.
SEE ALSO sysctl(8)HISTORY
The amdtemp driver first appeared in FreeBSD 7.1.
AUTHORS
Rui Paulo <rpaulo@FreeBSD.org>
Norikatsu Shigemura <nork@FreeBSD.org>
BSD April 8, 2008 BSD
03-23-2012
