Hello,
I am trying to work on a temperature script to check temperatures on my systems. Im trying to get the basics laid out first. So far i have a command:
Code:
/usr/sbin/prtpicl -v -c temperature-sensor # (must run as root)
This command kicks back alot of information but i only want the Sensor Name and Temperature from it. So i tried the command:
Code:
/usr/sbin/prtpicl -v -c temperature-sensor | grep Temperature
This kicks back all the temps from the sensors but no sensor names. Is there a way to grep the sensor name and also the temperature that it associates with or just grab the Front_panel sensor and temperature.
Thanks in advance.
Moderator's Comments:
Use code tags for code, please.
Last edited by Corona688; 03-23-2012 at 02:53 PM..
Please Help! :o
I have a main script (ksh) where another script is called (convert_picture). Normally this works ok, but since some changes has been made on the unix-server (I dont know what :( ) suddenly it doesnt work anymore: i get an error message: ksh: convert_picture not found. I am... (3 Replies)
Hi all
I have a SUN V480 server with 4 processores and I've noticed that the temperature for 2 of the 4 processers are quite high (63 degrees Celsius).
Does anyone know what the operating temperatures of the Sparc CPU's are? I'm not getting any warning messages yet, but I want to resolve the... (3 Replies)
Hi, i want to start my script only by the name of it.
$ scriptName
normaly i have to use ./scriptName oder sh scriptName
is there a way to do that in bash or sh ? (13 Replies)
I'm trying to iterate a UNIX awk script that returns min/max temperature data for each day from a monthly weather data file (01_weath.dat). The temperature data is held in $5. The temps are reported each minute so each day contains 1440 temperature enteries. The below code has gotten me as far as... (5 Replies)
People hello to everybody exist a way to do a script for view the temperature. I have
Red Hat Linux release 9 (Shrike)
Kernel 2.4.20-8 on an i686
THANk YOU FOR YOUR TIME. (4 Replies)
Dears,
need help on developing a script to monitor sun server temperature , I'm using the below command to check the servers one by one
/usr/platform/`uname -i`/sbin/prtdiag -v
Servers Models are :
2 x Sun SPARC Enterprise M9000 Server
4 x Sun Fire V490
2 x Sun Blade T6300 Server... (1 Reply)
Hi guys, i already search in this forum and i can't find a way to do this. I have a file like this:
-1 1 lig
-1 1 lig
-1 1 lig
-1 -1 dec
-1 -1 dec
-1 -1 dec
-1 -1 dec
-1 -1 dec
-1 -1 dec
And i need to compare the values of... (7 Replies)
Presently I have a powershell script (windows only, of course) that enumerates all the instances of "Internet Explorer" running on my machine and if at least one exists, the script creates a new tab in that instance with the URL I have provided. If no instances of Internet Explorer are running, one... (1 Reply)
e.g.
File name: File.txt
cat File.txt
Result:
#INBOUND_QUEUE=FAQ1
INBOUND_QUEUE=FAQ2
I want to get the value for one which is not commented out.
Thanks, (3 Replies)
Discussion started by: Tanu
3 Replies
LEARN ABOUT FREEBSD
aibs
AIBS(4) BSD Kernel Interfaces Manual AIBS(4)NAME
aibs -- ASUSTeK AI Booster ACPI ATK0110 voltage, temperature and fan sensor
SYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file:
device aibs
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
aibs_load="YES"
DESCRIPTION
The aibs driver provides support for the voltage, temperature and fan sensors available through the ATK0110 ASOC ACPI device on ASUSTeK moth-
erboards. The number of sensors of each type, as well as the description of each sensor, varies according to the motherboard.
The driver supports an arbitrary set of sensors, provides descriptions regarding what each sensor is used for, and reports the current values
as well as the supposed range specifications of each sensor's input as defined by the motherboard manufacturer through ACPI.
The range specifications are as follows:
o Voltage sensors have a lower and an upper range specification.
o Temperature sensors have two upper specifications.
o Fan sensors may either have only the lower specification, or, depending on the DSDT, one lower and one upper specification.
Sensor readings and the range specifications are made available through the sysctl(3) interface, and can be monitored with sysctl(8). For
example, on an ASUS V3-P5G965 barebone:
> sysctl dev.aibs.0.{volt,temp,fan}
dev.aibs.0.volt.0: 1192 850 1600
dev.aibs.0.volt.1: 3312 2970 3630
dev.aibs.0.volt.2: 5017 4500 5500
dev.aibs.0.volt.3: 12302 10200 13800
dev.aibs.0.temp.0: 28.0C 80.0C 95.0C
dev.aibs.0.temp.1: 55.0C 60.0C 95.0C
dev.aibs.0.fan.0: 878 600 7200
dev.aibs.0.fan.1: 0 700 7200
> sysctl -d dev.aibs.0.{volt,temp,fan}
dev.aibs.0.volt:
dev.aibs.0.volt.0: Vcore Voltage
dev.aibs.0.volt.1: +3.3 Voltage
dev.aibs.0.volt.2: +5 Voltage
dev.aibs.0.volt.3: +12 Voltage
dev.aibs.0.temp:
dev.aibs.0.temp.0: CPU Temperature
dev.aibs.0.temp.1: MB Temperature
dev.aibs.0.fan:
dev.aibs.0.fan.0: CPU FAN Speed
dev.aibs.0.fan.1: CHASSIS FAN Speed
Generally, sensors provided by the aibs driver may also be supported by certain other drivers or utilities that access the ISA / LPC or I2C /
SMBus devices directly. The precise collection of aibs sensors is comprised of the sensors specifically utilised in the motherboard design,
which may be supported through a combination of one or more physical hardware monitoring chips.
The aibs driver, however, provides the following advantages when compared to the native hardware monitoring drivers or other utilities:
o Sensor values from aibs are expected to be more reliable. For example, voltage sensors in many hardware monitoring chips can only sense
voltage from 0 to 2 or 4 volts, and the excessive voltage is removed by the resistors, which may vary with the motherboard and with the
voltage that is being sensed. In aibs, the required resistor factors are provided by the motherboard manufacturer through ACPI; in the
native drivers, the resistor factors are encoded into the driver based on the chip manufacturer's recommendations. In essence, sensor
values from aibs are very likely to be identical to the readings from the Hardware Monitor screen in the BIOS.
o Sensor descriptions from aibs are more likely to match the markings on the motherboard.
o Sensor range specifications are supported by aibs. The range specification is reported for each individual sensor as suggested by the
motherboard manufacturer. For example, the threshold for the CPU temperature sensor is likely to be significantly higher than that for
the chassis temperature sensor.
o Support for newer chips in aibs. Newer chips may miss a native driver, but should be supported through aibs regardless.
SEE ALSO sysctl(3), acpi(4), sysctl(8)HISTORY
The aibs driver first appeared in OpenBSD 4.7, DragonFly 2.5, NetBSD 6.0 and FreeBSD 9.0.
An earlier version of the driver, acpi_aiboost, first appeared in FreeBSD 7.0 and NetBSD 5.0.
AUTHORS
The aibs driver was written for OpenBSD, DragonFly, NetBSD and FreeBSD by Constantine A. Murenin <cnst@FreeBSD.org>, Raouf Boutaba Research
Group, David R. Cheriton School of Computer Science, University of Waterloo.
An earlier version of the driver, named acpi_aiboost, was written for FreeBSD by Takanori Watanabe.
BSD April 4, 2010 BSD
03-23-2012
