Please post the output from:
And explain in detail how you got into this situation. If this is another attempt at cloning without using a HP-UX Ignite backup or a cold build, please give the history with every command typed.
No idea why you persist in trying to make a valid system from trying to repair broken mirrors. It is not possible.
Last edited by methyl; 03-22-2012 at 06:37 PM..
Reason: spelin
I have a bogus disk that keeps showing up as failed from vxdisk list
- - disk hpdg failed was:c2t0d11s2
There isnt any c2 devices on the system:
# ls /dev/dsk/c2*
/dev/dsk/c2*: No such file or directory
# ls /dev/rdsk/c2*
/dev/rdsk/c2*: No such file or... (3 Replies)
Hello,
I've got 2 system disks (hdisk0 and hdisk1) in the mirror (RAID1) on AIX 5.3. Since the hdisk1 makes some troubles, we want to replace it with the new one. How can I disable this hdisk1 disk and prepare the mirror to use the new physical disk? As far as I know, I must remove disk from the... (3 Replies)
Hello once again seeking your help,
I have a mirrored disk and need to unmirror it to mount it as a new file system (/export) but could not find the correct steps to do it with out affecting the original disk.
can anybody point me out on how to get this done.
Thanks!! (3 Replies)
Hi Experts,
I have configured A D40 Array. There is an faulty disk which is not part of an raid volume but shows fault in the diagnostics.
pdisk15 U0.1-P1-I1/Q1-W40AA83CC2400D
SSA160 Physical Disk Drive ( MB)
Is there a way to stop this... (2 Replies)
Hi,
Recently i came across a disk that seems to be faulty and need help. I have gathered some information by running below commands and any help on how to solve this will be great.
# uname –a
SunOS XYZ 5.7 Generic_106541-16 sun4u sparc SUNW,Ultra-4
#df -k
Filesystem kbytes used... (3 Replies)
Requirement to remove a faulty mirrored disk from hp-ux LVM
<root@pdwp1s>/etc # vgdisplay -v /dev/vg00
vgdisplay: Warning: couldn't query physical volume "/dev/dsk/c2t0d0":
The specified path does not correspond to physical volume attached to
this volume group
vgdisplay: Warning: couldn't... (9 Replies)
Hello,
I'm new to this forum and as you will see from my question I'm new to UNIX as well.
One of our costumers has HP rx4640 running on UNIX with two 300GB hot-swappable disks that are mirrored. They reported to us that one of the disks is faulty and they want us to take care of it. Below is... (16 Replies)
Hi
I have one of the disk missing in my NIMVG. My doubt is can I remove this hdisk2 online ? few of the file systems seems to be spread over 7 PV's. that's why i'm worried. Can someone suggest if I can replace this disk online. Also how to check if there is some data present in hdisk2 alone... (2 Replies)
Hi Guys,
One of two disks in my solaris machine has failed, the name is disk0, this is SUN physical sparc machine
But I work remotely, so people working near that physical server are not that technical, so from OS command prompt can run some command to bink faulty disk at front panel of Server.... (9 Replies)
I plugged both power cables in both power supply. When I unplugged each power cable one by one, the SPARC T4-1 machine keep running. However, show faulty command shows below message. (I have also attached the picture of both power supply)
-> show faulty
Target ... (1 Reply)
Discussion started by: z_haseeb
1 Replies
LEARN ABOUT DEBIAN
queue-repair
queue-repair(8) System Manager's Manual queue-repair(8)NAME
queue-repair - deal with the qmail queue directory structure
SYNOPSIS
queue-repair [ -htrcbn ] [ -n split ] [ conf-qmail ]
DESCRIPTION
queue-repair deals with the qmail queue structure; it can create a new queue, move and properly rename a queue, dynamically change the
conf-split value, convert big-todo queues to non-big-todo and vice versa, and repair a corrupted queue.
conf-qmail defaults to /var/lib/qmail/ on Debian.
OPTIONS
-h|--help
Display usage information and built-in defaults, then exit.
-t|--test
Run in test-only mode. queue-repair will attempt to report all problems that it finds, without correcting them. This is the
default.
-r|--repair
Run in repair mode. queue-repair will attempt to correct all problems that it finds, except if the basic queue directories (queue,
queue/mess, queue/info, etc) are not found.
-c|--create
Run in create-and-repair mode. queue-repair will attempt to correct all problems that it finds, including creation of a new queue
structure from scratch.
-s|--split split
Specify split as the value of conf-split. This is the number of split subdirectories for those queue directories which are hashed.
The default for qmail is 23. Appropriate values depend on the volume of mail handled, OS filesystem efficiency, and other factors,
but this should always be a prime number.
If you do not specify conf-split, queue-repair will attempt to determine the current value from the existing queue. This option can
be used, however, to change the conf-split value of an existing queue (qmail will still have to be recompiled with the new value).
When creating a new queue, this option must always be specified.
-b|--bigtoto
Use big-todo. queue-repair should be able to automatically determine if you're using qmail patched with the big-todo patch. This
option can be used, however, to convert a non-big-todo queue to a big-todo queue (qmail will still have to be recompiled with the
big-todo patch).
If neither this option nor --no-bigtodo is used, queue-repair will attempt to determine this automatically. When creating a new
queue, either this option or --no-bigtodo must always be specified.
-n|--no-bigtodo
Do not use big-todo. queue-repair should be able to automatically determine if you're using qmail patched with the big-todo patch.
This option can be used, however, to convert a big-todo queue to a non big-todo queue (qmail will still have to be recompiled with-
out the big-todo patch).
If neither this option nor --bigtodo is used, queue-repair will attempt to determine this automatically. When creating a new queue,
either this option or --bigtodo must always be specified.
--i-want-a-broken-conf-split
Force the use of a non-prime value for conf-split.
SEE ALSO qmail(7)queue-repair(8)