I have successfully installed RedHat 8.0 onto a Dell PowerEdge SC1425 today. This server has two SATA hard drives, and an IDE DVD-ROM drive.
Using the following kernel parameters, i successfully installed across both hard drives from CD:
ide0=0x1f0,0x3f6,14 vga=791 resolution=1024x768 expert... (5 Replies)
when I do a tape status /dev/rStp0 I get the following on a new tape and I have tried several:
Status : ready beginning-of-tape
soft errors : 0
hard errors: 2
underruns: 5
My BackupEdge has stopped backing up my system because it asks for a new volume yet my total system data is under 20... (5 Replies)
my shell script is simple arithmetic process.my addtion,substract and divide all can be worked only except multiplication.please help me.the shell is following:
#!/usr/bin/sh
echo "enter a number1:"
read number1
echo "enter an operator:"
read operator
echo "enter a number2:"
read number2... (4 Replies)
Hi,
On my X4200 Galaxy cluster, when i plugged out the both cables of Controller A (connected to Node 1 and Node2) , status of registered array became "Degraded".
After plugging -in the cables , i should get the status of array as "OK" but i am not getting the status OK.
I am using CAM... (2 Replies)
Hi Guru,
Where is the level to run clearfault command from M3000?
I only go XSCF and OS level and don't know how to get into this service level...
Need to clearfault for MBU_A as show the error like
* MBU_A Status:Degraded; Ver:0101h; Serial:PP095200RA ;
when I run showhardconf... (2 Replies)
Hi guys, I need to do a bit of work to a file.
Basically I want to run a SQL statement against each record in this file (hundreds of lines):
sample input:
233333
233334
233335
233336
I want to do the following:
1. Add a some text at the beginning to prepare the SQL (3 lines)
2. Add... (7 Replies)
Hi,
I've gone around with this on Oracle's site (and tech support) and ended up empty handed and without ideas of what to do to fix the problem.
Background:
V245, Solaris 10, has 2 12-disk infortrend RAIDs attached.
Have replaced faulty disks many times - familiar with the routine. However,... (5 Replies)
Hello there,
I am trying to get my head around the section below of a script we use that incorporates AWK and Regular Expressions.
{ match($0,"The broker*");print $1,$2,$3 ":", substr($0, RSTART,RLENGTH)}
I have a basic understanding of how match works, what I am struggling with is the... (2 Replies)
hello,
We are using Solaris 11.3 on SPARC T5-2. The below is the actual output from "zpool status" command. The disks were scrubed last week, but it says the scrub repaired on Dec 31, 1969.
Does anyone know how to correct this to report the correct date?
Thanks
pool: rpool
state:... (5 Replies)
Hi,
I am trying to extract line number (first number), as well as everything from TSVal onwards.
4 1.474005 172.18.124.142 -> 74.125.228.46 TCP 2450940617 74 44021 > https Seq=0 Win=5840 Len=0 MSS=1380 SACK_PERM=1 TSval=2450940617 TSecr=0 WS=64
6 1.488149 172.18.124.142 ->... (1 Reply)
Discussion started by: sand1234
1 Replies
LEARN ABOUT NETBSD
iopctl
IOPCTL(8) BSD System Manager's Manual IOPCTL(8)NAME
iopctl -- a program to control IOP devices
SYNOPSIS
iopctl [-f ctldev] command [tid]
DESCRIPTION
The iopctl command can be used to interrogate and control I2O devices.
The following options are available:
-f ctldev Specify the control device to use. The default is /dev/iop0.
The following commands are available:
reconfig
Reconfigure the IOP: ask all bus ports to rescan their busses, and attach or detach devices to and from the system as necessary.
showddmid tid
Retrieve and display the DDM (device driver module) identity parameter group from the specified target.
showdevid tid
Retrieve and display the device identity parameter group from the specified target.
showlct
Display the driver's private copy of the logical configuration table. This copy of the LCT matches the current device configuration,
but is not necessarily the latest available version of the LCT.
showstatus
Display the current status of the IOP.
showtidmap
Display the device to TID map.
FILES
/dev/iopu control device for IOP unit u
SEE ALSO ioctl(2), iop(4), iopsp(4), ld(4)
The sysutils/i2ocfg package.
HISTORY
The iopctl command first appeared in NetBSD 1.5.3.
BSD October 1, 2000 BSD