My DSL went down this morning and I needed internet to work. I searched for a config all over but couldn't find exactly what I wanted. After a bit I got mine working fine so I thought I'd post this to help anyone else out there.
I am using a Huawei E1750 on T-Mobile UK running FreeBSD 8.2 amd64. I'm guessing i386 would work the same.
Things to change for others may be device, authname, authkey and the APN which in my case is general.t-mobile.uk
The post which helped me the most was from Greg Lehey that I can't put up since I have not made 5 posts yet
First thing to do of course is: 'kldload u3g' and then plug in the modem.
Code:
default:
set log local Phase Chat LCP IPCP CCP tun hdlc command
ident user-ppp VERSION
tmo:
set speed 921600
set device /dev/cuaU3.0
set timeout 0
set authname "t-mobile"
set authkey "tm"
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
\"\" \
AT OK-AT-OK \
AT+CFUN=1 OK-AT-OK \
AT+CMEE=2 OK-AT-OK \
AT+CGDCONT=1,\\\"IP\\\",\\\"general.t-mobile.uk\\\" OK \
AT+CGACT? OK-AT-OK \
AT+CGATT? OK \
AT+CGCLASS? OK \
AT+COPS? OK \
\\dATD*99# TIMEOUT 40 CONNECT"
set crtscts on
disable vjcomp
disable acfcomp
disable deflate
disable deflate24
disable pred1
disable protocomp
disable mppe
disable ipv6cp
disable lqr
disable echo
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.255 0.0.0.0
Last edited by Corona688; 03-16-2012 at 02:53 PM..
Reason: code tags for code, please.
Hi!
I'm using RedHat 7.1 and I have some prolems with connecting with ppp. I have run modemtool and told that I'm using ttyS0. Whe I then try to set up a PPP connection using netcfg the PPP option is not there. I have all the other alternativs except PPP. What have I missed? (6 Replies)
I have two unix systems. One is Redhat Linux and the other is
Sun Solairs.
I am runing PPP on my Linux machine but not on my Solaris
machine. TCP/IP connects the two machines.
I want to pick up PPP on both machines simultaneously with
only one dial up connection on my linux machine.
... (4 Replies)
hello
I am workin with PPP to send data from dos machine to unix & Linux machine using FTP with help of fax & voice modem(Caller id Enabled & Exchange provides facility). i need to identify phone(number) connect with Dos machine i.e. to identify from where data is send. so i want to get the... (0 Replies)
Hi,
I am using linux-2.6.10 mandrake. In which i am establishing PPP sessions with the peer.During the PPP negotiations i negotiate even CCP-deflate compression option.
I just wanted to know the amount of memory which is being used in kernel space by the compression algorithms,when a ccp... (0 Replies)
Background: I have been running Solaris 8 on an Ultra5 with 128MB and 4GB disk for years without upgrade. If it ain’t broke, don’t fix it.
Now my ISP has upgraded their software, and no longer talks to my old (asppp!) software.
Sun no longer ships newer versions of Solaris 8. So I bought Solaris... (1 Reply)
Hello all,
I am trying to establish two ppp connections using chap authentication over dial-up. I am using the generic connect scripts and can connect to the first server but when I try to connect the second while the first one is connected there is a chat timeout that occurs.
Any... (6 Replies)
Hello all..
I need to script SLIP dial-up connections and wanted ask others about the following;
- does pppd support SLIP (noticed some releases do and some don't)
- if pppd doesn't support SLIP can bash variables be passed to a dip script (e.g. phone-number, ip-address)
- or is another... (0 Replies)
Hey guys!
I'm not an english native-speaker, so, excuse me please, if my English isn't the best.
And I'm also not sure if I'm in the right forum. I'm Newbie so i postet it here. So if this post is in the wrong category, i bet you to bring it in the correct one (may in the... (1 Reply)
Hi all,
I have an Siemens IoT2020 with a Sim7000e cellular board that I connect via USB to the board and connect to Telstra Cat-M1 network.
I can send and receive SMS and do so using Node-Red but can also do with Minicom etc. When connected I get :
root@iot2000:~# dmesg | grep USB
ACPI:... (0 Replies)
Discussion started by: antc
0 Replies
LEARN ABOUT NETBSD
uhmodem
UHMODEM(4) BSD Kernel Interfaces Manual UHMODEM(4)NAME
uhmodem -- USB support for Huawei 3G wireless modem device
SYNOPSIS
uhmodem* at uhub?
ucom* at uhmodem?
HARDWARE
The uhmodem driver supports the following adapters:
Huawei E220
E-mobile D01HW
E-mobile D02HW
NTT DoCoMo a2502
DESCRIPTION
The uhmodem driver provides support for the Huawei 3G wireless modems and its variants. This type of device has multiple com ports. And
some modems have own storage to contain its device driver (for Windows). The uhmodem driver can handle all of these functions on the device.
When the device attached, it will attach multiple ucom devices. The former one is main com device to use communication with your network
provider, and others are sub com devices to monitor the condition of data communication and/or network status. These com devices can be used
simultaneously.
The device is accessed through the ucom(4) driver which makes it behave like a tty(4).
SEE ALSO tty(4), ubsa(4), ucom(4), usb(4)HISTORY
The uhmodem driver first appeared in NetBSD 5.0. Separate from ubsa driver.
BSD January 8, 2008 BSD
03-16-2012
FreeBSD 8.2 Huawei E1750 ppp
