Uh, I just googled this thread and wanted to contribute, I hope it's not considered necroing, since the last reply was quite some time ago, and I'm not even using any SuSE..
This is my Lemote YeeLoong 8089B that I bought in China. I had the chance to even talk to some people who worked on the chinese Loongson-2f processor design at the University of Technology in Beijing (that's the CPU in the YeeLoong), it's running Debian Wheezy/sid modified to work on the Loongson's slighty changed MIPSEL arch with PMON2000 firmware:
Code:
system type : lemote-yeeloong-2f-8.9inches
processor : 0
cpu model : ICT Loongson-2 V0.3 FPU V0.1
BogoMIPS : 528.38
wait instruction : yes
microsecond timers : yes
tlb_entries : 64
extra interrupt vector : no
hardware watchpoint : yes, count: 0, address/irw mask: []
ASEs implemented :
shadow register sets : 1
kscratch registers : 0
core : 0
VCED exceptions : not available
And here a hacked open Buffalo TeraStation III NAS running some custom Linux with Busybox, the CPU is an ARM926 (v5 arch level), optimized by Marvell, effectively changing the processor pipeline to do out-of-order execution:
Code:
Processor : ARM926EJ-S rev 0 (v5l)
BogoMIPS : 956.82
Features : swp half thumb fastmult vfp edsp
CPU implementer : 0x41
CPU architecture: 5TE
CPU variant : 0x1
CPU part : 0x926
CPU revision : 0
Cache type : write-back
Cache clean : cp15 c7 ops
Cache lockdown : format C
Cache format : Harvard
I size : 32768
I assoc : 4
I line length : 32
I sets : 256
D size : 32768
D assoc : 4
D line length : 32
D sets : 256
Hardware : Feroceon-MV78XX0
Revision : 0000
Serial : 0000000000000000
hi,
we all know /proc is about the information of active process,
I have just read an artical which said you can use /proc/cpuinfo,
/proc/net./proc/meminfo etc. to know about some hardware
information .But I want to know how to use with command line? (1 Reply)
I did a search on this, but didn't find exactly the answer I'm looking for. What exactly is the proc directory for? Showing processes spawned by users? I ask because I have some very large files in that directory by multiple users and its affecting my disk usage. Can you limit how many... (2 Replies)
Hi,
What are the various way's to fix /proc folder in redhat linux 7.2 and how to verify /proc folder is proper or croupted?
Thank in advance
Bache Gowda (7 Replies)
:)
hi all !
Please help me
When I select data from oracle with proc * C prog.
I count the number of rows
For example the total rows is 1000000
but the number of result return is a limit number 5000 for ex
So How can I know this limit (5 Replies)
Perhaps this is a very dummy question but sorry I don't know other place to do it. We just buy a new cluster of Xeon machines but there is something I don't understand and perhaps someone can help me.
The more /proc/cpuinfo produces the following output (just part of it).
processor : 0... (1 Reply)
Hi,
I am trying to calculate the CPU Usage by getting the difference between the idle time reported by /proc/stat at 2 different intervals. Now the 4th entry in the first line of /proc/stat will give me the 'idle time'. But I also came across /proc/uptime that gives me 2 entries : 1st one as the... (0 Replies)
So, I'm looking over /proc/cpuinfo and have a question... I've read that "siblings" refers to hyperthreading, but that seems odd considering the contents of cpuinfo. Here's a part:
model name : Intel(R) Xeon(R) CPU E5410 @ 2.33GHz
physical id : 0
siblings : 4
core... (1 Reply)
If you are adding the kernel module without any module parameter passing, it should print out following information to info1 file so that user can make read access to info1 file (via, for example, cat /proc/info1):
• Processor type
• Kernel version
• Total number of the processes currently... (1 Reply)
Hi,
I wanted to understand what exactly /proc/cpuinfo shows?
We have a machine with following specification...
(2x) Intel Xeon 6-core processors
So, ideally it shouls have 12processors, but the output on /proc/cpuinfo shows 24 processors.
Can someone please explain how this is... (3 Replies)
Discussion started by: shrshah64
3 Replies
LEARN ABOUT DEBIAN
linux-version
LINUX-VERSION(1) General Commands Manual LINUX-VERSION(1)NAME
linux-version - operate on Linux kernel version strings
SYNOPSIS
linux-version compare VERSION1 OP VERSION2
linux-version sort [--reverse] [VERSION1 VERSION2 ...]
linux-version list [--paths]
DESCRIPTION
linux-version operates on Linux kernel version strings as reported by uname -r and used in file and directory names. These version strings
do not follow the same rules as Debian package version strings and should not be compared as such or as arbitrary strings.
compare VERSION1 OP VERSION2
Compare version strings, where OP is a binary operator. linux-version returns success (zero result) if the specified condition is
satisfied, and failure (nonzero result) otherwise. The valid operators are: lt le eq ne ge gt
sort [--reverse] [VERSION1 VERSION2 ...]
Sort the given version strings and print them in order from lowest to highest. If the --reverse option is used, print them in order
from highest to lowest.
If no version strings are given as arguments, the version strings will instead be read from standard input, one per line. They may
be suffixed by arbitrary text after a space, which will be included in the output. This means that, for example:
linux-version list --paths | linux-version sort --reverse
will list the installed versions and corresponding paths in order from highest to lowest version.
list [--paths]
List kernel versions installed in the customary location. If the --paths option, show the corresponding path for each version.
AUTHOR
linux-version and this manual page were written by Ben Hutchings as part of the Debian linux-base package.
30 March 2011 LINUX-VERSION(1)
03-16-2012
cpuinfo
