Uh, I just googled this thread and wanted to contribute, I hope it's not considered necroing, since the last reply was quite some time ago, and I'm not even using any SuSE..
This is my Lemote YeeLoong 8089B that I bought in China. I had the chance to even talk to some people who worked on the chinese Loongson-2f processor design at the University of Technology in Beijing (that's the CPU in the YeeLoong), it's running Debian Wheezy/sid modified to work on the Loongson's slighty changed MIPSEL arch with PMON2000 firmware:
Code:
system type : lemote-yeeloong-2f-8.9inches
processor : 0
cpu model : ICT Loongson-2 V0.3 FPU V0.1
BogoMIPS : 528.38
wait instruction : yes
microsecond timers : yes
tlb_entries : 64
extra interrupt vector : no
hardware watchpoint : yes, count: 0, address/irw mask: []
ASEs implemented :
shadow register sets : 1
kscratch registers : 0
core : 0
VCED exceptions : not available
And here a hacked open Buffalo TeraStation III NAS running some custom Linux with Busybox, the CPU is an ARM926 (v5 arch level), optimized by Marvell, effectively changing the processor pipeline to do out-of-order execution:
Code:
Processor : ARM926EJ-S rev 0 (v5l)
BogoMIPS : 956.82
Features : swp half thumb fastmult vfp edsp
CPU implementer : 0x41
CPU architecture: 5TE
CPU variant : 0x1
CPU part : 0x926
CPU revision : 0
Cache type : write-back
Cache clean : cp15 c7 ops
Cache lockdown : format C
Cache format : Harvard
I size : 32768
I assoc : 4
I line length : 32
I sets : 256
D size : 32768
D assoc : 4
D line length : 32
D sets : 256
Hardware : Feroceon-MV78XX0
Revision : 0000
Serial : 0000000000000000
hi,
we all know /proc is about the information of active process,
I have just read an artical which said you can use /proc/cpuinfo,
/proc/net./proc/meminfo etc. to know about some hardware
information .But I want to know how to use with command line? (1 Reply)
I did a search on this, but didn't find exactly the answer I'm looking for. What exactly is the proc directory for? Showing processes spawned by users? I ask because I have some very large files in that directory by multiple users and its affecting my disk usage. Can you limit how many... (2 Replies)
Hi,
What are the various way's to fix /proc folder in redhat linux 7.2 and how to verify /proc folder is proper or croupted?
Thank in advance
Bache Gowda (7 Replies)
:)
hi all !
Please help me
When I select data from oracle with proc * C prog.
I count the number of rows
For example the total rows is 1000000
but the number of result return is a limit number 5000 for ex
So How can I know this limit (5 Replies)
Perhaps this is a very dummy question but sorry I don't know other place to do it. We just buy a new cluster of Xeon machines but there is something I don't understand and perhaps someone can help me.
The more /proc/cpuinfo produces the following output (just part of it).
processor : 0... (1 Reply)
Hi,
I am trying to calculate the CPU Usage by getting the difference between the idle time reported by /proc/stat at 2 different intervals. Now the 4th entry in the first line of /proc/stat will give me the 'idle time'. But I also came across /proc/uptime that gives me 2 entries : 1st one as the... (0 Replies)
So, I'm looking over /proc/cpuinfo and have a question... I've read that "siblings" refers to hyperthreading, but that seems odd considering the contents of cpuinfo. Here's a part:
model name : Intel(R) Xeon(R) CPU E5410 @ 2.33GHz
physical id : 0
siblings : 4
core... (1 Reply)
If you are adding the kernel module without any module parameter passing, it should print out following information to info1 file so that user can make read access to info1 file (via, for example, cat /proc/info1):
• Processor type
• Kernel version
• Total number of the processes currently... (1 Reply)
Hi,
I wanted to understand what exactly /proc/cpuinfo shows?
We have a machine with following specification...
(2x) Intel Xeon 6-core processors
So, ideally it shouls have 12processors, but the output on /proc/cpuinfo shows 24 processors.
Can someone please explain how this is... (3 Replies)
Discussion started by: shrshah64
3 Replies
LEARN ABOUT NETBSD
cpuset_set
CPUSET(3) BSD Library Functions Manual CPUSET(3)NAME
cpuset_create, cpuset_destroy, cpuset_zero, cpuset_set, cpuset_clr, cpuset_isset, cpuset_size -- dynamic CPU sets
SYNOPSIS
#include <sched.h>
cpuset_t *
cpuset_create(void);
void
cpuset_destroy(cpuset_t *set);
void
cpuset_zero(cpuset_t *set);
int
cpuset_set(cpuid_t cpu, cpuset_t *set);
int
cpuset_clr(cpuid_t cpu, cpuset_t *set);
int
cpuset_isset(cpuid_t cpu, const cpuset_t *set);
size_t
cpuset_size(const cpuset_t *set);
DESCRIPTION
This section describes the functions used to create, set, use and destroy the dynamic CPU sets.
This API can be used with the POSIX threads, see pthread(3) and affinity(3).
The ID of the primary CPU in the system is 0.
FUNCTIONS
cpuset_create()
Allocates and initializes a clean CPU-set. Returns the pointer to the CPU-set, or NULL on failure.
cpuset_destroy(set)
Destroy the CPU-set specified by set.
cpuset_zero(set)
Makes the CPU-set specified by set clean, that is, memory is initialized to zero bytes, and none of the CPUs set.
cpuset_set(cpu, set)
Sets the CPU specified by cpu in set. Returns zero on success, and -1 if cpu is invalid.
cpuset_clr(cpu, set)
Clears the CPU specified by cpu in the CPU-set set. Returns zero on success, and -1 if cpu is invalid.
cpuset_isset(cpu, set)
Checks if CPU specified by cpu is set in the CPU-set set. Returns the positive number if set, zero if not set, and -1 if cpu is
invalid.
cpuset_size(set)
Returns the size in bytes of CPU-set specified by set.
SEE ALSO affinity(3), pset(3), sched(3), schedctl(8), kcpuset(9)HISTORY
The dynamic CPU sets appeared in NetBSD 5.0.
BSD November 2, 2011 BSD
03-16-2012
cpuinfo
