03-14-2012
I agree with admin_xor and although it has been a few years since I was heavily involved in SCO, I remember being able to add multiple static routes; very handy with multiple network cards installed connecting to different subnets. I think SCO is a little different when compared to "standard unix" in this respect.
This User Gave Thanks to hicksd8 For This Post:
10 More Discussions You Might Find Interesting
1. Debian
Ok, I made changes to my routing tables..... which file do I modify to make the routes initialize correctly when the machine boots up? I work with all flavours of Unix/Linux... but this is an older box...
Linux, Release 2.2.14-5.0.
I did a grep for the default route in /etc, but didnt find... (2 Replies)
Discussion started by: djsal
2 Replies
2. SCO
Hi,
I add following routes manually each time system reboots:
#route add 192.168.1.0 -gateway 192.168.0.90
#route add 192.168.200.0 -gateway 192.168.0.200
Is there any way in SCO 7.1.1 to automate this route add process? i.e. each time system reboots, it automatically adds these routes in... (1 Reply)
Discussion started by: tayyabq8
1 Replies
3. Solaris
Hi there
When adding a route (or indeed deleting a route) which file is amended ? I am moving a box from one network to another and when it starts up it tries to connect run 'add net 192.x.x.x' etc etc ...but i dont want it to do that
where do I edit these route additions
cheers (5 Replies)
Discussion started by: hcclnoodles
5 Replies
4. AIX
I added a static route through smit using:
Communications applications and Services ==>
TCIP/IP ==>
Further Configuration ==>
Static Routes ==>
Add a Static Route ==>
Route Type of host
Filled in Destination Address, Default Gateway Address and Network Interface of en0.
This... (2 Replies)
Discussion started by: jyoung
2 Replies
5. Solaris
Hi,
I need help to add new route:
10.252.0.138, GW 10.252.0.129 to e1000g1
and
10.252.0.10, GW 10.252.0.1 to e1000g2
tnx (4 Replies)
Discussion started by: mehrdad68
4 Replies
6. IP Networking
hello, i need help on setting my coyote linux, i've working on this for last 5 days, can't get it to work. I've been posting this message to coyote forum, and other linux forum, but haven't get any answer yet. Hope someone here can help me...... please see my attached picture first.
... (0 Replies)
Discussion started by: dlwoaud
0 Replies
7. SCO
Hi all,
n00b here. We currently have 3 SCO 5.0.5 machines in our network that run a mission management system.
Our internal network was always a 10.0.0.0 network and the machines worked fine.
Our company is going through a network upgrade for VoIP and some of our departments are now on... (5 Replies)
Discussion started by: gibson_hg
5 Replies
8. Programming
I'm writing a program which uses curl to be run on Linux PCs which will be used by a number of different users. I cannot make the users all install curl on their individual machines, so I have tried to link curl in statically, rather than using libcurl.so. I downloaded the source and created a... (8 Replies)
Discussion started by: BrandonShw
8 Replies
9. Red Hat
Hi All,
Is there a quick way to check whether the current routes on my centos are
persistent or not before rebooting ?
i can take a route -n output but i may completely lost access to my server if the routes are gone.
thanks. (1 Reply)
Discussion started by: coolatt
1 Replies
10. Red Hat
I have three systems A,B,C. I want to configure A in such a way that all packets from A to C goes via B.
I tried:
1. ip route add 'ip of C' via 'ip of B'
2. route add -net 'net address' netmask gw 'ip of B'
These commands work initially when I try a ping or traceroute and expire after... (2 Replies)
Discussion started by: kanak
2 Replies
LEARN ABOUT REDHAT
mkfs.bfs
MKFS.BFS(8) System Administration MKFS.BFS(8)
NAME
mkfs.bfs - make an SCO bfs filesystem
SYNOPSIS
mkfs.bfs [options] device [block-count]
DESCRIPTION
mkfs.bfs creates an SCO bfs filesystem on a block device (usually a disk partition or a file accessed via the loop device).
The block-count parameter is the desired size of the filesystem, in blocks. If nothing is specified, the entire partition will be used.
OPTIONS
-N, --inodes number
Specify the desired number of inodes (at most 512). If nothing is specified, some default number in the range 48-512 is picked
depending on the size of the partition.
-V, --vname label
Specify the volume label. I have no idea if/where this is used.
-F, --fname name
Specify the filesystem name. I have no idea if/where this is used.
-v, --verbose
Explain what is being done.
-c This option is silently ignored.
-l This option is silently ignored.
-h, --help
Display help text and exit.
-V, --version
Display version information and exit. Option -V only works as --version when it is the only option.
EXIT CODES
The exit code returned by mkfs.bfs is 0 when all went well, and 1 when something went wrong.
SEE ALSO
mkfs(8)
AVAILABILITY
The mkfs.bfs command is part of the util-linux package and is available from https://www.kernel.org/pub/linux/utils/util-linux/.
util-linux July 2011 MKFS.BFS(8)