Sponsored Content
Full Discussion: Static routes in SCO
Operating Systems SCO Static routes in SCO Post 302607107 by admin_xor on Tuesday 13th of March 2012 03:16:25 PM
Old 03-13-2012
Who told it's mandatory to add static routes on UNIX servers? If you have a router in place, just make an entry for default gateway (IP of the Router's interface connected to the server) on the UNIX server and that's it. Your router should be able to route the packets to and from the UNIX server. In case if you do not have a dedicated router and your network is small enough (why would anyone need multiple subnets in that case!!), you may enable static routes in your UNIX server.
This User Gave Thanks to admin_xor For This Post:
 

10 More Discussions You Might Find Interesting

1. Debian

Setting Routes and such

Ok, I made changes to my routing tables..... which file do I modify to make the routes initialize correctly when the machine boots up? I work with all flavours of Unix/Linux... but this is an older box... Linux, Release 2.2.14-5.0. I did a grep for the default route in /etc, but didnt find... (2 Replies)
Discussion started by: djsal
2 Replies

2. SCO

how to add default routes in SCO

Hi, I add following routes manually each time system reboots: #route add 192.168.1.0 -gateway 192.168.0.90 #route add 192.168.200.0 -gateway 192.168.0.200 Is there any way in SCO 7.1.1 to automate this route add process? i.e. each time system reboots, it automatically adds these routes in... (1 Reply)
Discussion started by: tayyabq8
1 Replies

3. Solaris

Where are routes stored ?

Hi there When adding a route (or indeed deleting a route) which file is amended ? I am moving a box from one network to another and when it starts up it tries to connect run 'add net 192.x.x.x' etc etc ...but i dont want it to do that where do I edit these route additions cheers (5 Replies)
Discussion started by: hcclnoodles
5 Replies

4. AIX

Static Routes question

I added a static route through smit using: Communications applications and Services ==> TCIP/IP ==> Further Configuration ==> Static Routes ==> Add a Static Route ==> Route Type of host Filled in Destination Address, Default Gateway Address and Network Interface of en0. This... (2 Replies)
Discussion started by: jyoung
2 Replies

5. Solaris

Add Static Routes to new physical address

Hi, I need help to add new route: 10.252.0.138, GW 10.252.0.129 to e1000g1 and 10.252.0.10, GW 10.252.0.1 to e1000g2 tnx (4 Replies)
Discussion started by: mehrdad68
4 Replies

6. IP Networking

I need HELP to Set up Coyote Linux router with 1 static IP & 64 internal static IP

hello, i need help on setting my coyote linux, i've working on this for last 5 days, can't get it to work. I've been posting this message to coyote forum, and other linux forum, but haven't get any answer yet. Hope someone here can help me...... please see my attached picture first. ... (0 Replies)
Discussion started by: dlwoaud
0 Replies

7. SCO

SCO 5.0.5 Add routes for new networks

Hi all, n00b here. We currently have 3 SCO 5.0.5 machines in our network that run a mission management system. Our internal network was always a 10.0.0.0 network and the machines worked fine. Our company is going through a network upgrade for VoIP and some of our departments are now on... (5 Replies)
Discussion started by: gibson_hg
5 Replies

8. Programming

Even the Static cURL Library Isn't Static

I'm writing a program which uses curl to be run on Linux PCs which will be used by a number of different users. I cannot make the users all install curl on their individual machines, so I have tried to link curl in statically, rather than using libcurl.so. I downloaded the source and created a... (8 Replies)
Discussion started by: BrandonShw
8 Replies

9. Red Hat

Centos-quick way to check if static routes are persistent

Hi All, Is there a quick way to check whether the current routes on my centos are persistent or not before rebooting ? i can take a route -n output but i may completely lost access to my server if the routes are gone. thanks. (1 Reply)
Discussion started by: coolatt
1 Replies

10. Red Hat

How to set static routes for packets, within the same Network?

I have three systems A,B,C. I want to configure A in such a way that all packets from A to C goes via B. I tried: 1. ip route add 'ip of C' via 'ip of B' 2. route add -net 'net address' netmask gw 'ip of B' These commands work initially when I try a ping or traceroute and expire after... (2 Replies)
Discussion started by: kanak
2 Replies
defaultrouter(4)						   File Formats 						  defaultrouter(4)

NAME
defaultrouter - configuration file for default router(s) SYNOPSIS
/etc/defaultrouter DESCRIPTION
The /etc/defaultrouter file specifies a IPv4 host's default router(s). The format of the file is as follows: IP_address ... The /etc/defaultrouter file can contain the IP addresses or hostnames of one or more default routers, with each entry on its own line. If you use hostnames, each hostname must also be listed in the local /etc/hosts file, because no name services are running at the time that defaultrouter is read. Lines beginning with the ``#'' character are treated as comments. The default routes listed in this file replace those added by the kernel during diskless booting. An empty /etc/defaultrouter file will cause the default route added by the kernel to be deleted. Use of a default route, whether received from a DHCP server or from /etc/defaultrouter, prevents a machine from acting as an IPv4 router. You can use routeadm(1M) to override this behavior. FILES
/etc/defaultrouter Configuration file containing the hostnames or IP addresses of one or more default routers. SEE ALSO
in.rdisc(1M), in.routed(1M), routeadm(1M), hosts(4) SunOS 5.10 17 Aug 2004 defaultrouter(4)
All times are GMT -4. The time now is 09:05 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy