03-09-2012
Cannot Boot Cd TO Install Solaris 11
Recently our school acquired a number of Sun Blade 100 systems from a university that was previously using them as a computational cluster. We intend to rig them to do the same thing, but they failed to give us the head node, and all the machines we have are still configured to boot from network. I've managed to turn off auto-boot so I can reach the ok prompt, but having never used Solaris or a Sun system for that matter, I have no clue where to go since none of the boot devices seem to work. I've tried the various combinations of boot commands for the cdrom drives, but it can never seem to open boot device.
Thinking it might have been an error in the hardware, I replaced the CD drive to an old HP CD Writer Plus 8200 series, jumped it to be master on the actual drive, and tried again. Still no luck. I haven't an idea where to go from now since I've never used OpenBoot before and can't seem to figure the correct arguments to try and locate the thing myself. I'm using a burned Solaris 11 Express disc if that makes a difference. (hence why I tried a new drive)
Any outputs you may need, feel free to ask. I don't know if I can pipe it anywhere, so I'll just type it up.
7 More Discussions You Might Find Interesting
1. Solaris
When I installed the SOLARIS 10 OS first time, the desktop would not start up, this was because of network setup. Reinstalled worked. After a week due to some problem I had to reinstall OS, installation went fine and but when i reboot I get this error.
cannot find mis/krtld
boot error loading... (0 Replies)
Discussion started by: johncy_j
0 Replies
2. Solaris
Hi
I hv try to install Solaris 9 on a SPARC machine. The machine now is with Solaris 10 OS.
I try to load a Solaris 9 installation cd in and use "boot cdrom" on ok promt, but it give me "no boot device found" when it boot up.
and when i use fsck, the system show me an error with the... (2 Replies)
Discussion started by: niuniu
2 Replies
3. Solaris
Hi all ,
I have an E2900 SPARC IV that has Solaris 10 installed , I am trying to replace solaris 10 with soalris 9/04 , But the installation is giving me an error:
Cannot assemble drivers for root /ssm@0,0/pci@18,700000/pci@4/ide@2/cdrom@0,0:b
Cannot mount root on... (3 Replies)
Discussion started by: ppass
3 Replies
4. Solaris
I am trying to install Solaris x86 using the Jumpstart server. I run the add_install_client command with appropriate options, and reboot my x86 Target box. The installation starts fine and unattended. After the installation completes and the target goes for a re-boot, it does not boot from the HDD... (9 Replies)
Discussion started by: hemalsid
9 Replies
5. Solaris
I am trying to build a Sun Ultra 10 with solaris 10. This computer is one of a collection that was donated to the non-profic company I work for. All media was wiped before I recieved them, so I am starting from stratch.
I downloaded the Solaris 10 ISO and burned a DVD. The computer came with a... (4 Replies)
Discussion started by: gwillhight
4 Replies
6. Solaris
Hello,
I cant get my blade box to boot off the harddrive after installing solaris 10.I can get to a root prompt after issuing "boot cdrom -s".I tried booting off disk0 and disk1,but I get "the file just loaded does not seem to be executable".Thanks for any help.:wall: (4 Replies)
Discussion started by: chucky
4 Replies
7. Solaris
Hello,
I have a problem with my machine that won't boot properly.
The story is that I installed a software called apcupsd, which is a control application for my APC battery UPS. I have used version 3.14.10 earlier, but as part of restoring my previously crashed os harddrive I wanted to... (18 Replies)
Discussion started by: Zorken
18 Replies
LEARN ABOUT HPUX
install-solaris
install-solaris(1M) install-solaris(1M)
NAME
install-solaris - install the Solaris operating system
SYNOPSIS
install-solaris
install-solaris invokes the Solaris Install program. Depending on graphical capability and available memory at the time of invocation,
install-solaris invokes either a text-based installer or a graphical installer.
The following minimum requirements for physical memory dictate which features are available during installation:
For SPARC machines:
128 MB
Minimum physical memory for all installation types
128 MB
Minimum physical memory required for windowing system
384 MB
Minimum physical memory required for graphical-based installation
For x86 machines:
256 MB
Minimum physical memory for all installation types
256 MB
Minimum physical memory required for windowing system
512 MB
Minimum physical memory required for graphical-based installation
In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number of fea-
tures available.
install-solaris exists only on the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the for more
details.
install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the
installation media. Refer to the for disk space requirements.
Refer to the for more information on the various menus and selections.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcdrom (Solaris instal- |
| |lation media) |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
pkginfo(1), install(1M), pkgadd(1M), attributes(5)
It is advisable to exit install-solaris by means of the exit options in the install-solaris menus.
23 Sep 2005 install-solaris(1M)