I know there are other threads but they have not helped. My server is running low on disk space and I haven't been able to re-allocate. I think my solaris machine is missing tools or the way it was originally setup, may not have the right pathing.
So I have one at 100% and 2 at over 90%. It hasn't started affecting the server yet. vfstab will not run and I am unable to find other Solaris commands or tools that my server might have to re-allocate the low disk space. I am not sure what we can delete, as far as files or logs. I can check with my main developer on that server, but I wanted to try re-allocation first.
Hi
I'm trying to install gcc and the installation program tells me that I'm out of disk space! I have just installed the os (using the default settings for partitions and sizes) and have only installed apache on the machine. Can it really be out of disk space already?
How do I check how much... (4 Replies)
Hello,
Can someone please tell me which command to use to determine the available disk space on a given disk device?
I have to write a shell script that compresses files and stores them in a specific location but I am not sure how "conservative" I should be?
Thanks in advance!
Al. (4 Replies)
I'm a Unix newbie running Solaris 9. After installing a fresh copy on a 40GB drive I noticed the available disk space is 2% free or approximately 200MB available. Is that possible? Did I do something wrong? (4 Replies)
Hi Experts.
I had 100% disk full , even though i have removed 2 GB space still dbf command shows 100%.
How to rectify that. Appreciate your prompt help. Thanks (1 Reply)
Hello All-
Am new member to this forum. Have some unix experience. But true believer in it compared to windows.
Have a question regarding the disk space.
I know a command to check the total disk space utilization using:
df -k .
but what is the command to check the same disk space by... (6 Replies)
Hi
This is my script for disk space monitoring
clear
if
then
echo "You must be root user to execute the script"
fi
ALERT_LEVEL=10
CONSUMPTION_LEVEL= `df -k | awk {'print $5'} | cut -d '%' -f1 | sed "1 d"`
for i in $CONSUMPTION_LEVEL
do
FILE_SYSTEM=`df -k | awk {'print $1'} |... (3 Replies)
Hi Guys
i have a nice little piece of code then i need to modify so that is does not look at /Voulmes/*
thanks
sub disk_full {
my $i = 0;
open( DF, "df -l|" );
while (<DF>) {
#chomp();
next if (/^\/proc\b/);
$i++;
next if ( $i == 1 );
... (3 Replies)
Hi,
I am new to shell scripting, and want to monitor disk space using shell script continously on server, which will shoot mail after crossing threshold limit
Please suggest.
Regards
Manoj (1 Reply)
Hi,
I am installing TAM-eb components in solaris V10.o, unfortunately am running out of space. when I -df i come across a lot of directories. i would like to know whether there is any way to free some disk space. (10 Replies)
Hi,
I have this :
uname -a
Linux servername 2.6.18-194.11.3.el5PAE #1 SMP Mon Aug 23 15:57:10 EDT 2010 i686 i686 i386 GNU/Linux
df -k
Sys. de fich. 1K-blocs Occupied Disponible Capacity Monted on
/u01/applis 10321208 3190160 6606760 33% /applis
Does it mean... (1 Reply)
Discussion started by: big123456
1 Replies
LEARN ABOUT SUNOS
vfstab
vfstab(4) File Formats vfstab(4)NAME
vfstab - table of file system defaults
DESCRIPTION
The file /etc/vfstab describes defaults for each file system. The information is stored in a table with the following column headings:
device device mount FS fsck mount mount
to mount to fsck point type pass at boot options
The fields in the table are space-separated and show the resource name (device to mount), the raw device to fsck (device to fsck), the
default mount directory (mount point), the name of the file system type (FS type), the number used by fsck to decide whether to check the
file system automatically (fsck pass), whether the file system should be mounted automatically by mountall (mount at boot), and the file
system mount options (mount options). (See respective mount file system man page below in SEE ALSO for mount options.) A '-' is used to
indicate no entry in a field. This may be used when a field does not apply to the resource being mounted.
The getvfsent(3C) family of routines is used to read and write to /etc/vfstab.
/etc/vfstab can be used to specify swap areas. An entry so specified, (which can be a file or a device), will automatically be added as a
swap area by the /sbin/swapadd script when the system boots. To specify a swap area, the device-to-mount field contains the name of the
swap file or device, the FS-type is "swap", mount-at-boot is "no" and all other fields have no entry.
EXAMPLES
The following are vfstab entries for various file system types supported in the Solaris operating environment.
Example 1: NFS and UFS Mounts
The following entry invokes NFS to automatically mount the directory /usr/local of the server example1 on the client's /usr/local directory
with read-only permission:
example1:/usr/local - /usr/local nfs - yes ro
The following example assumes a small departmental mail setup, in which clients mount /var/mail from a server mailsvr. The following entry
would be listed in each client's vfstab:
mailsvr:/var/mail - /var/mail nfs - yes intr,bg
The following is an example for a UFS file system in which logging is enabled:
/dev/dsk/c2t10d0s0 /dev/rdsk/c2t10d0s0 /export/local ufs 3 yes logging
See mount_nfs(1M) for a description of NFS mount options and mount_ufs(1M) for a description of UFS options.
Example 2: pcfs Mounts
The following example mounts a pcfs file system on a fixed hard disk on an x86 machine:
/dev/dsk/c1t2d0p0:c - /win98 pcfs - yes -
The example below mounts a Jaz drive on a SPARC machine. Normally, the volume management daemon (see vold(1M)) handles mounting of remov-
able media, obviating a vfstab entry. If you choose to specify a device that supports removable media in vfstab, be sure to set the mount-
at-boot field to no, as below. Such an entry presumes you are not running vold.
/dev/dsk/c1t2d0s2:c - /jaz pcfs - no -
For removable media on a SPARC machine, the convention for the slice portion of the disk identifier is to specify s2, which stands for the
entire medium.
For pcfs file systems on x86 machines, note that the disk identifier uses a p (p0) and a logical drive (c, in the /win98 example above) for
a pcfs logical drive. See mount_pcfs(1M) for syntax for pcfs logical drives and for pcfs-specific mount options.
Example 3: CacheFS Mount
Below is an example for a CacheFS file system. Because of the length of this entry and the fact that vfstab entries cannot be continued to
a second line, the vfstab fields are presented here in a vertical format. In re-creating such an entry in your own vfstab, you would enter
values as you would for any vfstab entry, on a single line.
device to mount: svr1:/export/abc
device to fsck: /usr/abc
mount point: /opt/cache
FS type: cachefs
fsck pass: 7
mount at boot: yes
mount options:
local-access,bg,nosuid,demandconst,backfstype=nfs,cachedir=/opt/cache
See mount_cachefs(1M) for CacheFS-specific mount options.
Example 4: Loopback File System Mount
The following is an example of mounting a loopback (lofs) file system:
/export/test - /opt/test lofs - yes -
See lofs(7FS) for an overview of the loopback file system.
SEE ALSO fsck(1M), mount(1M), mount_cachefs(1M), mount_hsfs(1M), mount_nfs(1M), mount_tmpfs(1M), mount_ufs(1M), swap(1M), getvfsent(3C)
System Administration Guide: Basic Administration
SunOS 5.10 21 Jun 2001 vfstab(4)