I have a really strange issue on Solaris 10 running on v490. I'm running Oracle 10g on the box. Everything runs fine and all of a sudden I get a call from a DBA. I check and none of the Oracle processes are running. They were definitely running after the system booted and nobody stopped them. I try... (0 Replies)
Hey guys,
I was using ssh-keygen settings for a long time to login on remote machines without password.
2 days back it suddenly stops working, i tried by reset all ssh-keygen setting but it not works.
what could be the reason of this issue and how can i resolve this? (2 Replies)
I have 64bit 11.1 installed on a clone. The Logitech LX3 mouse stops working sometimes, forcing a reboot. The LED under the mouse goes dark when this happens. A normal ps/2 mouse works fine, and I am certain the LX3 mouse is not defective as I have an identical one on a XP system that I swapped to... (6 Replies)
My script is very simple. It call isql and then echo a message. The problem is after the 1st command (isql), it stops so that the echo line never gets executed. Can anyone let me know what is wrong?
#!/usr/bin/sh
userid=xxxx
server=xxxx
db=xxxx
pwd=xxxx
isql -U ${userid} -S ${server}... (3 Replies)
For the benefit of the community this is a widespread worldwide problem affecting multiple versions of Microsoft Windows.
Powerpoint erroneously reports Powerpoint presentation damaged and then often hangs.
Until Microsoft sort this out, try removing Powerpoint security update KB 2464588... (0 Replies)
I have made a shell script(/bin/sh) that starts a perl script (that I haven't made my self) that's starts a ssh session. The ssh session uses a private/public key to login so no password is needed. The Perl script works perfect.
But when I put it in a cronjob (crontab) the ssh connection asks... (6 Replies)
Hi'
i am runing a script thats run with a loop...while loop true.
when i exit the server..logon and again the script doenst run.
its a bash script test.sh.
i run it as:
#./test.sh &
what can be the priblem please?
thanks alot (6 Replies)
There's probably a better way to do what I'm doing and if so, let me know an alternative.
I have a script that runs rsh for every entry in a txt file to go get the file size off the remote server. I then compare the remote size with a local size.
My script worked fine until recently when I... (2 Replies)
Hello,
I'm new to this forum and like to first of all say hello to everyone.
I've got a really annoying problem at the moment.
I'm trying to rsync some files (about 200MB with one file of 120MB) from a Raspberry PI with raspbian to a debian server via rsync.
This procedure is stored in a... (3 Replies)
Good Morning,
I have a copy script on Solaris 9 machine that is supposed to copy some files to a NAS using: cp -r /dir/dir/ /dir/dir/dirThe script doesn't finish. The directory contains user files of which one seems to copy fine, a second was failing until I did achmod -R -777 to it. Now,... (6 Replies)
Discussion started by: Stellaman1977
6 Replies
LEARN ABOUT DEBIAN
router.db
router.db(5) File Formats Manual router.db(5)NAME
router.db - rancid group configuration file
DESCRIPTION
router.db contains information for devices which are members of a rancid group. control_rancid(1) reads this file to compile a list of
devices which it should collect.
SYNTAX
One device is listed per-line, where the syntax is:
<device_name>:<device_type>:<state>[:comments]
For example:
scooby.shrubbery.net:cisco:up
The fields are as follows:
<device_name>
The name of the device, which must resolve via gethostbyname, used as the argument to telnet(1), rsh(1), or ssh(1), to connect to
the device. Once converted to lower-case, this also becomes the name of the file used to store the configuration under
$BASEDIR/<group>/configs.
Experience has shown that using the device's FQDN (Fully Qualified Domain Name) works best, as in the example above.
<device_type>
The type of device from the set:
agm A Cisco Anomaly Guard Module (aka Riverhead). Suspect that at some point the UI will become more cisco-like and it can be
merged with the IOS rancid module.
alteon An Alteon WebOS switches.
arista An Arista Networks device.
avocent
An Avocent Cyclades console server.
baynet A Bay Networks router.
cat5 A Cisco catalyst series 5000 and 4000 switches (i.e.: running the catalyst OS, not IOS).
cisco A Cisco router, PIX, or switch such as the 3500XL or 6000 running IOS (or IOS-like) OS, but not IOS-XR.
cisco-nx
A Cisco Nexus switch/router.
cisco-xr
A Cisco device running IOS-XR.
css A Cisco content services switch.
enterasys
An enterasys NAS. This is currently an alias for the riverstone device type.
erx A Juniper E-series edge router.
extreme
An Extreme switch.
ezt3 An ADC-Kentrox EZ-T3 mux.
f5 A F5 BigIP switch.
force10
A Force10 router.
fortigate
A Fortinet firewall.
foundry
A Foundry router, switch, or router-switch. This includes HP Procurve switches that are OEMs of Foundry products, such as
the HP9304M.
hitachi
A Hitachi router.
hp A HP Procurve switch such as the 2524 or 4108 procurve switches. Also see the foundry type.
juniper
A Juniper router.
mikrotik
A Mikrotik router.
mrtd A host running the (Merit) MRTd daemon.
netscalar
A Netscalar load balancer.
netscreen
A Netscreen firewall.
procket
A Procket router.
redback
A Redback router, NAS, etc.
riverstone
A Riverstone NAS or Cabletron (starting with version ~9.0.3) router.
smc A SMC switch (some Dell OEMs).
tnt A Lucent TNT.
zebra Zebra routing software.
<state>
The state is either "up", or some other arbitrary value, e.g. "down". If the device is not marked "up" the device's configuration
will not be collected. It is highly recommended that comments are made for any router not listed as up, so as to indicate the
reason a router is not to be polled, e.g.:
dial1.paris:cisco:up:
core1.paris:cisco:down:in testing until 5/5/2001.
core2.paris:cisco:ticketed:Ticket 6054234, 5/3/2001
border1.paris:juniper:up:
The script "downreport" in util/ can be used to produce a report of routers in router.db that are not marked "up".
[comments]
Freeform string to describe the current state of the router.
A ``#'' at the beginning of a line is a comment; the entire line is ignored.
If a device is deleted from the router.db file, then rancid will clean up by removing the device's config file from
$BASEDIR/<group>/configs. The device will be removed from the revision control system. It is possible, in most cases, to resurrect or
check-out copies of deleted device configurations.
FILES
$BASEDIR/<group>/router.db
Configuration file described here, where <group> is a device group name defined in the variable LIST_OF_GROUPS within
$BASEDIR/etc/rancid.conf.
SEE ALSO control_rancid(1), rancid(1), rancid.conf(5)
24 April 2011 router.db(5)