02-28-2012
p520 Service Processor's IP
picked up this old p520 , try many ways to connect to the SP..
a) null modem using a PC connecting to the lower S1 ...but see a bunch of
garbages across the screen once the main machine is off
b) try guessing the default IPs 192.168.3.147 and 192.168.2.147, for ports HMC1 and HMC2
no luck ..
However, I could hook up a graphical monitor where it comes up with a menu something like:
1. SMS Menu
8. Open Firmware Prompt
...etc and others..
Wonder if I could reset the IPs for the SP.
Thanks
10 More Discussions You Might Find Interesting
1. HP-UX
I am receiving messages from HP-UX Server
"The operating system is unable to communicate with the service processor.
The support bus which connects the system processors, the service processor and the Power Monitor or Platform Monitor may have become hung ".
I need help in the following:... (1 Reply)
Discussion started by: cgege
1 Replies
2. AIX
I dont have an ascii terminal to hook upto this thing, trying to use my laptop but it doesnt seem to want to communicate, is there a special cable i should be using for this? (1 Reply)
Discussion started by: BG_JrAdmin
1 Replies
3. AIX
hello everybody.
Has anyone tried to install aix 5.2 on p520 machines. I've been trying but in the installation menu it says, "no disk found". I've used the same CD on a different 520 server and its working fine on it. Can anyone help, please? (5 Replies)
Discussion started by: soahel
5 Replies
4. AIX
Question is on setting of Physical and Virtual processors for LPARs to make proper use of virtualization capabilities.
Environment is a 8-way p570 with 4 LPARs.
lparVIO1 and lparVIO2:
AIX 5300-04-01
Mode/Type= Shared-SMT/Capped
Minimum Processors= 0.10
Desired Processors= 0.50
Maximum... (1 Reply)
Discussion started by: guttew
1 Replies
5. AIX
Hi Folks,
I am a new AIX user. This is my first post in the UNIX forums. I did do a little bit of search before creating this post, but did not find any conclusive information. I am trying to connect to the service processor of an older 44p Model 170 box using my laptop. The 44p box has two... (6 Replies)
Discussion started by: shaell
6 Replies
6. AIX
I have software running under AIX 5.3 that should communicate with a special device using standard communication protocol (Modbus) using serial RS-232 line
The settings are correct in both sides, But I can't establish a connection.
I suspect that there's something that I should do regarding the... (3 Replies)
Discussion started by: ayman metwally
3 Replies
7. AIX
it shows up after the upgrade to SF240_415, after 2 hrs.
amber light shows up on the led of 9111-520, but alog shows:
everything seems to work, not sure what's going on.. (6 Replies)
Discussion started by: ppchu99
6 Replies
8. AIX
trying to put VIO server software into this p520, firmware upgraded to the latest and greatest..SF240_415_318 , I think
a few questions, on this practice AIX machine on AIX 7.1
VIO can only be installed if ASMI or HMC is running ???
if so, perhaps ASMI is much simpler, since I will need to... (2 Replies)
Discussion started by: ppchu99
2 Replies
9. AIX
picked up an old p520..and also spend sometimes to manage software:
a) AIX 7.1
b) VIOS Server 2.2
attempting to run a few LPARs without much more $$$$, as this is a home-made projects..
machine hdisk0, pre-installed with AIX 7.1
a few questions:
a) In order to run LPARs, I will... (7 Replies)
Discussion started by: ppchu99
7 Replies
10. Solaris
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies
FINDSMB(1) User Commands FINDSMB(1)
NAME
findsmb - list info about machines that respond to SMB name queries on a subnet
SYNOPSIS
findsmb [subnet broadcast address]
DESCRIPTION
This perl script is part of the samba(7) suite.
findsmb is a perl script that prints out several pieces of information about machines on a subnet that respond to SMB name query requests.
It uses nmblookup(1) and smbclient(1) to obtain this information.
OPTIONS
-r
Controls whether findsmb takes bugs in Windows95 into account when trying to find a Netbios name registered of the remote machine. This
option is disabled by default because it is specific to Windows 95 and Windows 95 machines only. If set, nmblookup(1) will be called
with -B option.
subnet broadcast address
Without this option, findsmb will probe the subnet of the machine where findsmb(1) is run. This value is passed to nmblookup(1) as part
of the -B option.
EXAMPLES
The output of findsmb lists the following information for all machines that respond to the initial nmblookup for any name: IP address,
NetBIOS name, Workgroup name, operating system, and SMB server version.
There will be a '+' in front of the workgroup name for machines that are local master browsers for that workgroup. There will be an '*' in
front of the workgroup name for machines that are the domain master browser for that workgroup. Machines that are running Windows for
Workgroups, Windows 95 or Windows 98 will not show any information about the operating system or server version.
The command with -r option must be run on a system without nmbd(8) running. If nmbd is running on the system, you will only get the IP
address and the DNS name of the machine. To get proper responses from Windows 95 and Windows 98 machines, the command must be run as root
and with -r option on a machine without nmbd running.
For example, running findsmb without -r option set would yield output similar to the following
IP ADDR NETBIOS NAME WORKGROUP/OS/VERSION
---------------------------------------------------------------------
192.168.35.10 MINESET-TEST1 [DMVENGR]
192.168.35.55 LINUXBOX *[MYGROUP] [Unix] [Samba 2.0.6]
192.168.35.56 HERBNT2 [HERB-NT]
192.168.35.63 GANDALF [MVENGR] [Unix] [Samba 2.0.5a for IRIX]
192.168.35.65 SAUNA [WORKGROUP] [Unix] [Samba 1.9.18p10]
192.168.35.71 FROGSTAR [ENGR] [Unix] [Samba 2.0.0 for IRIX]
192.168.35.78 HERBDHCP1 +[HERB]
192.168.35.88 SCNT2 +[MVENGR] [Windows NT 4.0] [NT LAN Manager 4.0]
192.168.35.93 FROGSTAR-PC [MVENGR] [Windows 5.0] [Windows 2000 LAN Manager]
192.168.35.97 HERBNT1 *[HERB-NT] [Windows NT 4.0] [NT LAN Manager 4.0]
VERSION
This man page is correct for version 3 of the Samba suite.
SEE ALSO
nmbd(8), smbclient(1), and nmblookup(1)
AUTHOR
The original Samba software and related utilities were created by Andrew Tridgell. Samba is now developed by the Samba Team as an Open
Source project similar to the way the Linux kernel is developed.
The original Samba man pages were written by Karl Auer. The man page sources were converted to YODL format (another excellent piece of Open
Source software, available at ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 release by Jeremy Allison. The conversion to
DocBook for Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 was done by Alexander Bokovoy.
Samba 3.5 06/18/2010 FINDSMB(1)