02-20-2012
in this configuration, half of the cpu and memory boards are in domain 1 (if 4 cpu and 8 memory modules are inside the server).
domain 0 will have the other half...
2 hdds and the dvd- and tape-drive will also belong to domain 0.
the other 2 hdds will belong to domain 1.
also every domain has one IOU board.
This User Gave Thanks to DukeNuke2 For This Post:
10 More Discussions You Might Find Interesting
1. Solaris
Hi all
A couple of new M5000 servers will be arriving soon and I need to work out how to configure the underlying domains.
It will come with 4 x CPUS, 32 Gb of memory, 4 x HD, 2 x IOtrays.
Reading the XSCF manual, I can configure the item into 2 domains, something about uni / quad xsb.... (9 Replies)
Discussion started by: sbk1972
9 Replies
2. Solaris
Hi, I've got an issue here: After I logon to the xscf prompt of this Sun M5000 and did 'XSCF> version -c xcp', the xscf prompt disappeared. I can't get it back and can't log out.
exit
rebootxscf
logout
#.
#>
#>
~#
~#
exit
sendbreak
exit
I tried to set the Mode Switch to the service... (3 Replies)
Discussion started by: aixlover
3 Replies
3. Solaris
Hi, I am now trying to setup XSCF mail reporting for a Sun M5K. There is no mail server here. Each Sun box is both its mail receiver and sender by using mailx. Mailx is working fine on this M5K.
XSCF> setsmtp
Mail Server :
Port :
Authentication Mechanism :
Reply Address:
What should I... (4 Replies)
Discussion started by: aixlover
4 Replies
4. UNIX for Advanced & Expert Users
Hi, We have two Sun M5000 systems. A is Oracle server and B is testing server. There are nine Solaris 10 zones set on A. SAN is connecting to A with ZFS configuration.
Now we want to set B to be a backup server of A and make the two as identical as possible. No VERITAS cluster, no Solaris... (3 Replies)
Discussion started by: aixlover
3 Replies
5. Solaris
Hi,
This Sun M5000 currently has a single domain (0) created. Solaris 10 is installed on this domain with some local zones. Now we need to add a secondary hardware domain (1) to this M5000. My question: Can we keep the current OS settings on domain 0 when adding the secondary domain 1?
Thank... (5 Replies)
Discussion started by: aixlover
5 Replies
6. Hardware
I have an M5K with disk issues I'm trying to troubleshoot, and it's causing me some confusion. I know the host has four on-board HDDs, but the format command's output shows c0t0d0, c0t1d0, c3t0d0, and c3t1d0. cfgadm -al shows c0t3d0 as the DVD-ROM drive, and c1 and c2 as SAN disks. Confused yet?
... (2 Replies)
Discussion started by: desertdenizen
2 Replies
7. Solaris
Hi,
I would appreciate some help.
I remotely access, across a VPN, an M5000 and when I connect to the XSCF I can then access the OS using console -d0 and then I can get to the console.
The problem I have is that I need to run something which will take many hours and I can't run it in the... (6 Replies)
Discussion started by: giles.cardew
6 Replies
8. Solaris
Trying to update my M5000 firmware. trying to mount my USB to upload firmware and getting the following message.
XSCF> getflashimage -v file:///media/usb_msd/FFXCP1115.tar.gz
Free space: 97MB
Making sure mount point is clear
umount: /media/usb_msd is not mounted (according to mtab)
Trying... (2 Replies)
Discussion started by: soupbone38
2 Replies
9. Solaris
Hi,
I'm planning to upgrade the XSCF firmware on an M5000, and have a question regarding the OBP part of the upgrade. At the moment, the system looks like this:
XCP0 (Current): 1100
OpenBoot PROM : 02.18.0000
XSCF : 01.10.0000
root@server01 # /usr/sbin/prtconf -V
OBP 4.24.15... (3 Replies)
Discussion started by: badoshi
3 Replies
10. IP Networking
I took over an M5000 and have a jumper server with a nic to connect to the console IP of an M5000. access via ssh user@ip.
it was working fine, another person can connect remotely on the subnet, but when I ssh,it just hangs and then times out.
so my question is,
any ideas of what I might... (4 Replies)
Discussion started by: rrodgers
4 Replies
LEARN ABOUT V7
asadmin-delete-domain
asadmin-delete-domain(1AS) User Commands asadmin-delete-domain(1AS)
NAME
asadmin-delete-domain, delete-domain - deletes the givendomain
SYNOPSIS
delete-domain [--terse=false] [--echo=false] [--domaindir install_dir/domains] domain_name
delete-domain deletes the specified domain. The domain must already exist and must be stopped. This command is supported in local mode
only.
OPTIONS
--domaindir directory where the domain is to be deleted. If specified, path must be accessible in the filesystem. If not speci-
fied, the domain in the default install_dir/domains directory is deleted.
--terse indicates that any output data must be very concise, typically avoiding human-friendly sentences and favoring well-
formatted data for consumption by a script. Default is false.
--echo setting to true will echo the command line statement on the standard output. Default is false.
OPERANDS
domain_name name of the domain. Must be a unique name.
Example 1: Using delete-domain
asadmin> delete-domain sampleDomain
deleted domain sampleDomain successfully
Where: the sampleDomain domain is deleted.
EXIT STATUS
0 command executed successfully
1 error in executing the command
asadmin-create-domain(1AS), asadmin-start-domain(1AS), asadmin-stop-domain(1AS), asadmin-list-domains(1AS)
J2EE 1.4 SDK March 2004 asadmin-delete-domain(1AS)