02-18-2012
mdadm to do mirroing on / and /boot
had the system configured and booted with /dev/sda1 and /dev/sda2..
trying to do raid1 using mdadm on these 2, as an after thought ..
How can it be done ??
10 More Discussions You Might Find Interesting
1. Solaris
When I installed the SOLARIS 10 OS first time, the desktop would not start up, this was because of network setup. Reinstalled worked. After a week due to some problem I had to reinstall OS, installation went fine and but when i reboot I get this error.
cannot find mis/krtld
boot error loading... (0 Replies)
Discussion started by: johncy_j
0 Replies
2. Linux
Hi,
I have a three disk raid 5, with 500GB disks.
This is close to being full, and whilst I can just add another disk and rebuild to add another 500GB, I would prefer to replace with 1TB disks. So i have some questions.
Can I replace these disks one by one with bigger disks? I... (1 Reply)
Discussion started by: snoop2048
1 Replies
3. Boot Loaders
Hello,
I have kubuntu on my laptop and now I decided to switch to Windows 7. I made the bios settings properly (first choice is boot from cd\vd) but I see the error
" reboot and select proper Boot device or insert Boot media in select Boot device and press a key "
I have tried CD and... (0 Replies)
Discussion started by: rpf
0 Replies
4. Virtualization and Cloud Computing
Hello Unix Community:
My task to figure out how to add a 20G volume to an existing EBS Array (RAID0) at AWS.
I haven't been told that growing the existing volumes isn't an option, or adding another larger volume to the existing array is the way to go. The client's existing data-store is... (0 Replies)
Discussion started by: Habitual
0 Replies
5. Emergency UNIX and Linux Support
Hi All
I have a RAID 5 array consisting of 4 drives that had a partial drive failure in one of the drives.
Rebooting shows the faulty drive as background rebuilding and mdadm /dev/ARRAYID shows three drives as in sync with the fourth drive as spare rebuilding.
However the array won't come... (9 Replies)
Discussion started by: Bashingaway
9 Replies
6. UNIX for Advanced & Expert Users
Hello, I have 4 drives (500G each) in a raid 10, I got a power failior and this is the result?
cat /proc/mdstat
Personalities :
md126 : inactive sdb sdc sdd sde
1953536528 blocks super external:-md127/0
md127 : inactive sdd(S) sde(S) sdb(S) sdc(S)
9028 blocks super... (3 Replies)
Discussion started by: rmokros
3 Replies
7. UNIX for Advanced & Expert Users
Hi everyone,
I am not sure if I understand how mdadm --create /dev/md0 --level=container works?
A device called /dev/md0 appears in /proc/mdstat but I am not sure how to use that device?
I have 2 blank drives with 1 500GB partition on each. I would like to setup mirroring, but not in the... (0 Replies)
Discussion started by: hytron
0 Replies
8. UNIX for Advanced & Expert Users
Hi All,
I have been trying to create a USB RAID 5 using mdadm tool on Joli OS 1.2 (Ubuntu) but with no luck. I cannot even get pass the creation of array device (/dev/md0) and superblock. I am using 3 USB keys (2 16.4 GB kingston and 1 16GB sandisk).
My steps are:
... (5 Replies)
Discussion started by: powelltallen
5 Replies
9. Filesystems, Disks and Memory
Hello,
i have a system with 6 sata3 seagate st3000dm01 disks running on stable Debian with software raid mdadm. i have md0 for root and md1 for swap and md2 for the files. i now want to add one more disk = sdh4 for md2 but i got this errors:
The new disk is connected to an 4 port sata... (7 Replies)
Discussion started by: Sunghost
7 Replies
10. UNIX for Advanced & Expert Users
Hi guys,
I'm new to RAID although I've had a server running raid5 for a while. It was delivered preinstalled like this and I never really wondered how to monitor and maintain it. This quick introduction just to let you understand why I'm such an idiot asking such a silly question.
Now what... (0 Replies)
Discussion started by: chebarbudo
0 Replies
LEARN ABOUT OPENSOLARIS
mkdevmaps
mkdevmaps(1M) System Administration Commands mkdevmaps(1M)
NAME
mkdevmaps - make device_maps entries
SYNOPSIS
/usr/sbin/mkdevmaps
DESCRIPTION
The mkdevmaps command writes to standard out a set of device_maps(4) entries describing the system's frame buffer, audio, and removable
media devices.
The mkdevmaps command is used by the init.d(4) scripts to create or update the /etc/security/device_maps file.
Entries are generated based on the device special files found in /dev. For the different categories of devices, the mkdevmaps command
checks for the following files under /dev:
audio /dev/audio, /dev/audioctl, /dev/sound/...
tape /dev/rst*, /dev/nrst*, /dev/rmt/...
floppy /dev/diskette, /dev/fd*, /dev/rdiskette, /dev/rfd*
removable disk /dev/dsk/c0t?d0s?, /dev/rdsk/c0t?d0s?
frame buffer /dev/fb
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Obsolete |
+-----------------------------+-----------------------------+
SEE ALSO
allocate(1), bsmconv(1M), attributes(5)
NOTES
mkdevmaps might not be supported in a future release of the Solaris operating system.
SunOS 5.11 8 Oct 2003 mkdevmaps(1M)