Having a strange problem on a x4270m2 Sun server.
Jumpstarting it from dvd drive. After install the dvddrive does not exist.
Be aware jumpstart is custommade
Code:
bash-3.00# mount -F hsfs -o ro /dev/dsk/c1t4d0p0 /cdrom
mount: No such device
mount: cannot mount /dev/dsk/c1t4d0p0
iostat reveals only the hwraid volume
Code:
bash-3.00# iostat -E
sd1 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: LSI Product: Logical Volume Revision: 3000 Serial No:
Size: 299.00GB <298999348736 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 2 Predictive Failure Analysis: 0
Booting from dvd/Cdrom is ok, so hardware works ok.
TEAC DV-W28SS-V
Could it be a driver issue ? & how do I detect that
Last edited by stockhes; 02-14-2012 at 02:00 PM..
Reason: forgot code tags
ok here is what i do and get:
# mount /dev/sd6a /cdrom
mount /dev/sd6a write-protected
ok so what do i do its a external cdrom and its on scsi number 6. its a SparcSTATION 2. we're trying to put red hat sparc 6.2 on it but it wont boot. i am about to take the hard drives out and install it a... (8 Replies)
I just built a jumpstart server on a Solaris 9 sun box and have had no problems jumpstarting other sol9 boxes using the custom rules. I've also copied a Solaris 10 image onto that same solaris 9 server and have had problems loading Solaris 10. These boxes will go directly to the manual OS install... (5 Replies)
Hi all ,
I am trying to jumpstart ( webstart) solaris 9 on E2900 ( client) using the DVD of a V440 server ( jumstart server). I did the setup for the V440 as follows :
cleaning up preexisting install client "XXXXXXX"
removing XXXXXXXfrom bootparams
removing /etc/bootparams, since it is... (14 Replies)
Hello everyone,
I tried to install solaris 10 using the command # boot net - install.
I take the image correctly but when you start installing the Operating system installation takes a long (4 hours I have left and not advancing but not send me any errors), it can be seen from the following:
... (7 Replies)
Hello,
First i'm Dutch, and my English is not very well. Sorry. :D
I have got a Sun Microsystems Ultra 3D (with SPARC processor). The file must be burned to a DVD. And my computer can onley read a cd.
How to get Solaris 10 on a few cds?
Please help me.
Thanks a lot..
Greets. (21 Replies)
Good day everyone,
I am trying to install some new senmail patch on my Solaris 10 system.
I know the cdrom for my CP3260 blade servers in my rack worked for the last patches installed. However, when I went to copy from the .tar file from the cdrom to the /tmp. I received an error cannot... (2 Replies)
I have a laptop and need to build an Oracle Linux kickstart server and a Solaris Jumpstart server that can build sparc and x86 systems.
Is the best way to create a dual boot from grub for Oracle Linux and Solaris x86?
Can the Oracle Kickstart be used as a Jumpstart to build both Solaris 10... (2 Replies)
Hello,
I am following the HPUX 11.31 install/update guide and I am trying to install "Update-UX" from the installation media. I put the CD into the drive, and I am trying to mount the device. The instructions state:Find the DVD-ROM device file name:
ioscan -C disk -f -n -k | more
A typical... (5 Replies)
I want to have a bootable DVD that will perform a jumpstart install of Solaris 10 x86 I've mainly used JumpStart DVD (with Solaris flash archive) for x86 platform as a reference, and I used the sysidcfg, profile, rules, etc. from a working jumpstart server. For the life of me, though, I cannot... (1 Reply)
Discussion started by: jnojr
1 Replies
LEARN ABOUT SUNOS
mount_pcfs
mount_pcfs(1M) System Administration Commands mount_pcfs(1M)NAME
mount_pcfs - mount pcfs file systems
SYNOPSIS
mount -F pcfs [generic_options] [-o FSType-specific_options] special | mount_point
mount -F pcfs [generic_options] [-o FSType-specific_options] special mount_point
DESCRIPTION
mount attaches an MS-DOS file system (pcfs) to the file system hierarchy at the mount_point, which is the pathname of a directory. If
mount_point has any contents prior to the mount operation, these are hidden until the file system is unmounted.
If mount is invoked with special or mount_point as the only arguments, mount will search /etc/vfstab to fill in the missing arguments,
including the FSType-specific_options; see mount(1M) for more details.
The special argument can be one of two special device file types:
o A floppy disk, such as /dev/diskette0 or /dev/diskette1.
o A DOS logical drive on a hard disk expressed as device-name:logical-drive , where device-name specifies the special block device-file
for the whole disk and logical-drive is either a drive letter (c through z) or a drive number (1 through 24). Examples are
/dev/dsk/c0t0d0p0:c and /dev/dsk/c0t0d0p0:1.
The special device file type must have a formatted MS-DOS file system with either a 12-bit, 16-bit, or 32-bit File Allocation Table.
OPTIONS
generic_options
See mount(1M) for the list of supported options.
-o
Specify pcfs file system specific options. The following options are supported:
foldcase|nofoldcase
Force uppercase characters in filenames to lowercase when reading them from the filesystem. This is for compatibility with the pre-
vious behavior of pcfs. The default is nofoldcase.
FILES
/etc/mnttab table of mounted file systems
/etc/vfstab list of default parameters for each file system
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWesu |
+-----------------------------+-----------------------------+
SEE ALSO mount(1M), mountall(1M), mount(2), mnttab(4), vfstab(4), attributes(5), pcfs(7FS)NOTES
If the directory on which a file system is to be mounted is a symbolic link, the file system is mounted on the directory to which the sym-
bolic link refers, rather than on top of the symbolic link itself.
SunOS 5.10 24 Nov 2003 mount_pcfs(1M)
02-13-2012
