Hi all,
this time I'd need a help from an advanced Solaris system admin
I attached a HP StorageWorks Ultrium 215 Tape Drives - Overview - c00059530 - HP Business Support Center to my Sun E220R and it got recognized immediately (probe-scsi-all).
Now the operating system boot process finished, I logged in with root and in dmesg I can see the drive:
Here are the questions:
How can I read the tape content?
How can I eject it with a shell command?
Can I load an already ejected tape?
Do I neccessarily need a proper/commercial Backup Software?
Can't I simply do the backup using dd command?
How would I do a full backup of the main harddisk sd0 ?
How would I do a full restore of the main harddisk sd0 ?
---------- Post updated at 18:41 ---------- Previous update was at 18:40 ----------
Thank you in advance for your attempt to help me! :-)
---------- Post updated at 18:44 ---------- Previous update was at 18:41 ----------
Please also note this is 100% my personal hobbyist problem!
It's definately not a real-world problem and of course this is not a homework or something.
I'm running SCO OS 505 on a Compaq proliant 1600, and my tape drive will just not work. It was working properly and whent to Sh?ts when I tried to get the cd rom working. I have uninstalled any configured tape drive and rebooted and then configured a tape drive and rebooted still nothing. I'm... (4 Replies)
I'm researching a tape drive + backup software to work across my unix/linux network. Was thinking about a dds4 tape drive (sony's) on my solaris ultra2, with some kind of software that would work across the network to back up my other 2 solaris boxes, plus my 2 linux boxes. What do others use... (3 Replies)
Hi all, please help I am stuck.
I have installed a external unipack scsi tape drive. The tape drive is Exabyte Eliant 820. All I did was connected scsi cable and power it on. When issued "probe-scsi-all" command, the tape is correctly identified. However, when issued "dmesg | more" command, the... (4 Replies)
hi-
I just installed a quad gigaswift ethernet scsi card to my sunblade 150. I checked with the docs, and got all of the required drivers on the box. Now, I'm trying to mount an external scsi tape drive with no luck. I set the scsi address on the external drive to 0. Here's what I'm coming... (9 Replies)
Currenty running SCO Openserver 6 at a Dell PowerEdge T300. I recently installed a driver for an Adaptec SCSI card (adpu320). When I connect a tape drive to it and re-start the system,it freezes and displays the following message: "WARNING: adpu320: Command timed out (ha= 4)" and the system... (2 Replies)
I have 2 servers in my office which are p570 and p550. Both run under AIX 5300-07. And I only have 1 x SCSI Ultrium LTO3 Tape Drive. For syncronization purposes, I always backup p570 server's database and restore into p550 server.
And due to the frequent process of syncronization, I require to... (1 Reply)
I've had a scsi hard drive, scsi tape drive, and cd rom working off an adaptec 29160 controller. Everything worked great until a few days ago. I begin getting tar format errors (running sco 5.0.6) on the tape drive and occasionally the entire system would hang up while trying to access data on... (0 Replies)
i connect an ibm ultrium lto 5 (sas) to an 8204-e8a (v6.1 TL5 SP 1)
then i do an cfgmgr and get message about missing filesets
devices.pciex.1410ca03
devices.pciex.pciexclass.00107
devices.pciex.00107200
devices.pciex.pciex100.72.3
and a few others
i try to find the filesets on the two OS... (1 Reply)
Discussion started by: AIXBlueCat
1 Replies
LEARN ABOUT HPUX
backup_listhosts
BACKUP_LISTHOSTS(8) AFS Command Reference BACKUP_LISTHOSTS(8)NAME
backup_listhosts - Lists Tape Coordinators registered in the Backup Database
SYNOPSIS
backup listhosts [-localauth] [-cell <cell name>] [-help]
backup listh [-l] [-c <cell name>] [-h]
DESCRIPTION
The backup listhosts command displays the Backup Database record of the port offset numbers defined for Tape Coordinator machines. A Tape
Coordinator must have an entry in the list to be available for backup operations.
The existence of an entry does not necessarily indicate that the Tape Coordinator process (butc) is currently running at that port offset.
To check, issue the backup status command.
OPTIONS -localauth
Constructs a server ticket using a key from the local /etc/openafs/server/KeyFile file. The backup command interpreter presents it to
the Backup Server, Volume Server and VL Server during mutual authentication. Do not combine this flag with the -cell argument. For more
details, see backup(8).
-cell <cell name>
Names the cell in which to run the command. Do not combine this argument with the -localauth flag. For more details, see backup(8).
-help
Prints the online help for this command. All other valid options are ignored.
OUTPUT
After a "Tape hosts:" header, the output reports two things about each Tape Coordinator currently defined in the Backup Database:
o The hostname of the machine housing the Tape Coordinator. The format of this name depends on the hostname format used when the backup
addhost command was issued.
o The Tape Coordinator's port offset number.
The Tape Coordinators appear in the order in which they were added to the Backup Database.
EXAMPLES
The following example shows the result of the command in the ABC Corporation cell:
% backup listhosts
Tape hosts:
Host backup1.abc.com, port offset 0
Host backup1.abc.com, port offset 1
Host backup3.abc.com, port offset 4
Host backup2.abc.com, port offset 3
PRIVILEGE REQUIRED
The issuer must be listed in the /etc/openafs/server/UserList file on every machine where the Backup Server is running, or must be logged
onto a server machine as the local superuser "root" if the -localauth flag is included.
SEE ALSO backup(8), backup_addhost(8), backup_delhost(8), backup_status(8)COPYRIGHT
IBM Corporation 2000. <http://www.ibm.com/> All Rights Reserved.
This documentation is covered by the IBM Public License Version 1.0. It was converted from HTML to POD by software written by Chas
Williams and Russ Allbery, based on work by Alf Wachsmann and Elizabeth Cassell.
OpenAFS 2012-03-26 BACKUP_LISTHOSTS(8)