Hi all,
this time I'd need a help from an advanced Solaris system admin
I attached a HP StorageWorks Ultrium 215 Tape Drives - Overview - c00059530 - HP Business Support Center to my Sun E220R and it got recognized immediately (probe-scsi-all).
Now the operating system boot process finished, I logged in with root and in dmesg I can see the drive:
Here are the questions:
How can I read the tape content?
How can I eject it with a shell command?
Can I load an already ejected tape?
Do I neccessarily need a proper/commercial Backup Software?
Can't I simply do the backup using dd command?
How would I do a full backup of the main harddisk sd0 ?
How would I do a full restore of the main harddisk sd0 ?
---------- Post updated at 18:41 ---------- Previous update was at 18:40 ----------
Thank you in advance for your attempt to help me! :-)
---------- Post updated at 18:44 ---------- Previous update was at 18:41 ----------
Please also note this is 100% my personal hobbyist problem!
It's definately not a real-world problem and of course this is not a homework or something.
I'm running SCO OS 505 on a Compaq proliant 1600, and my tape drive will just not work. It was working properly and whent to Sh?ts when I tried to get the cd rom working. I have uninstalled any configured tape drive and rebooted and then configured a tape drive and rebooted still nothing. I'm... (4 Replies)
I'm researching a tape drive + backup software to work across my unix/linux network. Was thinking about a dds4 tape drive (sony's) on my solaris ultra2, with some kind of software that would work across the network to back up my other 2 solaris boxes, plus my 2 linux boxes. What do others use... (3 Replies)
Hi all, please help I am stuck.
I have installed a external unipack scsi tape drive. The tape drive is Exabyte Eliant 820. All I did was connected scsi cable and power it on. When issued "probe-scsi-all" command, the tape is correctly identified. However, when issued "dmesg | more" command, the... (4 Replies)
hi-
I just installed a quad gigaswift ethernet scsi card to my sunblade 150. I checked with the docs, and got all of the required drivers on the box. Now, I'm trying to mount an external scsi tape drive with no luck. I set the scsi address on the external drive to 0. Here's what I'm coming... (9 Replies)
Currenty running SCO Openserver 6 at a Dell PowerEdge T300. I recently installed a driver for an Adaptec SCSI card (adpu320). When I connect a tape drive to it and re-start the system,it freezes and displays the following message: "WARNING: adpu320: Command timed out (ha= 4)" and the system... (2 Replies)
I have 2 servers in my office which are p570 and p550. Both run under AIX 5300-07. And I only have 1 x SCSI Ultrium LTO3 Tape Drive. For syncronization purposes, I always backup p570 server's database and restore into p550 server.
And due to the frequent process of syncronization, I require to... (1 Reply)
I've had a scsi hard drive, scsi tape drive, and cd rom working off an adaptec 29160 controller. Everything worked great until a few days ago. I begin getting tar format errors (running sco 5.0.6) on the tape drive and occasionally the entire system would hang up while trying to access data on... (0 Replies)
i connect an ibm ultrium lto 5 (sas) to an 8204-e8a (v6.1 TL5 SP 1)
then i do an cfgmgr and get message about missing filesets
devices.pciex.1410ca03
devices.pciex.pciexclass.00107
devices.pciex.00107200
devices.pciex.pciex100.72.3
and a few others
i try to find the filesets on the two OS... (1 Reply)
Discussion started by: AIXBlueCat
1 Replies
LEARN ABOUT CENTOS
scsieject
scsieject(1) General Commands Manual scsieject(1)NAME
scsieject - control SCSI tape devices
SYNOPSIS
scsieject [-f <scsi-generic-device>] commands
DESCRIPTION
The scsieject command controls SCSI devices in a platform-independent manner. As long as 'mtx' works on the platform, so does 'scsieject'.
OPTIONS
The first argument, given following -f , is the SCSI generic device corresponding to your tape drive. Consult your operating system's doc-
umentation for more information (for example, under Linux these are generally /dev/sg0 through /dev/sg15, under FreeBSD these are
/dev/pass0 through /dev/passX. Under Solaris this is usually the same as your tape drive (Solaris has a SCSI passthrough ioctl). You can
set the STAPE or TAPE environment variable rather than use -f.
COMMANDS
load Load the medium into the drive. When this command is issued to a CD/DVD drive and the tray is extended the tray will be
retracted if the drive is capable of it.
unload Unload the medium from the drive (also known as eject). When this command is issued to a CD/DVD drive or a tape drive the media
will be ejected if the device supports it.
start Start the device. Some devices require a start command after a media changer has loaded new media into the device.
stop Stop the device. Some devices require a stop command prior to unloading the medium from the device when using a media changer.
lock Lock the device. Locks the device so that the medium cannot be removed manually.
unlock Unlock the device. Unlocks the device so that the medium can be removed manually.
AUTHORS
This program was written by Robert Nelson <robertnelson@users.sourceforge.net> based on the scsitape program written by Eric Lee Green
<eric@badtux.org>. Major portions of the 'mtxl.c' library used herein were written by Leonard Zubkoff.
HINTS
Under Linux, cat /proc/scsi/scsi will tell you what SCSI devices you have. You can then refer to them as /dev/sga, /dev/sgb, etc. by the
order they are reported.
Under FreeBSD, camcontrol devlist will tell you what SCSI devices you have, along with which pass device controls them.
Under Solaris 7 and 8, /usr/sbin/devfsadm -C will clean up your /devices directory. Then find /devices -name 'st@*' -print will return a
list of all tape drives. /dev on Solaris is apparently only of historical interest.
BUGS AND LIMITATIONS
There are no known bugs or limitations.
AVAILABILITY
This version of scsieject is currently being maintained by Robert Nelson <robertnelson@users.sourceforge.net> as part of the 'mtx' suite of
programs. The 'mtx' home page is http://mtx.sourceforge.net and the actual code is currently available there and via SVN from
http://sourceforge.net/projects/mtx.
SEE ALSO loaderinfo(1),tapeinfo(1),mtx(1)
scsieject1.0 scsieject(1)