02-05-2012
There's no reason you should need to use parted when you used fdisk instead. I/O errors are never supposed to happen. The problems may be unrelated.
8 More Discussions You Might Find Interesting
1. Solaris
Hi All,
Any idea why i'm having this warning during boot:
WARNING: /pci@1f,0/pci@1,1/ide@3/dad@1,0 (dad1):
corrupt label - wrong magic number
This happens after I added another ide HD and reinstall it from solaris 10 to solaris 8.
Thanks in advance. (7 Replies)
Discussion started by: itik
7 Replies
2. Solaris
Hi,
I have a Sun X4200, when I try to reboot the machine it's not detecting the drive and it shows the following error when I try to rebuilt it. I am not sure whether its a bad HD or something else.
Label says 983040 blocks: Drive says 983039 blocks
WARNING:... (1 Reply)
Discussion started by: gunnervarma
1 Replies
3. Solaris
Hi all,
currently , my root filesystem already reach 90 ++%
I already add more cylinder in the root partition as below
Part Tag Flag Cylinders Size Blocks
0 root wm 67 - 5086 38.46GB (5020/0/0) 80646300
1 swap wu 1 - ... (11 Replies)
Discussion started by: SmartAntz
11 Replies
4. UNIX for Advanced & Expert Users
Can someone please help me out here.
I have SunSolaris server that has a ridiculous about of space on it. several hundred gigabytes of space. There are lots of partitions on this server that has at least 100Gs on them.
I want to mount just one of these partitions on my Linux server so I can... (4 Replies)
Discussion started by: SkySmart
4 Replies
5. Solaris
I have created 1 LUN.
1)LUN 00BB 200GB /dev/rdsk/c1t3d44
/dev/rdsk/c2t28d44
/dev/rdsk/c3t19d44
/dev/rdsk/c4t12d44
2) Already added the new entry into sd.conf and rebooted.
3) Already done these:
powercf –q
power config
4) power display dev=all
I can see the new Symmetrix device.... (1 Reply)
Discussion started by: sirius20d
1 Replies
6. Filesystems, Disks and Memory
I've seen several posts that are similar to what I'm trying to do but no dice. I have a server (SunFire V215) that went belly up. I've set up a new one. I'm getting a corrupt label: wrong magic number error. Everything I'm seeing says label the drives, but if I do I'm afraid I'll lose the data... (0 Replies)
Discussion started by: tnelson
0 Replies
7. Solaris
Hello everyone,
I am trying to mount an ext4 filesystem which I created from Ubuntu. But mount command fails saying:
prakhar@Solaris:~$ sudo mount /dev/dsk/c10t0d0p1 /mnt
Password:
mount: /dev/dsk/c10t0d0p1 is not this fstype
And I also tried this:
prakhar@Solaris:~$ fstyp... (6 Replies)
Discussion started by: Prakhar Mishra
6 Replies
8. Red Hat
(Don't you hate being on holiday and being the only IT person in the family?)
Got a wonderful thanksgiving surprise .. dead windows-8 laptop with "important" unbacked-up data. No worries, I have my my fedora labtop and a magical SATA to USB converter. Plugged in the drive, and ... can't mount... (4 Replies)
Discussion started by: derekludwig
4 Replies
LEARN ABOUT OPENSOLARIS
mega_sas
mega_sas(7D) Devices mega_sas(7D)
NAME
mega_sas - SCSI HBA driver for LSI MegaRAID SAS controller
DESCRIPTION
The mega_sas MegaRAID controller host bus adapter driver is a SCSA-compliant nexus driver that supports the Dell PERC 5/E, 5/i, 6/E and
6/i RAID controllers, the IBM ServeRAID-MR10k SAS/SATA controller and the LSI MegaRAID SAS/SATA 8308ELP, 8344ELP, 84016E, 8408ELP,
8480ELP, 8704ELP, 8704EM2, 8708ELP, 8708EM2, 8880EM2 and 8888ELP series of controllers.
Supported RAID features include RAID levels 0, 1, 5, and 6, RAID spans 10, 50 and 60, online capacity expansion (OCE), online RAID level
migration (RLM), auto resume after loss of system power during arrays, array rebuild or reconstruction (RLM) and configurable stripe size
up to 1MB. Additional supported RAID features include check consistency for background data integrity, patrol read for media scanning and
repairing, 64 logical drive support, up to 64TB LUN support, automatic rebuild and global and dedicated hot spare support.
CONFIGURATION
The mega_sas.conf file contains no user configurable parameters. Please configure your hardware through the related BIOS utility or the
MegaCli configuration utility. If you want to install to a drive attached to a mega_sas HBA, you should create the virtual drive first
from the BIOS before running the Solaris install. You can obtain the MegaCli utility from the LSI website.
The mega_sas device can support up to 64 virtual disks. Note that BIOS numbers the virtual disks as 1 through 64, however in the Solaris
operating environment virtual disks are numbered from 0 to 63. Also note that SAS and SATA drives cannot be configured into the same vir-
tual disk.
KNOWN PROBLEMS AND LIMITATIONS
The mega_sas driver does not support the LSI MegaRAID SAS 8204ELP, 8204XLP, 8208ELP, and 8208XLP controllers.
FILES
/kernel/drv/mega_sas 32-bit ELF kernel module. (x86)
/kernel/drv/amd64/mega_sas 64-bit kernel module. (x86)
/kernel/drv/mega_sas.conf Driver configuration file (contains no user-configurable options).
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |x86-based systems |
+-----------------------------+-----------------------------+
|Availability |SUNWmegasas |
+-----------------------------+-----------------------------+
|Interface stability |Uncommitted |
+-----------------------------+-----------------------------+
SEE ALSO
prtconf(1M), attributes(5), sata(7D), scsi_hba_attach_setup(9F), scsi_sync_pkt(9F), scsi_transport(9F), scsi_inquiry(9S), scsi_device(9S),
scsi_pkt(9S)
Small Computer System Interface-2 (SCSI-2)
SunOS 5.11 14 Aug 2008 mega_sas(7D)