I was trying to test run a /bin/bash script i had just written when my monitor suddenly went blank.I had to shut down the machine from the systems main power. I was unable to boot afterwards and soo i went for the interactive boot process by typing boot -a.
I succeded in the first stage of the... (1 Reply)
I have a Sun box that I am trying to get started up, but everytime it will crap out because it is bound to an NIS domain that no longer exists. The Master for that domain was put out of commission. It was suggested to me that I could boot off of the Installation cd for the OS (Solaris 8) and... (4 Replies)
Hello
I have Sun Ultra 10 with Solaris 7 installed on it.
Sometimes back
after that the machine use to get hang .Even after
rebooting the system was not booting.
I have manually switch on /off many times from the
power board itself .Once in a while it
use to boot .After... (12 Replies)
Got the console cable all connected up and got tot he ok prompt.
Typed in boot cdrom and got the following:
ok boot cdrom
Boot device: /pci@8,700000/scsi@6/disk@6,0:f File and args:
ERROR: /packages/deblocker: Last Trap: Corrected ECC Error
Can't read disk label.
Can't open disk... (4 Replies)
I have bought from eBay a second hand Sun Fire V210 server and I'm really stumped at the lack of complete instructions on how to connect to it.
I don't have a Windows machine, I've only got Ubuntu and OS X computers. None of them have an old RS-232 port on them either.
In saying that, I have... (12 Replies)
Hello
I have an old sun fire v250 server that I am trying to revive.
I am trying to boot it from cdrom to install the OS (Solaris 10). The original data in the disk is corrupt and I am trying to do a new clean install. However I encounter the following errors.
Does it look like the disk itself... (1 Reply)
Purchased a Sun Surefire V210 Server off eBay. Unable to Access the Terminal Mode via the Terminal MGT. Using Windows 7 home, and downloaded the ConEmu.
The ConEmu brings up a Command line on the PC, and that's it.
Being new to all this, I was expecting a Login prompt to pop up. Read the... (22 Replies)
Hey,
I have a V210 with a failed CPU fan.
The temperature is currently at 84C and I've been asked to wait a few weeks before replacing as its a production system and it cant be shut down yet.
Is it too hot? Do I risk killing the CPU at this temp?
Its been like this for a few weeks now... (5 Replies)
Hi,
First post here!
I have a Sun V210 that I use occasionally for build testing things big-endian. I switched it on the other day, at it aint comin' up. I was wondering if anyone on this fine forum knows if it can be brought back from the dead.
With the SCC card in, and conencted to... (22 Replies)
Discussion started by: vext01
22 Replies
LEARN ABOUT SUNOS
sckmd
sckmd(1M) System Administration Commands sckmd(1M)NAME
sckmd - Sun Fire High-End system key management daemon
SYNOPSIS
/usr/platform/SUNW,Sun-Fire-15000/lib/sckmd
DESCRIPTION
sckmd is a server process that resides on a Sun Fire high-end system domain. sckmd maintains the Internet Protocol Security (IPsec) Secu-
rity Associations (SAs) needed to secure the communication between the Sun Fire 15K System Controller (SC) and the cvcd(1M) and dcs(1M)
daemons running on a Sun Fire 15K domain. See ipsec(7P) for a description of Security Associations.
sckmd receives SAs from the SC and provides these SAs to the Security Association Databases (SADBs) using pf_key(7P).
sckmd normally starts up at system boot time. Each domain supports only one running sckmd process at a time.
FILES
/etc/inet/ipsecinit.conf Configuration file for default system-wide IPsec policies
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+------------------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+------------------------------------+
|Architecture |Sun Fire High-End systems |
+-----------------------------+------------------------------------+
|Availability |SUNWsckmx.u, SUNWsckmu.u, SUNWsckmr |
+-----------------------------+------------------------------------+
SEE ALSO cvcd(1M), dcs(1M), ipsecconf(1M), ipsecalgs(1M), attributes(5), ipsec(7P), ipsecah(7P), ipsecesp(7P), pf_key(7P)
Sun Enterprise 10000 SSP Reference Manual
System Management Services (SMS) Reference Manual
NOTES
IPsec is used by Sun Fire high-end systems such as a Sun Fire 15K, to secure the communication between the SC, and the cvcd(1M) and dcs(1M)
daemons running on a domain. System-wide IPsec policies for these daemons are configured on a domain with ipsecconf(1M). Default policies
are defined when the SUNWsckmr package is installed on a Sun Fire high-end system domain at OS install time.
Package SUNWsckmr configures default system-wide policies for cvcd(1M) and dcs(1M) by adding the following entries in
/etc/inet/ipsecinit.conf:
{ dport sun-dr ulp tcp } permit
{ auth_alg md5 }
{ sport sun-dr ulp tcp } apply
{ auth_alg md5 sa unique }
{ dport cvc_hostd ulp tcp } permit
{ auth_alg md5 }
{ sport cvc_hostd ulp tcp } apply
{ auth_alg md5 sa unique }
The cvc_hostd service represents cvcd(1M) and the sun-dr service represents dcs(1M) in the preceding entries.
These policies conform to the format defined by ipsec(7P) and require and require IPsec AH protection using the HMAC-MD5 algorithm. See
ipsecah(7P).
System-wide policies for cvcd(1M) and dcs(1M) configured on a domain using ipsecconf(1M) must match the IPsec policies defined for these
services on the SC. On an SC, IPsec policies for these services are defined by the SMS key management daemon. Refer to thekmd(1M) man page
in the System Management Services (SMS) Reference Manual.
IPsec encryption or authentication with encryption can be enabled on the domain using the encr_algs and encr_auth_algs properties, as
described in the ipsecconf(1M) manual page. For example, the following ipsecconf(1M) entries require IPsec ESP protection using the Triple-
DES encryption algorithm and the HMAC-MD5 authentication algorithm.
{ dport cvc_hostd ulp tcp } permit
{ encr_algs 3des encr_auth_algs md5 }
{ sport cvc_hostd ulp tcp } apply
{ encr_algs 3des encr_auth_algs md5 sa unique }
See ipsecesp(7P) for more information on the IPsec ESP protocol. You can obtain a list of authentication and encryption algorithms and
their properties by using the ipsecalgs(1M) command.
SunOS 5.10 23 Oct 2003 sckmd(1M)