I have done some tests with UFS/ZFS under bonnie benchmark.
here are the results if you are interested.
software:
OS: FreeBSD 7-CURRENT 200708 snapshot
benchmark: bonnie -s 2048
CFLAGS: -O2 -fno-strict-aliasing -pipe -s
CPUTYPE: athlon-mp
scheduler: ULE
hardware:
CPU: (single) Athlon... (0 Replies)
I have some UFS volumes (non root), that I would like to change into ZFS volumes.
Is this possible ?
I think the only method is to create a new zfs volume and copy the data accoss, this would take a long time for us. Is there a quicker way ?
Regards (5 Replies)
Hello, I am new to Solaris so i apologize upfront if my questions seem trivial.
I am trying to install a ZFS file system on a Solaris 10 machine with UFS already installed on it.
I want to run: # zpool create pool_zfs c0t0d0
then: # zfs create pool_zfs/fs
My question is more to... (3 Replies)
Hi,
Im currently having my diskspace allocation of my UFS filesystem in solris as 100% for /usr
directory.I have created a zfs pool of 3 gb.I want to allocate space from my zfs pool to /usr so that i can free space in /usr.Please help me it is quiet urgent. (6 Replies)
Hello All,
Good Morning, We are trying to convert the UFS root in to ZFS. Am getting below error. Any one help me out on this ?
bash-3.00# zpool list
NAME SIZE USED AVAIL CAP HEALTH ALTROOT
guru 5.95G 483M 5.48G 7% ONLINE -
bash-3.00# zpool create rpool c2t10d0p0... (4 Replies)
I have installed Solaris 11 Express on my machine. I have made a script which would take snapshots of all the rpool filesystems every day and send them to a (local) hard drive. There is a zpool on that drive called backup.
Now in case of a system failure, I will act according to a manual on the... (1 Reply)
Hi All
After downloading ZFS documentation from oracle site, I am able to successfully migrate UFS root FS without zones to ZFS root FS. But in case of UFS root file system with zones , I am successfully able to migrate global zone to zfs root file system but zone are still in UFS root file... (2 Replies)
Discussion started by: sb200
2 Replies
LEARN ABOUT FREEBSD
zfsboot
ZFSBOOT(8) BSD System Manager's Manual ZFSBOOT(8)NAME
zfsboot -- bootcode for ZFS on BIOS-based computers
DESCRIPTION
zfsboot is used on BIOS-based computers to boot from a filesystem in a ZFS pool. zfsboot is installed in two parts on a disk or a partition
used by a ZFS pool. The first part, a single-sector starter boot block, is installed at the beginning of the disk or partition. The second
part, a main boot block, is installed at a special offset within the disk or partition. Both areas are reserved by the ZFS on-disk specifi-
cation for boot use. If zfsboot is installed in a partition, then that partition should be made bootable using appropriate configuration and
boot blocks described in boot(8).
BOOTING
The zfsboot boot process is very similar to that of gptzfsboot(8). One significant difference is that zfsboot does not currently support the
GPT partitioning scheme. Thus only whole disks and MBR partitions, traditionally referred to as slices, are probed for ZFS disk labels. See
the BUGS section in gptzfsboot(8) for some limitations of the MBR scheme support.
USAGE
zfsboot supports all the same prompt and configuration file arguments as gptzfsboot(8).
FILES
/boot/zfsboot boot code binary
/boot.config parameters for the boot block (optional)
/boot/config alternative parameters for the boot block (optional)
EXAMPLES
zfsboot is typically installed using dd(1). To install zfsboot on the ada0 drive:
dd if=/boot/zfsboot of=/dev/ada0 count=1
dd if=/boot/zfsboot of=/dev/ada0 iseek=1 oseek=1024
If the drive is currently in use, the GEOM safety will prevent writes and must be disabled before running the above commands:
sysctl kern.geom.debugflags=0x10
zfsboot can also be installed in an MBR slice:
gpart create -s mbr ada0
gpart add -t freebsd ada0
gpart create -s BSD ada0s1
gpart bootcode -b /boot/boot0 ada0
gpart set -a active -i 1 ada0
dd if=/boot/zfsboot of=/dev/ada0s1 count=1
dd if=/boot/zfsboot of=/dev/ada0s1 iseek=1 oseek=1024
Note that commands to create and populate a pool are not shown in the example above.
SEE ALSO dd(1), boot.config(5), boot(8), gptzfsboot(8), loader(8), zfsloader(8), zpool(8)HISTORY
zfsboot appeared in FreeBSD 7.3.
AUTHORS
This manual page was written by Andriy Gapon <avg@FreeBSD.org>.
BUGS
Installing zfsboot with dd(1) is a hack. ZFS needs a command to properly install zfsboot onto a ZFS-controlled disk or partition.
BSD September 15, 2014 BSD