You have to get your HMC involved because the vio server and your client LPAR can only see their own slot numbers for their adapters. I don't think either can see the other server's slot number, maybe they can but I'm not sure how.
Here is how it can be done though. In this example, slot 11 on the VIO server connects to slot C9 on the client.
Get the slot number of the vscsi0 from the client side using "lsslot -c slot":
Assuming your managed system's name is "MANAGEDSYSTEM", query your HMC with the 'lshwres' command and grep out your client LPAR's hostname and slot number. From this command you'll see the client slot to VIO slot association (make sure to put the comma inside the double-quotes of the grep):
You can verify the resulting VIO slot number information by looking at the 'lsmap -all' output on your VIO server:
We're using VIO (not an HMC) to manage our LPAR's We have 3 physical adapters and 4 LPARs. Through the VIO interface we assigned 2 virtual interfaces but require a 3rd interface assigned to these LPARs. I am experiencing issues understanding exactly how to create another virtual adapter, either... (1 Reply)
Hi,
I am little confused about the virtual Ethernet configuration on VIO and Client Partitions. There is alot of info on the internet but it gets more confusing....
If I have LHEA, it is very simple. Just assign LHEA (logical host ethernet adapter) to client partition -> run smitty tcpip and... (10 Replies)
Hi,
I want to know wheather partition size for installation of vio client can be specified on vio server
example
If I am installing vio server on blade with 2*300gb hard disk,after that I want to create 2 vio client (AIX Operating system) wheather I can specify hard disk size while... (1 Reply)
Hi,
I would like to reboot vio client but I am not able to access vio client(I am not able to get putty) , I am able to get putty of vio server,
is there any command by using which from vio server I can reboot vio client? (3 Replies)
Hi,
I am having single p series blade with Single Physcial CPU with dual core,
on that vio server is installed, I have created vio client allocate 0.9 each cpu , now when I am running prtconf command on vio client it is showing "2" no of processor,
My query using which command it will... (1 Reply)
Hi
I am facing very strange issue on my vio server 5 vio clients are confgured, now I am to connect 3 vio client , i am unable to connect 2 vio client my ip address,subnet mask,gateway is correct.
i have rebooted and reconfigured the ip address, but issue is persists.
Kindly suggest how to... (0 Replies)
Hi
im logged in to the vio servers now.
when i give
# lspv | wc -l
i get the count as 6246
how will i know if a lun has been already mapped to a vio client or it is left free without mapping to any of the vio client ? (1 Reply)
Hi
In my vio server I have the below output
$ lsvopt | grep -i SAPSITGS
sapsitgs_cdrom TL12UP.iso 3182
In my vio client lpar I have the below output
root@sapsitgs:/ # lsdev -Cc cdromcd0 Available Virtual SCSI Optical Served by VIO Server
cd1... (1 Reply)
I know the VIOs are generally to be treated as an appliance and one should never drop down to oem_setup_env. In reality however, oem is a very useful tool to get the job done. So that leads me into the question of using the Chef client on a VIO.
Currently a big push to manage all our *nix... (4 Replies)
I have a broken PV in a VIO VG that's used to support client LPARs using LVs. On the client LPAR, I reduced all PVs from the relevant client VG and thus deleted it. I.e. there is no client LPAR using the VIO VG. Yet when I try to reducevg the VIO VG, it complains that the LV hosted on the PV is... (2 Replies)
Discussion started by: maraixadm
2 Replies
LEARN ABOUT CENTOS
amtape
AMTAPE(8) System Administration Commands AMTAPE(8)NAME
amtape - Control Amanda changers
SYNOPSIS
amtape [-o configoption...] config subcommand [subcommand_options...]
DESCRIPTION
Amtape is the command-line interface to Amanda's tape changers (amanda-changers(7)) and to the taperscan algorithm (amanda-taperscan(7)).
Tape changers maintain a notion of the current slot for each configuration. This may or may not correspond to an actual physical state of
the device, but is used by some taperscan algorithms to minimize searching through the slots.
Amtape uses the default changer. To use a different changer, use the config override option, e.g., -otpchanger=otherchanger.
SUBCOMMANDS
label label
Search for and load the Amanda tape with label [label], also setting the current slot.
slot slot
Load the volume in the given slot, also setting the current slot. The slot names current, next, first, and last have special meaning.
current
Shorthand for slot current.
inventory
Show the contents of all slots, based on the changer's cached metadata. This is a quick operation as it does not load or unload any
volumes, but is not supported by all changers.
show [slots]
Show the contents of all slots (or listed slots) by loading each slot and reading its label. This can be very slow. The slots arguments
is of the form 1,3-5,7.
reset
Reset the changer to a known state. This subcommand is intended to clear any unknown and potentially incorrect state the changer may
have stored.
eject [drive]
Eject the tape currently in the drive. This only applies to some changers. Specify a drive (by drive number) if more than one drive is
available.
clean [drive]
If a cleaning tape is defined for the changer, used it to clean the specified drive. The [drive] is optional if the changer only has
one drive.
taper
Run the taperscan algorithm (see amanda-taperscan(7)), displaying information about the progress of the scan.
update [what]
Update changer state. Consult amanda-changers(7) for changer-specific details on the format of what.
-o configoption
See the "CONFIGURATION OVERRIDE" section in amanda(8).
SEE ALSO amanda(8), amanda-changers(7), amanda-taperscan(7), amanda-devices(7)
The Amanda Wiki: : http://wiki.zmanda.com/
AUTHORS
Dustin J. Mitchell <dustin@zmanda.com>
Zmanda, Inc. (http://www.zmanda.com)
James da Silva <jds@amanda.org>
Stefan G. Weichinger <sgw@amanda.org>
Amanda 3.3.3 01/10/2013 AMTAPE(8)