01-18-2012
NIC will not work, but it did work.
I have a client machine that was built and loaded with SCO UNIX 2.1.3, (yes it is old). The machine worked fine on the closed network that I tested on in my shop. I then had to change it to the network that it would be connected to. Below is the host file, router and subnet mask file that I usually change to make it work.
----------------------------------------------------------------------------------
clt1
IP addresses for all four machines, found in the /etc/hosts
127.0.0.1 localhost
10.78.4.71 srv1
10.75.13.75 srv2
10.75.13.76 clt1
10.96.14.100 clt2
Router location is found at /etc/inet/config line 4c.
4c:/usr/sbin/route::y::add default 10.75.13.65 1
Subnet mask is found in /etc/confnet.d/inet/interface, 2nd to last line of the file.
lo:0:localhost:/dev/loop::add_loop:
TCM5X9:0::/dev/TCM5X9_0:netmask 255.255.255.192 -trailers::
ee16:0::/dev/ee16_0:-trailers::
-------------------------------------------------------------------------------------------------
When I run netstat -rn I should see something like this:
Routing tables Destination Gateway Flags Refcnt Use Interface 10.120.10.78 10.120.10.78 UH 0 0 lo0 default 10.120.10.1 UG 3 4549 TCM5X90 10.120.10 10.120.10.78 U 1 822 TCM5X90 # ifconfig -a TCM5X90: flags=23<UP,BROADCAST,NOTRAILERS> mtu 1500 inet 10.120.10.78 netmask ffffff00 broadcast 10.120.10.255 lo0: flags=49<UP,LOOPBACK,RUNNING> mtu 2048 inet 10.120.10.78 netmask ff000000
But when I run it it only come back with the local host, 127.0.0.1. When you run ping it says "Network Unreachable". The NIC does or did work here before shipping, but I had to test on a closed network.
I must be missing something that needs to be changed.
Thanks for the help,
NC user
9 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
can someone tell me the meaning of this commnad,
If you want to see a grand total of CPU time for a program when it finishes running, you can use the time command. At the Unix prompt, enter:
time java myprog
Replace myprog with the name of the program you are running. The following is an... (1 Reply)
Discussion started by: ldpathak
1 Replies
2. UNIX for Dummies Questions & Answers
Howdie everyone...
I have a shell script RemoveFiles.sh
Inside this file, it only has two commands as below:
rm -f ../../reportToday/temp/*
rm -f ../../report/*
My problem is that when i execute this script, nothing happened. Files remained unremoved. I don't see any error message as it... (2 Replies)
Discussion started by: cheongww
2 Replies
3. UNIX for Dummies Questions & Answers
whoami | grep < $1 | echo $1
trying to write a script that finds out who the user is and then takes occurences of that username from a file that is passed as an argument and then displays it (6 Replies)
Discussion started by: iago
6 Replies
4. Linux
Can anyone explain how Graphic LCD (CSTN / STN) work in Unix...
From Graphic file thro driver code to display....?
Thanks (1 Reply)
Discussion started by: nat123
1 Replies
5. Linux
********nothing too see here!!!****** (2 Replies)
Discussion started by: TonyChapman
2 Replies
6. Shell Programming and Scripting
Hi falks,
I need to dispaly a list of only directories .
As it written in the manual ,the command to do it is 'ls -d'.
When i issue 'ls -d' i'm getting:
tornado.orca.ent:DB10g :/home/oracle/Create_Database > ls -d
.
Is anyone have any idea why id does not display directories ,or maybe... (11 Replies)
Discussion started by: nir_s
11 Replies
7. Shell Programming and Scripting
My script work on Linux but not work in sun os.
my script.
logFiles="sentLog1.log sentLog2.log"
intial_time="0 0"
logLocation="/usr/local/tomcat/logs/"
sleepTime=600
failMessage=":: $(tput bold)Log not update$(tput rmso) = "
successMessage="OK"
arr=($logFiles)... (7 Replies)
Discussion started by: ooilinlove
7 Replies
8. SCO
I'm trying to virtualize an instance of SCO Open Server 5.0.2c in VirtualBox (called VM- A) , I can not configure the network (NIC).
The NIC I'm using is PCnet -FAST III (Am79C973 ) (this NIC works with VirtualBox + SCO 5.0.5M)
When I add from ' Add new LAN adapter' I detects the NIC... (2 Replies)
Discussion started by: flako
2 Replies
9. IP Networking
hi all. and sorry for the random question, but this sparkled a raging flame-war at work and i want more points of view
situation
a router, with linux of some sort,
dhcp client requesting for ip in wan1 (as usual with wan ports)
dhcp server listening in lan1, and assigning ip (as usual... (9 Replies)
Discussion started by: broli
9 Replies
LEARN ABOUT DEBIAN
merge_fonts
merge_fonts(3alleg4) Allegro manual merge_fonts(3alleg4)
NAME
merge_fonts - Merges two fonts into one font. Allegro game programming library.
SYNOPSIS
#include <allegro.h>
FONT *merge_fonts(FONT *f1, FONT *f2)
DESCRIPTION
This function merges the character ranges from two fonts and returns a new font containing all characters in the old fonts. In general, you
cannot merge fonts of different types (eg, TrueType fonts and bitmapped fonts), but as a special case, this function can promote a mono-
chrome bitmapped font to a color font and merge those. Example:
FONT *myfont;
FONT *myfancy_font;
FONT *lower_range;
FONT *upper_range;
FONT *capitals;
FONT *combined_font;
FONT *tempfont;
...
/* Create a font that contains the capitals from */
/* the fancy font but other characters from myfont */
lower_range = extract_font_range(myfont, -1, 'A'-1);
upper_range = extract_font_range(myfont, 'Z'+1, -1);
capitals = extract_font_range(myfancy_font, 'A', 'Z');
tempfont = merge_fonts(lower_range, capitals);
combined_font = merge_fonts(tempfont, upper_range);
/* Clean up temporary fonts */
destroy_font(lower_range);
destroy_font(upper_range);
destroy_font(capitals);
destroy_font(tempfont);
RETURN VALUE
Returns a pointer to the new font or NULL on error. Remember that you are responsible for destroying the font when you are finished with it
to avoid memory leaks.
SEE ALSO
extract_font_range(3alleg4), is_trans_font(3alleg4), is_color_font(3alleg4), is_mono_font(3alleg4), exfont(3alleg4)
Allegro version 4.4.2 merge_fonts(3alleg4)