Hi Does anyone know the command to configure HP tape slots. I have tried the following on Sun, but its notworking. This is the first time I have configured a tape drive with muiltple slots.
root@ssdb0009 # cfgadm -l
Ap_Id Type Receptacle Occupant Conditio... (3 Replies)
Hello,
I'm running Red Hat Linux on a Dell Poweredge 2650 Rack Server and wondered if anyone knew of a tool or command I could use to probe the memory slots on the motherboard.
I know the machine has six memory slots and currently contains 1GB RAM, what I don't know however, is if it contains... (3 Replies)
Has anyone ever relocated an HBA card after already having it configured in another PCI slot? I've found that the HBA instance #'s start incrementing past the previous. It results in me having to have my instance numbers in /kernel/drv/qla2300.conf be 4,5,6,7 instead of 0,1,2,3. Cleanup with... (5 Replies)
I've got lots of scsi transport errors on the E2900 - the HBA was replaced once out of curiosity but the problem still exists.
Feb 15 07:03:11 ivsdbch2 scsi: WARNING: /ssm@0,0/pci@18
,600000/SUNW,jfca@1,1/fp@0,0/ssd@w5005076300c889cb,4 (ssd21):
Feb 15 07:03:11 ivsdbch2 SCSI transport... (1 Reply)
I'm looking for open PCI slots in our array of sun boxes. I need help on how to distinguish if there's an open slot or not using prtdiag and prtconf. Is there a better tool for this? TIA.
Here's my prtdiag -v | grep pci:
pci 66 PCI5 SUNW,qlc-pci1077,2312 (scsi-+
... (9 Replies)
A while back I had a command that shows the memory slots (and info on the modules inserter) in an IBM AIX machine. I cannot remember it at this time, can someone help me out with this command please? (4 Replies)
Hi, all. I was wondering if there's a command or log file that will tell me how much RAM is in the system and, more specifically, the size of each stick.
Thanks,
Jason (3 Replies)
Hi,
I have a Sun Fire V440 server that fails to boot up correctly. A lot of services are not started and the sytems acts really slow to commands. During boot I can see the following Error:
WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
SCSI transport failed: reason 'reset': retrying... (15 Replies)
Discussion started by: oliwei
15 Replies
LEARN ABOUT NETBSD
eap
EAP(4) BSD Kernel Interfaces Manual EAP(4)NAME
eap -- AudioPCI audio device driver
SYNOPSIS
eap* at pci? dev ? function ?
audio* at audiobus?
joy* at eap?
midi* at eap?
options EAP_USE_BOTH_DACS
DESCRIPTION
The eap driver provides support for the Ensoniq AudioPCI and Creative Labs SoundBlaster PCI series of audio cards. All models based on the
ES1370, ES1371, and ES1373 chips are supported.
By specifying:
options EAP_USE_BOTH_DACS
a second audio device is attached. You can use it simply by directing audio output to it. This way it is possible for two different pro-
grams to use the "same" audio device simultaneously.
SEE ALSO ac97(4), audio(4), joy(4), midi(4), pci(4)HISTORY
The eap device driver appeared in NetBSD 1.4.
CAVEATS
The joystick port hardware works by emulating a legacy isa(4) joystick port, bypassing the pci(4) bus method for address allocation. This is
unlikely to work on PCI busses other than the primary one. There is also a possibility for conflicts with real ISA devices because the PCI
bus is probed before ISA. Use with caution.
BSD July 22, 2006 BSD