Your last line answered your own question - the file may have too many rows for your version of awk. Or too much data.
What do these commands show? And important: does wc -l show the number of rows you expected in the file? I am asking in case of file corruption. Barring corruption the file may be REALLY large, hence the ls -l question.
One for you - what is χ NGC 1856a - I can't seem to look up that NGC number 1856?
What confuses me is the 8 files were created in the same exact way (shown below) the sum script works for 6 of them and doesn't work for 2!!
The number of line (wc -l) is 165 as expected. Here is how these files were created (that's why I am not getting what is different about getting the sum of 2 of these ResultChiNGC*):
Hi
I want to sum of 3 columns in file.
Example: I want to sum of 3 ,6,8 th columns in file(SUM(3,6,8)).
Using awk can sum of single column
awk '{a+=$3} END {printf ("%f\n",a)' file_name
Thanks inadvance
MR (2 Replies)
Hello everyone I need to write a script that sums numbers passed to it as arguments on the command line and displays the results. I must use a for loop and then rewrite it using a while loop. It would have to output something like 10+20+30=60
this is what I have so far
fafountain@hfc:~$ vi sum... (1 Reply)
Hi
i data looks like this:
student 1
Subject1 45 55
Subject2 44 55
Subject3 33 44
//
student 2
Subject1 45 55
Subject2 44 55
Subject3 33 44
i would like to sum $2, $3 (marks) and divide each entry in $2 and $3 with their respective sums and print for each student as $4 and... (2 Replies)
Hi
I need to incorporate a 'sum' as follows into a script and not sure how. I have a variable per line and I need them to be summed, e.g below
1
23
1,456
1
1
34
46
How do I calculate the sum of all these numbers to ouptut the answer ( 1,562)
Thanks in advance (3 Replies)
Hi, Unix Gurus,
I need sum values from a file. file format like:
0004004
0000817
0045000
0045000
0045000
0045000
0045000
0045000
0045000
0045000
0045000
0045000
0004406
the result should be 459227 (817+45000 ... + 4406)
anybody can help me out (7 Replies)
I have a list of values ( in Kb) I have the following code to sum up the values and convert the total to GB
cat list
701368101370
101370101370
801554101370
701636101370
101757101370
101876101370
901951101370
And this is the output of my script
awk '{ s += $1 } END {... (3 Replies)
Hi Friends,
I have a file with fields separated with comma. How to print sum of each field of the file?
Eg:
input file
1,3,6,7
2,1,2,1
0,1,1,0
I want to sum each field separately.
Output file
3,5,9,8
Thanks,
Suresh (2 Replies)
HI Guys,
I gave Input file F.Txt
ID H1 H2 H3 H4 H5
A 5 6 7 8 9
B 4 65 4 4 7
C 4 4 4 4 4
D 4 4 4 4 4
Output :-
ID H1 H2 H3 H4 H5
Total 17 79 19 20 24
Sum of Each Columns (8 Replies)
Discussion started by: pareshkp
8 Replies
LEARN ABOUT CENTOS
trace-cmd-restore
TRACE-CMD-RESTORE(1)TRACE-CMD-RESTORE(1)NAME
trace-cmd-restore - restore a failed trace record
SYNOPSIS
trace-cmd restore [OPTIONS] [command] cpu-file [cpu-file ...]
DESCRIPTION
The trace-cmd(1) restore command will restore a crashed trace-cmd-record(1) file. If for some reason a trace-cmd record fails, it will
leave a the per-cpu data files and not create the final trace.dat file. The trace-cmd restore will append the files to create a working
trace.dat file that can be read with trace-cmd-report(1).
When trace-cmd record runs, it spawns off a process per CPU and writes to a per cpu file usually called trace.dat.cpuX, where X represents
the CPU number that it is tracing. If the -o option was used in the trace-cmd record, then the CPU data files will have that name instead
of the trace.dat name. If a unexpected crash occurs before the tracing is finished, then the per CPU files will still exist but there will
not be any trace.dat file to read from. trace-cmd restore will allow you to create a trace.dat file with the existing data files.
OPTIONS -c
Create a partial trace.dat file from the machine, to be used with a full trace-cmd restore at another time. This option is useful for
embedded devices. If a server contains the cpu files of a crashed trace-cmd record (or trace-cmd listen), trace-cmd restore can be
executed on the embedded device with the -c option to get all the stored information of that embedded device. Then the file created
could be copied to the server to run the trace-cmd restore there with the cpu files.
If *-o* is not specified, then the file created will be called
'trace-partial.dat'. This is because the file is not a full version
of something that trace-cmd-report(1) could use.
-t tracing_dir
Used with -c, it overrides the location to read the events from. By default, tracing information is read from the debugfs/tracing
directory. -t will use that location instead. This can be useful if the trace.dat file to create is from another machine. Just tar
-cvf events.tar debugfs/tracing and copy and untar that file locally, and use that directory instead.
-k kallsyms
Used with -c, it overrides where to read the kallsyms file from. By default, /proc/kallsyms is used. -k will override the file to read
the kallsyms from. This can be useful if the trace.dat file to create is from another machine. Just copy the /proc/kallsyms file
locally, and use -k to point to that file.
-o output'
By default, trace-cmd restore will create a trace.dat file (or trace-partial.dat if -c is specified). You can specify a different file
to write to with the -o option.
-i input
By default, trace-cmd restore will read the information of the current system to create the initial data stored in the trace.dat file.
If the crash was on another machine, then that machine should have the trace-cmd restore run with the -c option to create the trace.dat
partial file. Then that file can be copied to the current machine where trace-cmd restore will use -i to load that file instead of
reading from the current system.
EXAMPLES
If a crash happened on another box, you could run:
$ trace-cmd restore -c -o box-partial.dat
Then on the server that has the cpu files:
$ trace-cmd restore -i box-partial.dat trace.dat.cpu0 trace.dat.cpu1
This would create a trace.dat file for the embedded box.
SEE ALSO trace-cmd(1), trace-cmd-record(1), trace-cmd-report(1), trace-cmd-start(1), trace-cmd-stop(1), trace-cmd-extract(1), trace-cmd-reset(1),
trace-cmd-split(1), trace-cmd-list(1), trace-cmd-listen(1)AUTHOR
Written by Steven Rostedt, <rostedt@goodmis.org[1]>
RESOURCES
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
COPYING
Copyright (C) 2010 Red Hat, Inc. Free use of this software is granted under the terms of the GNU Public License (GPL).
NOTES
1. rostedt@goodmis.org
mailto:rostedt@goodmis.org
06/11/2014 TRACE-CMD-RESTORE(1)