join might do what you need. Now to make it clearer, I changed file1 to:
So with join, you get:
You can use awk, sed, cut, or many other commands to trim off the first field:
Hi All,
I have two files and data looks like this:
File1 Contents
#Field1,Field2
Dist_Center_file1.txt;21
Dist_Center_file3.txt;20
Dist_Center_file2.txt;20
File2 Contents (*** No Header ***)
Dist_Center_file1.txt;23
Dist_Center_file2.txt;20
Dist_Center_file3.txt;20
I have... (4 Replies)
Hi unix gurus,
I have a urgent requirement, I need to write a AWK script to compare each fields in 2 files using AWK.
Basically my output should be like this.
file1
row|num1|num2|num3
1|one|two|three
2|one|two|three
file2
row|num1|num2|num3
1|one|two|three
2|one|two|four
... (5 Replies)
Hi All,
Looking for a quick AWK script to output some differences between two files.
FILE1
device1 1.1.1.1 PINGS
device1 2.2.2.2 PINGS
FILE2
2862 SITE1 device1-prod 1.1.1.1 icmp - 0 ... (4 Replies)
Dear experts
I have files like
ABD : 5869 events, relative ratio : 1.173800E-01 , sum of ratios : 1.173800E-01
VBD : 12147 events, relative ratio : 2.429400E-01 , sum of ratios : 3.603200E-01
SDF : 17000 events, relative ratio : 3.400000E-01 , sum of ratios : 7.003200E-01
OIP: 14984... (9 Replies)
Hi,
I need the most efficient way of comparing the following and arriving at the result
I have a file which has entries like,
File1:
1|2|5|7|8|2|3|6|3|1
File2:
1|2|3|1|2|7|9|2
I need to compare the entries in these two file with those of a general file,
1|2|3|5|2|5|6|9|3|1... (7 Replies)
Hi,
I have two text files, compare column one in both the files and if it matches then the output should contain the id in column one, the number and the description.
Both the files are sorted. Is there a one liner to get this done, kindly help. Thank you
File 1:
NC_000964 92.33 ... (2 Replies)
Guys,
I tried searching on the internet and I couldn't get the answer for this problem. I have 3 files. First 2 fields of all of them are of same type, say they come from various databases but first two fields in the 3 files means the same.
I need to verify the entries that are not present... (4 Replies)
I am trying to compare two files (separted by a pipe) using 2 fields (field 1,3 from fileA and 1,2 from fileB) if the two files match i want the whole record of fileA adding the extra fields left from fileB.
1. A.txt
cat|floffy|12|anything|anythings
cat|kitty|15|lala|lalala... (6 Replies)
Hi,
I am trying to check two files based on certain string and field.
cat f1
source=\GREP\"
hi this \\
source=\SED\"
skdmsmd
dnksdns
source=\PERL\"
cat f2
source=\SED\"
source=\GREP\"
vlamskds
amdksk m
source=\AWK\"
awk \here\" (3 Replies)
Hi,
Below are the sample files. x.txt is from an Excel file that is a list of users from Windows and y.txt is a list of database account.
$ head -500 x.txt y.txt
==> x.txt <==
TEST01 APP_USER_PROFILE
USER03 APP_USER_PROFILE
TEST02 APP_USER_EXP_PROFILE
TEST04 APP_USER_PROFILE
USER01 ... (3 Replies)
Discussion started by: newbie_01
3 Replies
LEARN ABOUT NETBSD
join
JOIN(1) BSD General Commands Manual JOIN(1)NAME
join -- relational database operator
SYNOPSIS
join [-a file_number | -v file_number] [-e string] [-j file_number field] [-o list] [-t char] [-1 field] [-2 field] file1 file2
DESCRIPTION
The join utility performs an ``equality join'' on the specified files and writes the result to the standard output. The ``join field'' is
the field in each file by which the files are compared. The first field in each line is used by default. There is one line in the output
for each pair of lines in file1 and file2 which have identical join fields. Each output line consists of the join field, the remaining
fields from file1 and then the remaining fields from file2.
The default field separators are tab and space characters. In this case, multiple tabs and spaces count as a single field separator, and
leading tabs and spaces are ignored. The default output field separator is a single space character.
Many of the options use file and field numbers. Both file numbers and field numbers are 1 based, i.e. the first file on the command line is
file number 1 and the first field is field number 1. The following options are available:
-a file_number
In addition to the default output, produce a line for each unpairable line in file file_number. (The argument to -a must not be
preceded by a space; see the COMPATIBILITY section.)
-e string Replace empty output fields with string.
-o list The -o option specifies the fields that will be output from each file for each line with matching join fields. Each element of
list has the form 'file_number.field', where file_number is a file number and field is a field number. The elements of list must
be either comma (``,'') or whitespace separated. (The latter requires quoting to protect it from the shell, or, a simpler
approach is to use multiple -o options.)
-t char Use character char as a field delimiter for both input and output. Every occurrence of char in a line is significant.
-v file_number
Do not display the default output, but display a line for each unpairable line in file file_number. The options -v 1 and -v 2
may be specified at the same time.
-1 field Join on the field'th field of file 1.
-2 field Join on the field'th field of file 2.
When the default field delimiter characters are used, the files to be joined should be ordered in the collating sequence of sort(1), using
the -b option, on the fields on which they are to be joined, otherwise join may not report all field matches. When the field delimiter char-
acters are specified by the -t option, the collating sequence should be the same as sort(1) without the -b option.
If one of the arguments file1 or file2 is ``-'', the standard input is used.
The join utility exits 0 on success, and >0 if an error occurs.
COMPATIBILITY
For compatibility with historic versions of join, the following options are available:
-a In addition to the default output, produce a line for each unpairable line in both file 1 and file 2. (To distinguish between
this and -a file_number, join currently requires that the latter not include any white space.)
-j1 field Join on the field'th field of file 1.
-j2 field Join on the field'th field of file 2.
-j field Join on the field'th field of both file 1 and file 2.
-o list ...
Historical implementations of join permitted multiple arguments to the -o option. These arguments were of the form ``file_num-
ber.field_number'' as described for the current -o option. This has obvious difficulties in the presence of files named ``1.2''.
These options are available only so historic shell scripts don't require modification and should not be used.
SEE ALSO awk(1), comm(1), paste(1), sort(1), uniq(1)STANDARDS
The join command is expected to be IEEE Std 1003.2 (``POSIX.2'') compatible.
BSD April 28, 1995 BSD