hdisk mapping to a vSCSi Adapter Post: 302578597

10 More Discussions You Might Find Interesting

1. AIX

vpath to an hdisk

Is there a simply way for me to map a vpath to an hdisk on AIX 5.2?

2. AIX

Migrating hdisks from vscsi to NPIV with powerpath

Hi All, I'm preparing to migrate some servers from vscsi to pass-thru NPIV. I am planning to have the SAN team move the exact LUNs from vio1/vio2 to those two VWWN through NPIV. My question is on the partition itself.. right now, let's say I have hdisk0/1/2/3/4 that are part of datavg. They...

3. AIX

Vscsi and npiv on same adapter

Hi, I want to change from vscsi to npiv. Is it possible to use both on the same adapter, so we can change the systems one by one, or must we place a second FC adapter in the VIO servers? Thanks, Ronald

4. Shell Programming and Scripting

Creating unique mapping from multiple mapping

Hello, I do not know if this is the right title to use. I have a large dictionary database which has the following structure: where a b c d e are in English and p q r s t are in a target language., the two separated by the delimiter =. What I am looking for is a perl script which will take...

5. AIX

Kdb - vscsi disk mapping from AIX 5.3 CLIENT side

If you're familiar with vscsi mappings thru a VIO Server, you are probably aware, on an AIX 6.1 Client LPAR, that: print cvai | kdbcan provide useful information to you.... like VIO Server name & vhost #. But, "cvai" does not appear to be part of the Kernel Debugger in AIX 5.3. My question is...

6. AIX

How to put vscsi in available state?

Hello Friends, My question/problem is that I noticed 2 servers in my environment vscsi is showing up as defined (not available) or is defined and not showing the path to both vscsi's when ruining lspath command. I am new to AIX admin, work alone, and work in an small environment. My question is,...

7. AIX

How can I map hdisk# to rhdisk#?

Some storage/disks have been added to an existing AIX 6.1 server. The admin sent me the list of hdisk#'s for the new disks, but I need the corresponding rhdisk# for the same hdisk. (I know from past experience that the rhdisk that maps to an hdisk is not always the same number. For instance,...

8. AIX

Devices.vscsi.disk ?

Hello, When I assigned CDROM from IVM (VIOS) to LPAR and then running cfgmgr i get the following message on the client lpar #cfgmgr cfgmgr: 0514-621 WARNING: The following device packages are required for device support but are not currently installed. devices.vscsi.disk searching...

9. UNIX for Advanced & Expert Users

Unable to install client AIX LPAR to vscsi hdisk provided from VIOS

Hi everybody, I have Power5 server with 4 internal hdisks each of 70Gb. VIOS server was installed via Virtual I/O Server Image Repository on the HMC. HMC release - 7.7.0 VIOS rootvg installed on 2 disk(these disks merged to one storage pool during VIOS install process),and 2 others hdisks...

10. AIX

Misconfiguration detected Adapter interface name en 3 Adapter offset 0

Hi, We had a hardware problem with an IBM System p5 server, with AIX 5.2 We restore from a tape the last backup we had, but the server does not boot up as expected. The server try to mount some directories from a storage, but could not comunicate with them, we check the FC and everything is...

LEARN ABOUT HPUX

curs_beep

curs_beep(3CURSES)					     Curses Library Functions						curs_beep(3CURSES)

NAME

       curs_beep, beep, flash - curses bell and screen flash routines

SYNOPSIS

       cc [ flag ... ] file ... -lcurses [ library ... ]
       #include <curses.h>

       int beep(void);

       int flash(void);

DESCRIPTION

       The  beep() and flash() routines are used to signal the terminal user. The routine beep() sounds the audible alarm on the terminal, if pos-
       sible; if that is not possible, it flashes the screen (visible bell), if that is possible. The routine flash() flashes the screen,  and	if
       that  is not possible, sounds the audible signal. If neither signal is possible, nothing happens. Nearly all terminals have an audible sig-
       nal (bell or beep), but only some can flash the screen.

RETURN VALUES

       These routines always return OK.

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |MT-Level		     |Unsafe			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       curses(3CURSES), attributes(5)

NOTES

       The header <curses.h> automatically includes the headers  <stdio.h> and <unctrl.h>.

SunOS 5.10							    31 Dec 1996 						curs_beep(3CURSES)

10 More Discussions You Might Find Interesting

1. AIX

vpath to an hdisk

Discussion started by: 2dumb

2. AIX

Migrating hdisks from vscsi to NPIV with powerpath

Discussion started by: lapfrank

3. AIX

Vscsi and npiv on same adapter

Discussion started by: ronaldm60

4. Shell Programming and Scripting

Creating unique mapping from multiple mapping

Discussion started by: gimley