There is no package at the moment, it will be done in a following step (as per the document I am using - that was used by a colleague before and worked fine).
What I am trying to do is to have a cluster, I already have the storage properly configured (EVA).
lan0 is the primary and lan2 is used as the heartbeat, I already changed that via vi in the cmclconf.ascii file
Below is the vgdisplay -v output.
Code:
# vgdisplay -v
--- Volume groups ---
VG Name /dev/vg00
VG Write Access read/write
VG Status available
Max LV 255
Cur LV 8
Open LV 8
Max PV 16
Cur PV 1
Act PV 1
Max PE per PV 4384
VGDA 2
PE Size (Mbytes) 32
Total PE 4374
Alloc PE 510
Free PE 3864
Total PVG 0
Total Spare PVs 0
Total Spare PVs in use 0
--- Logical volumes ---
LV Name /dev/vg00/lvol1
LV Status available/syncd
LV Size (Mbytes) 320
Current LE 10
Allocated PE 10
Used PV 1
LV Name /dev/vg00/lvol2
LV Status available/syncd
LV Size (Mbytes) 4096
Current LE 128
Allocated PE 128
Used PV 1
LV Name /dev/vg00/lvol3
LV Status available/syncd
LV Size (Mbytes) 544
Current LE 17
Allocated PE 17
Used PV 1
LV Name /dev/vg00/lvol4
LV Status available/syncd
LV Size (Mbytes) 224
Current LE 7
Allocated PE 7
Used PV 1
LV Name /dev/vg00/lvol5
LV Status available/syncd
LV Size (Mbytes) 32
Current LE 1
Allocated PE 1
Used PV 1
LV Name /dev/vg00/lvol6
LV Status available/syncd
LV Size (Mbytes) 2976
Current LE 93
Allocated PE 93
Used PV 1
LV Name /dev/vg00/lvol7
LV Status available/syncd
LV Size (Mbytes) 3520
Current LE 110
Allocated PE 110
Used PV 1
LV Name /dev/vg00/lvol8
LV Status available/syncd
LV Size (Mbytes) 4608
Current LE 144
Allocated PE 144
Used PV 1
--- Physical volumes ---
PV Name /dev/dsk/c2t0d0
PV Status available
Total PE 4374
Free PE 3864
Autoswitch On
VG Name /dev/vglock
VG Write Access read/write
VG Status available
Max LV 255
Cur LV 1
Open LV 1
Max PV 16
Cur PV 2
Act PV 2
Max PE per PV 25599
VGDA 4
PE Size (Mbytes) 4
Total PE 51195
Alloc PE 50
Free PE 51145
Total PVG 0
Total Spare PVs 0
Total Spare PVs in use 0
--- Logical volumes ---
LV Name /dev/vglock/lvdata
LV Status available/syncd
LV Size (Mbytes) 200
Current LE 50
Allocated PE 50
Used PV 1
--- Physical volumes ---
PV Name /dev/dsk/c4t0d1
PV Status available
Total PE 25599
Free PE 25599
Autoswitch On
PV Name /dev/dsk/c4t0d2
PV Status available
Total PE 25596
Free PE 25546
Autoswitch On
i'm trying to set up my internet connection and i was told i need to edit the file
/etc/ppp/pap-secrets
but i get a permission denied message...why?? (6 Replies)
I just started computer science at UW Milwaukee. When I access the university Solaris system from PuTTY, I get permission denied when I try to access the file I wrote. Now I really have no idea what I'm doing, I just don't understand why I get permission denied in my won directory. Thank You
... (0 Replies)
Hi,
I can not execute a .env file
$ . /Data/oracle/d03/mydbora/8.0.6/MYDB.env
-bash: /Data/oracle/d03/mydbora/8.0.6/MYDB.env: Permission denied
Even if :
-rwxrwxrwx 1 oracle dba 2903 Mar 5 2007 /Data/oracle/d03/mydbora/8.0.6/MYDB.env
Please help.
Many thanks. (1 Reply)
I'll start off by saying that I know very little about Unix - however, I do know that I have a .profile file in my home directory, and that I should be able to invoke it by typing . profile. However, when I do this for ANY .filename, I get ".: Permission denied". I'm pretty sure that there is... (12 Replies)
I would like to copy data from local mechine to cluster. Basically, I typed
scp -r DVD/ acount@cluster:/
it shows Permission denied.
Could anyone please give me a clue to write permission on cluster, please?
The poperty of where on cluster I'd like to put is drwxr-xr-x
Any idea would... (1 Reply)
Hi guys im new to this db
i have a small prob while installing websphereportal6.1i think i was installed succesfully
but the error im getting is while starting server.
check this out
# ./serverStatus.sh -all
Error loading: /usr/wps61/AppServer/java/jre/bin/classic/libjvm.so: cannot... (1 Reply)
I created a user so that when he logs in he will be directed to a menu
/etc/passwd
user1:x:115:1:Support -SysAd:/export/home/user1:/export/home/suppotrmenu/script.sh
However when I logged in remotely from another server by ssh user1@1.1.1.1 , it saysexport/home/suppotrmenu/script.sh:... (4 Replies)
I am using korn shell
When I type in Telnet on cmd line, I get message
"cannot execute"
How can I get permission to execute command ? In which dir is telnet located ? I looked in /usr/bin dir. but its not there
Thanks (1 Reply)