11-18-2011
: ) Thanks again For the Reply , Am an Application guy, But able to understand your reply ,
Now
For our system , at the present scenario, Whether to Configure more Physical Ram or swap usage ?
Now my question is
1. In the posted glance output , under what scenario the swap util Reaches 100% From the current value of 64%
2. Is the Following achievable
on the system what configurations has to be done , so that when usage of physical memory reaches 85% , at this point,
system should start using the swap configured , once this swap configured gets used 100% , than it should start consuming
the Remaining portion of the physical memory i e 15%
also unable to digest , how the swap used on HP UX
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Is there any problems of binaries compatibility between HPUX 10.20 et 11 ? (2 Replies)
Discussion started by: Olivier
2 Replies
2. UNIX for Dummies Questions & Answers
When i re-updated my system i set my swap at 500 MB. I have 256 in ram and have never even gone into the 250 mb of swap that i had originally configured. How do I reduce the swap? (3 Replies)
Discussion started by: macdonto
3 Replies
3. UNIX for Dummies Questions & Answers
Hi,
I am a SAP Basis admin recentely been asked to administer a HPUX server. Could someone recommend some good study material to learn with the Sap
prespective.
-carry (1 Reply)
Discussion started by: carryclare
1 Replies
4. UNIX for Dummies Questions & Answers
Is it really so that if swap will be located in the begining of hard drive, than it will work faster? (1 Reply)
Discussion started by: Ty3
1 Replies
5. Solaris
Hello and thanks in advance.
I have a Sun box with raid 1 on the O/S disks using solaris svm.
I want to unmirror my swap partition, and add the slice on the second disk as an additional swap device. This would give me twice as much swap space.
I have been warned not to do this by some... (3 Replies)
Discussion started by: BG_JrAdmin
3 Replies
6. Shell Programming and Scripting
I am running HPUX and using WLM (workload manager). I want to write a script to fork CPUs to basically take CPUs from other servers to show that the communication is working and CPU licensing is working. Basically, I want to build a script that will use up CPU on a server. Any ideas? (2 Replies)
Discussion started by: cpolikowsky
2 Replies
7. Red Hat
free -m : 1023 total swap space
created default partition /dev/sdb1 50M using fdisk. i did write the changes.
#mkswap /dev/sdb1
#swapon /dev/sdb1
free -m : 1078 total swap space
this shows that the swap is on
Question : i did not change the type LINUX SWAP (82) in fdisk.
so why is... (5 Replies)
Discussion started by: dplinux
5 Replies
8. HP-UX
Hi
I have an integrity machine rx7620 and rx8640 running hp-ux 11.31. I'm planning to fine tune the system:
- I would like to know when does the memory swap space spill over to the device swap space?
- And how much % of memory swap utilization should be specified (swap space device... (6 Replies)
Discussion started by: lamoul
6 Replies
9. HP-UX
I'm sharing this in case anybody needs it. Modified from the original solaris pwage script. This modified hpux script will check /etc/password file on hpux trusted systems search /tcb and grep the required u_succhg field. Calculate days to expiry and notify users via email.
original solaris... (2 Replies)
Discussion started by: sparcguy
2 Replies
10. Solaris
Hi Solaris Folks :),
I need to calculate the swap usage on solaris server, please let me understand the output of below swap -s and swap -l commands.
$swap -s
total: 1774912k bytes allocated + 240616k reserved = 2015528k used, 14542512k available
$swap -l
swapfile dev swaplo... (6 Replies)
Discussion started by: seenuvasan1985
6 Replies
LEARN ABOUT SUSE
cpufreq-set
cpufreq-set(1) cpufreq-set(1)
NAME
cpufreq-set - A small tool which allows to modify cpufreq settings.
SYNTAX
cpufreq-set [options]
DESCRIPTION
cpufreq-set allows you to modify cpufreq settings without having to type e.g. "/sys/devices/system/cpu/cpu0/cpufreq/scaling_set_speed" all
the time.
OPTIONS
-c --cpu <CPU>
number of CPU where cpufreq settings shall be modified.
-d --min <FREQ>
new minimum CPU frequency the governor may select.
-u --max <FREQ>
new maximum CPU frequency the governor may select.
-g --governor <GOV>
new cpufreq governor.
-f --freq <FREQ>
specific frequency to be set. Requires userspace governor to be available and loaded.
-r --related
modify all hardware-related CPUs at the same time
-h --help
Prints out the help screen.
REMARKS
Omitting the -c or --cpu argument is equivalent to setting it to zero.
The -f FREQ, --freq FREQ parameter cannot be combined with any other parameter except the -c CPU, --cpu CPU parameter.
FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz by postfixing the value with the wanted unit name, without any space (fre-
quency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).
On Linux kernels up to 2.6.29, the -r or --related parameter is ignored.
FILES
/sys/devices/system/cpu/cpu*/cpufreq/
/proc/cpufreq (deprecated)
/proc/sys/cpu/ (deprecated)
AUTHORS
Dominik Brodowski <linux@brodo.de> - author
Mattia Dongili<malattia@gmail.com> - first autolibtoolization
SEE ALSO
cpufreq-info(1)
Mattia Dongili 0.1 cpufreq-set(1)