11-15-2011
It will only work if:
1) port is free (or unused...)
2) both machines are configured to use that port...
Is this the case?
9 More Discussions You Might Find Interesting
1. Solaris
hi i have a sun machine which has one hba 2ports;
out of which one port says it is not connected
# luxadm -e port
/devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
/devices/pci@1d,700000/SUNW,qlc@1,1/fp@0,0:devctl NOT CONNECTED
but both... (9 Replies)
Discussion started by: anwesh
9 Replies
2. Solaris
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Discussion started by: bobby320
3 Replies
3. IP Networking
Hi,
I am trying to set up a dev environment and I have Ubuntu server (10.16.1.92) and a CentOS VM (10.16.3.235) on this. On the CentOS I have a program running on port 5433. Now my problem is that I am unable to telnet this port from another Windows server whereas I can telnet port 22 from... (5 Replies)
Discussion started by: rishav
5 Replies
4. Shell Programming and Scripting
Hi Guys,
I saw this line of code in a script
sftp username@hostname#2200
get file
and the script never asked for password. Can you please explain on this?:confused: (9 Replies)
Discussion started by: PikK45
9 Replies
5. IP Networking
i want to kill a tcp connection by killing its pid
with netstat -an i got the tcp ip connection on port 5914
but when i type ps -a or ps-e there is not such process running on port 5914
is it possible that because i do not log on with proper user account i can not see that process running? (30 Replies)
Discussion started by: alinamadchian
30 Replies
6. Solaris
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies
7. Solaris
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
8. Shell Programming and Scripting
Hi Expert,
Anybody can figure it out on how to generate new port base on my last port let say my last port var1=124 and increment for new port 125,126 but this new two ports need to look at first if this port is not in used by any service, if the port is in used add 1 to new port and if in used... (6 Replies)
Discussion started by: lxdorney
6 Replies
9. UNIX for Beginners Questions & Answers
hi,
i would like to create a bash script that check which port in my Linux server are closed (not in use) from a specific range, port range (3000-3010).
the print output need to be only 1 port, and it will be nice if the output will be saved as a variable or in same file.
my code is:
... (2 Replies)
Discussion started by: yossi
2 Replies
LPT(4) BSD Kernel Interfaces Manual LPT(4)
NAME
lpt -- generic printer device driver
SYNOPSIS
device ppc
device ppbus
device lpt
DESCRIPTION
The current lpt driver is the port of the original lpt driver to the ppbus(4) system.
One purpose of this port was to allow parallel port sharing with other parallel devices. Secondly, inb()/outb() calls have been replaced by
ppbus function calls. lpt is now arch-independent thanks to the ppbus interface. See ppbus(4) for more info about the ppbus system.
The parallel port bus is allocated by lpt when the printer device is opened and released only when the transfer is completed: either when the
device is closed or when the entire buffer is sent in interrupt driven mode.
The driver can be configured to be either interrupt-driven, or to poll the printer. Ports that are configured to be interrupt-driven can be
switched to polled mode by using the lptcontrol(8) command.
Depending on your hardware, extended capabilities may be configured with the lptcontrol(8) command. With an ECP/ISA port, you can take
advantage of FIFO and DMA.
In order to retrieve printer info from /dev/lpt0, just apply the cat command to the device. If the printer supports IEEE1284 nibble mode and
has data to send to the host, you will get it.
FILES
/dev/lpt0 first parallel port driver
SEE ALSO
ppbus(4), ppc(4), lptcontrol(8)
HISTORY
This driver replaces the functionality of the lpa driver, which is now defunct.
BUGS
There are lots of them, especially in cheap parallel port implementations.
It is only possible to open a lpt port when a printer is connected and on-line, making it impossible to run lptcontrol(8) when there is no
printer connected.
This driver could still stand a rewrite.
BSD
February 14, 1999 BSD