I am not sure why you would add the "-l" (long listing) which makes you use awk to remove the columns given with a long listing. You could remove the "-r" (reverse order) and "-l" (long listing) flags and use the "-w1" or "-1" (force 1 column width/1 file per line) for a better method would be:
or
With an "ls" based command string you would have the added risk of finding directories as well as files. If someone were to create a directory after the last logfile was created and then that script/command ran you would get unexpected results.
Last edited by ddreggors; 10-20-2011 at 12:58 AM..
Reason: Additional Thoughts...
Hi all,
i would like to write the shell script program, it can monitor the access_log "real time"
when the access_log writing the line contain "abcdef" the program will be "COPY" this line into a file named "abcdef.txt", do the same thing if the contain "123456" "COPY" it into a file named... (3 Replies)
I want to have a terminal open and have something like a "repeating cat" command running in it for a certain text file (in particular /var/log/system.log). So my terminal will scan or cat the text file every so often or whenever the text file system.log gets written to by the system, it will... (1 Reply)
Dear experts,
I have an epoch time input file such as : -
1302451209564
1302483698948
1302485231072
1302490805383
1302519244700
1302492787481
1302505299145
1302506557022
1302532112140
1302501033105
1302511536485
1302512669550
I need the epoch time above to be converted into real... (4 Replies)
Hi Guys,
I am developing a script to monitor log file Generated every hour.
When creating a new file scripts not working.
My Code . I want to monitor GatewayTransaction.yyyymmdd-hh.log
while true; do newdate=$(date '+%Y%m%d') ; nowdate=$(date '+%Y%m%d-%H.log'); tail -f... (7 Replies)
I have directory with shorcuts of files.
for example:
gara@yn\short\name1 ( shortcut to gara@yn\FOLDER\OPT\GARA\1.jpg )
gara@yn\short\name2 ( shortcut to gara@yn\FOLDER\OPT\GARA\11.jpg )
gara@yn\short\name3 ( shortcut to gara@yn\MARA\URSA\2.jpg )
gara@yn\short\name4 ( shortcut to... (6 Replies)
Hi
I have a file which is updated very frequently.
Where in i wanted to use tail -f command in the script and wanted to grep for a particular word.
But the issue is when i use tail -f filename|grep "word" ...
it will show me blank until the word is found in the real time. if it shows... (13 Replies)
Hi,
I have a log file that gets updated every second. Currently the size has grown to 20+ GB. I need to have a command/script, that will try to get the actual size of the file and will remove 50% of the data that are in the log file. I don't mind removing the data as the size has grown to huge... (8 Replies)
Hello All,
I am building a real time parser for a log file in my application.
The log file is continuously written at a very fast pace and gets rolled over every 10 minutes.
I have measured the speed and observed that around 1000 lines are written to it every second, each line about 30-40... (7 Replies)
Discussion started by: cool.aquarian
7 Replies
LEARN ABOUT DEBIAN
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)