10-12-2011
Quote:
This is a bare metal restore to a dissimilar hardware.
It is almost certain that you will need a new kernel at a minimum.
8 More Discussions You Might Find Interesting
1. Solaris
Hi,
I've just bought an Ultra 60 running solaris 9 (or so I've been led to believe). When I start up, it looks for a (presumably) domain/network to hook up to and the following messages are displayed:
Boot device: net file and args:
Network link setup failed
Please check cable and try... (3 Replies)
Discussion started by: alarmcall
3 Replies
2. Solaris
I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
Discussion started by: kymberm
3 Replies
3. UNIX for Dummies Questions & Answers
Trying to run an X11 executable under Darwin, I keep getting:
dyld: Library not loaded: /sw/lib/libglib-1.2.0.dylib
Referenced from: /usr/X11R6/bin/wav2rsomac
Reason: image not found
Trace/BPT trap
I can't figure out if this is an error in the way the program is running, or if the... (0 Replies)
Discussion started by: sansan
0 Replies
4. AIX
Hello:
NOOB here. I attempted to use smit mkcd. Failed on first attempt, not enough space. 2nd attempt tried to place iso on /usr, not enough space there. Cleanup ran for about 5 minutes after aborting. Now AIX won't boot. LCD display on 7029-6E3 says: 0517 MOUNT /USR. Attempted to boot from CD... (11 Replies)
Discussion started by: bbird
11 Replies
5. UNIX for Dummies Questions & Answers
Hi Folks,
Have anyone install FreeBSD on 1TB hard drive and
have problem like not able to boot into the system?
Well, I just purchase a new Maxtor 1TB SATA 300 hard drive
and install FreeBSD on it, everything install
well, but then reboot and all I get is just a display
cursor.... nothing... (0 Replies)
Discussion started by: bsdme2
0 Replies
6. Solaris
Hi all,
I've somehow gained the idea that I _need_ to run at least 1 box with Solaris, but things don't go as I had planned :-)
I pulled this ancient IBM eserver xseries 305 out of the dust, and got myself a fresh copy of the required cd's for Solaris 10u7. FAIL, for some reason the box and the... (7 Replies)
Discussion started by: mr.aart
7 Replies
7. Solaris
Hi All,
I have installed Solaris 10 on my AMD 64 3000+ system. I was playing with grub commands eeprom and bootadm commands. I screwed my boot-file and now am unable to boot the system. Gets error msg as "panic: cannot open /kernel/amd64/unix". I booted the system is filesafe and tried update the... (2 Replies)
Discussion started by: Manjunath K V
2 Replies
8. Red Hat
Hi,
I´ve given only this info to configure a network interface : "port 1 PCI 4"
I´ve been searching for any kind of relationship in the system which allow me to find the etc that must be configured...
Please, could anybody help me?
rhxx:#/root# lspci |grep -i "PCI BRIDGE"
00:01.0 PCI... (0 Replies)
Discussion started by: pabloli150
0 Replies
LEARN ABOUT CENTOS
shell-quote
SHELL-QUOTE(1) User Contributed Perl Documentation SHELL-QUOTE(1)
NAME
shell-quote - quote arguments for safe use, unmodified in a shell command
SYNOPSIS
shell-quote [switch]... arg...
DESCRIPTION
shell-quote lets you pass arbitrary strings through the shell so that they won't be changed by the shell. This lets you process commands
or files with embedded white space or shell globbing characters safely. Here are a few examples.
EXAMPLES
ssh preserving args
When running a remote command with ssh, ssh doesn't preserve the separate arguments it receives. It just joins them with spaces and
passes them to "$SHELL -c". This doesn't work as intended:
ssh host touch 'hi there' # fails
It creates 2 files, hi and there. Instead, do this:
cmd=`shell-quote touch 'hi there'`
ssh host "$cmd"
This gives you just 1 file, hi there.
process find output
It's not ordinarily possible to process an arbitrary list of files output by find with a shell script. Anything you put in $IFS to
split up the output could legitimately be in a file's name. Here's how you can do it using shell-quote:
eval set -- `find -type f -print0 | xargs -0 shell-quote --`
debug shell scripts
shell-quote is better than echo for debugging shell scripts.
debug() {
[ -z "$debug" ] || shell-quote "debug:" "$@"
}
With echo you can't tell the difference between "debug 'foo bar'" and "debug foo bar", but with shell-quote you can.
save a command for later
shell-quote can be used to build up a shell command to run later. Say you want the user to be able to give you switches for a command
you're going to run. If you don't want the switches to be re-evaluated by the shell (which is usually a good idea, else there are
things the user can't pass through), you can do something like this:
user_switches=
while [ $# != 0 ]
do
case x$1 in
x--pass-through)
[ $# -gt 1 ] || die "need an argument for $1"
user_switches="$user_switches "`shell-quote -- "$2"`
shift;;
# process other switches
esac
shift
done
# later
eval "shell-quote some-command $user_switches my args"
OPTIONS
--debug
Turn debugging on.
--help
Show the usage message and die.
--version
Show the version number and exit.
AVAILABILITY
The code is licensed under the GNU GPL. Check http://www.argon.org/~roderick/ or CPAN for updated versions.
AUTHOR
Roderick Schertler <roderick@argon.org>
perl v5.16.3 2010-06-11 SHELL-QUOTE(1)