last will show hostnames in stead of IP addresses if it knows the hostname. In this case the grep command will find nothing, but you can specify the -i option to the last command to force it to print the IP addresses even when it knows the hostnames.
Example:
Code:
last -i | grep 192
Note: The "last" command shows logins, not other types of connection. If you are looking for a log of connections to an SMB (Samba) share I am sure there is a log somewhere - I would need to google it but will rather leave the answer to someone who knows Samba better than me.
hi hartz, sorry for disturbing you again...
it still nothing (weird huh...). i've tried all various ways, like:
last -i | grep 192
last -i | grep 192.168.1
last -i ==> this just local pc
but, the good news my laptop is detect from another windows pc. any idea/ways to knows another IP in my network (LAN)?
Hey,
Just need a little help I'm not sure wat I should do.
We have several little networks setup for testing different things. One of these networks we need to have running at full dulpex.
Right now we run 2 hubs (to go off to 2 differnt parts) and they are half dulpex hubs.
Is is... (1 Reply)
I have setup a AS 2.1 server with no X running or installed. I need to know how to configure the IP and such from command line and change it from DHCP. We used DHCP at first since we didn't know the IP we were going to use and now I need to change it. Any help would be great as Redhat's site just... (2 Replies)
I have a machine that has developed a strange network problem. Anytime it sends an FTP file somewherwe, no problem. When it is the target machine, extremely slow. I checked the /var/adm/messages file and found a few of these:
SUNW,hme0 : No response from Ethernet network : Link down -- cable... (2 Replies)
This is my first attempt in installing a netbsd ever. I'm trying to get myself familiar with some commands and how things work in unix and so far i never knew its this fun. Anyway, unix is our elective here in school and school is gonna start 2 weeks. I'm just trying to get a headstart on this :D... (2 Replies)
1) how do i know my NIC speed if its 10//100???
2)how do i setup by NIC to full duplex
3) any help on setting up etherchannel for NIC failover (1 Reply)
I am new to Solaris and have been searching around for this answer and I think I figured it out but I wanted to run it by you folks. I was trying to figure out if the network on this Solaris 10 machine was set up for 100 Full Duplex. I think from this output that it is 100 full duplex, am I... (2 Replies)
Hi,
I have a linux machine connected to 2 networks, with devices eth0 and eth1.
When I give the command host whatever, how do I now which network is searched for the DNS's ? Is there a default ethernet device for network related commands ? How do I change it ? :confused: (2 Replies)
Hi here is my question;
any help would be appreciated
The Linux system pokey has two Ethernet cards. The first Ethernet card is connected to a companywide
TCP/IP network covering the addresses 87.65.43.xx, where pokey's address is
87.65.43.21. The second Ethernet interface is connected to a... (2 Replies)
Folks;
I have 2 SUSE servers similar in all configuration & both on the same network
(192.168.151.10 & 192.168.151.11) with the same default gateway of 192.168.151.1 and the same netmask of 255.255.255.0 and the same firewall configuration
the first one works fine and i can ssh to it & i can... (3 Replies)
Hi,
I am on Redhat 5. on the /etc/sysconfig/network file
I don't see GATEWAY as one line. I also checked /etc/sysconfig/network-scripts/ifcfg-eth0. I don't see GATEWAY.
But on the server. But when I do netstat -rn. I see many address. Is there some other settings ?
... (2 Replies)
Discussion started by: samnyc
2 Replies
LEARN ABOUT XFREE86
findsmb
FINDSMB(1) User Commands FINDSMB(1)NAME
findsmb - list info about machines that respond to SMB name queries on a subnet
SYNOPSIS
findsmb [subnet broadcast address]
DESCRIPTION
This perl script is part of the samba(7) suite.
findsmb is a perl script that prints out several pieces of information about machines on a subnet that respond to SMB name query requests.
It uses nmblookup(1) and smbclient(1) to obtain this information.
OPTIONS -r
Controls whether findsmb takes bugs in Windows95 into account when trying to find a Netbios name registered of the remote machine. This
option is disabled by default because it is specific to Windows 95 and Windows 95 machines only. If set, nmblookup(1) will be called
with -B option.
subnet broadcast address
Without this option, findsmb will probe the subnet of the machine where findsmb(1) is run. This value is passed to nmblookup(1) as part
of the -B option.
EXAMPLES
The output of findsmb lists the following information for all machines that respond to the initial nmblookup for any name: IP address,
NetBIOS name, Workgroup name, operating system, and SMB server version.
There will be a '+' in front of the workgroup name for machines that are local master browsers for that workgroup. There will be an '*' in
front of the workgroup name for machines that are the domain master browser for that workgroup. Machines that are running Windows for
Workgroups, Windows 95 or Windows 98 will not show any information about the operating system or server version.
The command with -r option must be run on a system without nmbd(8) running. If nmbd is running on the system, you will only get the IP
address and the DNS name of the machine. To get proper responses from Windows 95 and Windows 98 machines, the command must be run as root
and with -r option on a machine without nmbd running.
For example, running findsmb without -r option set would yield output similar to the following
IP ADDR NETBIOS NAME WORKGROUP/OS/VERSION
---------------------------------------------------------------------
192.168.35.10 MINESET-TEST1 [DMVENGR]
192.168.35.55 LINUXBOX *[MYGROUP] [Unix] [Samba 2.0.6]
192.168.35.56 HERBNT2 [HERB-NT]
192.168.35.63 GANDALF [MVENGR] [Unix] [Samba 2.0.5a for IRIX]
192.168.35.65 SAUNA [WORKGROUP] [Unix] [Samba 1.9.18p10]
192.168.35.71 FROGSTAR [ENGR] [Unix] [Samba 2.0.0 for IRIX]
192.168.35.78 HERBDHCP1 +[HERB]
192.168.35.88 SCNT2 +[MVENGR] [Windows NT 4.0] [NT LAN Manager 4.0]
192.168.35.93 FROGSTAR-PC [MVENGR] [Windows 5.0] [Windows 2000 LAN Manager]
192.168.35.97 HERBNT1 *[HERB-NT] [Windows NT 4.0] [NT LAN Manager 4.0]
VERSION
This man page is correct for version 3 of the Samba suite.
SEE ALSO nmbd(8), smbclient(1), and nmblookup(1)AUTHOR
The original Samba software and related utilities were created by Andrew Tridgell. Samba is now developed by the Samba Team as an Open
Source project similar to the way the Linux kernel is developed.
The original Samba man pages were written by Karl Auer. The man page sources were converted to YODL format (another excellent piece of Open
Source software, available at ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 release by Jeremy Allison. The conversion to
DocBook for Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 was done by Alexander Bokovoy.
Samba 3.5 06/18/2010 FINDSMB(1)
10-07-2011
