How can I check how much space is left in the solaris file system? and how can I increase those space in the file system?. I am trying to install Oracle Database on Solaris 8.But, it keep giving me error message says that"There is not enough space on the volume you have specified".
Thanks
... (1 Reply)
This questions only concerns Solaris 10.
Let's say I have swap configured like so in /etc/vfstab:
/dev/dsk/c1t0d0s1 - - swap - no -
/dev/dsk/c1t1d0s1 - - swap - no -
/dev/md/dsk/d1 - - swap - no -
... (1 Reply)
Hi all,
we are usig aix 4.3 and i need to increase the size of "/u01" file sytem which is mounted on logical volume "lv00", but "/u01" file system size is 9 GB and logical volume "lvoo" size 9 GB.how do i increase the size of /u01.do i increase the size of logical volume "lv00" and then... (2 Replies)
Dear All,
How to increase the swap size when physicall memory reaches 60 %. OR it can be only done after the physicall memory is full.
Rgds
Rj (8 Replies)
Hello Admins,
I am running a redhat linux 5 on vmware workstation.
I need to increase or add some more space to my root (/) partition. I don't have any LVM configured..
Please suggest.
# df -kh
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 3.8G 3.1G ... (4 Replies)
Dear Friends,
I would like to increase the size of a file system from 10GB to 15GB.
System is runing on HP-UX 11.31.
Please help in the matter.
Regards,
Bhagawati Pandey (3 Replies)
I have Solaris-10 server running ZFS file-system. ctdp04_vs03-pttmsp01 is one of the non global zone. I wanted to increase a /ttms/prod file-system of zone, which is actually /zone/ctdp04_vs03-pttmsp01/ttms/prod on global server.
I have added a new disk of 9 GB, which is emcpower56a and now I can... (16 Replies)
Hi,
I came across a situation where I had to increase a filesystem that was 100% full and received this error:
/tmp:chfs -a size=+5000M /tmp
0516-634 lquerypv: /tmp directory does not have enough space,
delete some files and try again.
0516-788 extendlv: Unable to extend logical... (2 Replies)
Discussion started by: BG_JrAdmin
2 Replies
LEARN ABOUT FREEBSD
zfsboot
ZFSBOOT(8) BSD System Manager's Manual ZFSBOOT(8)NAME
zfsboot -- bootcode for ZFS on BIOS-based computers
DESCRIPTION
zfsboot is used on BIOS-based computers to boot from a filesystem in a ZFS pool. zfsboot is installed in two parts on a disk or a partition
used by a ZFS pool. The first part, a single-sector starter boot block, is installed at the beginning of the disk or partition. The second
part, a main boot block, is installed at a special offset within the disk or partition. Both areas are reserved by the ZFS on-disk specifi-
cation for boot use. If zfsboot is installed in a partition, then that partition should be made bootable using appropriate configuration and
boot blocks described in boot(8).
BOOTING
The zfsboot boot process is very similar to that of gptzfsboot(8). One significant difference is that zfsboot does not currently support the
GPT partitioning scheme. Thus only whole disks and MBR partitions, traditionally referred to as slices, are probed for ZFS disk labels. See
the BUGS section in gptzfsboot(8) for some limitations of the MBR scheme support.
USAGE
zfsboot supports all the same prompt and configuration file arguments as gptzfsboot(8).
FILES
/boot/zfsboot boot code binary
/boot.config parameters for the boot block (optional)
/boot/config alternative parameters for the boot block (optional)
EXAMPLES
zfsboot is typically installed using dd(1). To install zfsboot on the ada0 drive:
dd if=/boot/zfsboot of=/dev/ada0 count=1
dd if=/boot/zfsboot of=/dev/ada0 iseek=1 oseek=1024
If the drive is currently in use, the GEOM safety will prevent writes and must be disabled before running the above commands:
sysctl kern.geom.debugflags=0x10
zfsboot can also be installed in an MBR slice:
gpart create -s mbr ada0
gpart add -t freebsd ada0
gpart create -s BSD ada0s1
gpart bootcode -b /boot/boot0 ada0
gpart set -a active -i 1 ada0
dd if=/boot/zfsboot of=/dev/ada0s1 count=1
dd if=/boot/zfsboot of=/dev/ada0s1 iseek=1 oseek=1024
Note that commands to create and populate a pool are not shown in the example above.
SEE ALSO dd(1), boot.config(5), boot(8), gptzfsboot(8), loader(8), zfsloader(8), zpool(8)HISTORY
zfsboot appeared in FreeBSD 7.3.
AUTHORS
This manual page was written by Andriy Gapon <avg@FreeBSD.org>.
BUGS
Installing zfsboot with dd(1) is a hack. ZFS needs a command to properly install zfsboot onto a ZFS-controlled disk or partition.
BSD September 15, 2014 BSD