Vscsi and npiv on same adapter Post: 302553934

10 More Discussions You Might Find Interesting

1. AIX

Anyone using NPIV?

Is anyone here using NPIV with AIX? If you are, what type of switch are you connected to? Also, please share some impressions of NPIV over traditional port-to-port LUN assignments. We are looking to move to NPIV and need some convincing argume... I mean information.

2. AIX

Migrating hdisks from vscsi to NPIV with powerpath

Hi All, I'm preparing to migrate some servers from vscsi to pass-thru NPIV. I am planning to have the SAN team move the exact LUNs from vio1/vio2 to those two VWWN through NPIV. My question is on the partition itself.. right now, let's say I have hdisk0/1/2/3/4 that are part of datavg. They...

3. AIX

NPIV with 8Gb PCI Express Dual Port FC Adapter

All I am at a loss with a VIO server running ios 2.2.0.10-FP-24 SP-01. The VIO server is fitted with two 8Gb PCI Express Dual Port FC Adapters. However when I run the lsnports command only two of the adapter ports show as capable: $ lsnports name physloc ...

4. AIX

hdisk mapping to a vSCSi Adapter

Hello, I have a VIOS System and would like to do mapping some hdisks, hdisk160 until hdisk165 to a vSCSi Adapter. I try to do this in the oem_setup_env like the following: for i in $(lspv | grep hdisk* | awk {'print $1'}; do mkdev -V $i -p vhost20 done There where a mapping with...

5. AIX

NPIV mapping problem

Hello all I hope someone can help me with this. I have a single LPAR which is supplied a rootvg and datavg disk set from a dual VIO server configuration. I see dual path disks for all the datavg disks but only see one path for the rootvg disks. The client LPAR has the following: fcs0 ...

6. AIX

NPIV custom WWN

Hi All :) i would like to know if i can customize the WWN of the new VFC (NPIV). Or, if i must move the LPAR on another server with another FCS, i have to change the zoning?? Thanks in advance. Mario ---------- Post updated 09-21-12 at 02:51 AM ---------- Previous update was 09-20-12 at...

7. AIX

VIOS FC Mapping/NPIV questions

Please forgive me here as I don't fully understand what I am talking about here so if I use the wrong terminology please overlook me. We have multiple AIX LPARs on the managed system with two VIO Servers. A Co-Worker and I are trying to set up a new LPAR client (The guy that knows this is out)...

8. AIX

How to put vscsi in available state?

Hello Friends, My question/problem is that I noticed 2 servers in my environment vscsi is showing up as defined (not available) or is defined and not showing the path to both vscsi's when ruining lspath command. I am new to AIX admin, work alone, and work in an small environment. My question is,...

9. AIX

Devices.vscsi.disk ?

Hello, When I assigned CDROM from IVM (VIOS) to LPAR and then running cfgmgr i get the following message on the client lpar #cfgmgr cfgmgr: 0514-621 WARNING: The following device packages are required for device support but are not currently installed. devices.vscsi.disk searching...

10. AIX

Misconfiguration detected Adapter interface name en 3 Adapter offset 0

Hi, We had a hardware problem with an IBM System p5 server, with AIX 5.2 We restore from a tape the last backup we had, but the server does not boot up as expected. The server try to mount some directories from a storage, but could not comunicate with them, we check the FC and everything is...

LEARN ABOUT SUNOS

asadmin-delete-resource-adapter-config

asadmin-delete-resource-adapter-config(1AS)			   User Commands		       asadmin-delete-resource-adapter-config(1AS)

NAME

       asadmin-delete-resource-adapter-config,	delete-resource-adapter-config	-  deletes the configuration information created in domain.xml for
       the connector module

SYNOPSIS

       delete-resource-adapter-config --user admin_user [--password admin_password][--host localhost] [--port  4848][--secure|-s]  [--passwordfile
       filename] [--terse=false] [--echo=false] [--interactive=true] raname

       Deletes the entry in the resource-adapter-config element of the domain.xml file with the provided --raname.

       This command is supported in remote mode only.

OPTIONS

       --user		       authorized domain application server administrative username.

       --password	       password to administer the domain application server.

       --host		       machine name where the domain application server is running.

       --port		       port number of the domain application server listening for administration requests.

       --secure 	       if true, uses SSL/TLS to communicate with the domain application server.

       --passwordfile	       file containing the domain application server password.

       --terse		       indicates that any output data must be very concise, typically avoiding human-friendly sentences and favoring well-
			       formatted data for consumption by a script. Default is false.

       --echo		       setting to true will echo the command line statement on the standard output. Default is false.

       --interactive	       if set to true (default), only the required password options are prompted.

OPERANDS

       raname		       the value kept in the resource-adapter-name in the domain.xml file.

       Example 1: Using delete-resource-adapter-config

       asadmin> delete-resource-adapter-config --username admin1 --password adminadmin
       myresourceadapter
       Command delete-resource-adapter-config executed successfully

EXIT STATUS

       0		       command executed successfully

       1		       error in executing the command

       asadmin-create-resource-adapter-config(1AS), asadmin-list-resource-adapter-configs(1)

J2EE 1.4 SDK							    March 2004			       asadmin-delete-resource-adapter-config(1AS)