Shelling Out to Give a System Command Drains Free Memory
I am working on a large program which is always up and must run in as many Linux flavors as possible, i.e. be portable. I have created a number of general utility functions for common tasks it needs to do, and one of these utility functions goes out to the shell to give a Linux command and return the output from the command. Depending on the exact Linux command being performed, occasionally it can drain free memory and not free it immediately.
In one case, I need to call this function to give a shell command and get data back a hundred or so times in a loop, which executes in just a moment. I find that during that loop my free memory decreases dramatically. I presume that it's freed at some point, but during execution of the loop, it can get quite low, and I think it may have caused a program abend in one environment. If you have read this far and are wondering, the command being given is to determine if a service is up, and it does this for every service which has script in /etc/init.d. The command, for bluetooth, for example, is:
service bluetooth status
My question is specifically this, is there anything I can do to my code in this function so that it either uses less memory of frees it better. Here is the code:
I have checked and the character array commandOutputLine[] has no bearing on this problem. How might I re-write this function to make it less of a memory hog or to make it free its memory at once? Thanks in advance.
Reference:
http://story.news.yahoo.com/news?tmpl=story&ncid=738&e=1&u=/ap/20041115/ap_on_hi_te/sun_solaris10
Sun to Give Out Operating System for Free
Mon Nov 15, 7:31 AM ET
By MATTHEW FORDAHL, AP Technology Writer
SAN JOSE, Calif. - After investing roughly $500 million and... (1 Reply)
For example if i have the piece of code as follows:
CountryName = (char *)malloc((strlen(CountryName)+1)*sizeof(char));
memset(CountryName, 0, strlen(CountryName)+1);
CountryName = SOME VALUE
Now how do i free the memory after use of this code???? :confused: (3 Replies)
Hello,
Please can any one explain about the parameters to the write systemcalls??
How are they passed?? and how is the address of the user buffer is handled by the kenel??
for ex: write(fd,buf,count);
How does the kernel handles this user buffer address??
After write does the kernel write... (1 Reply)
Hi,
Im working on Solaris 9 on SPARC-32 bit running on an Ultra-80, and I have to find out the following:-
1. Total Physical Memory in the system(total RAM).
2. Available Physical Memory(i.e. RAM Usage)
3. Total (Logical) Memory in the system
4. Available (Logical) Memory.
I know... (4 Replies)
Hi all,
Could please let me know how to get the more memory free space (not added the RAM) in local zone.
-bash-3.00# vmstat 2 5
kthr memory page disk faults cpu
r b w swap free re mf pi po fr de sr s0 s1 s1 s1 in sy cs us sy... (3 Replies)
Hi Export,
i execute 'top' command to show the free memory in Solaris host, but the read is much lower than the RSS value shown in prstat command. Which one can reflect the real status and it is possible the difference caused by any patch of OS?
Top command (only 883 memory is free)... (3 Replies)
I was running a program and it stopped and showed "Out of Memory!". at that time, the RAM used by this process is around 4G and the free memory size of the machine is around 30G. Does anybody know what maybe the reason? this program is written with Perl. the OS of the machine is Solaris U8. And I... (1 Reply)
Hi guys.
I've a question, if we are using a syscall that receives a string allocated dynamicaly to a determined size, or NUL and it will allocate the apropriate size. We should free the memory or the OS will do it for us?
If a function returns a pointer we should free that poiter when we are done... (7 Replies)
Hi,
I am wondering if there is a way to free up memory in Solaris manually ? the way we can do it in Linux for example :
echo `/bin/date` "************* Memory Info Before *************"
free -m
sync
echo 1 > /proc/sys/vm/drop_caches
echo 2 > /proc/sys/vm/drop_caches
echo 3 >... (13 Replies)
Discussion started by: terrykhatri531
13 Replies
LEARN ABOUT SUNOS
pclose
popen(3C) Standard C Library Functions popen(3C)NAME
popen, pclose - initiate a pipe to or from a process
SYNOPSIS
#include <stdio.h>
FILE *popen(const char *command, const char *mode);
int pclose(FILE *stream);
DESCRIPTION
The popen() function creates a pipe between the calling program and the command to be executed. The arguments to popen() are pointers to
null-terminated strings. The command argument consists of a shell command line. The mode argument is an I/O mode, either r for reading or
w for writing. The value returned is a stream pointer such that one can write to the standard input of the command, if the I/O mode is w,
by writing to the file stream (see intro(3)); and one can read from the standard output of the command, if the I/O mode is r, by reading
from the file stream. Because open files are shared, a type r command may be used as an input filter and a type w as an output filter.
The environment of the executed command will be as if a child process were created within the popen() call using fork(2). If the applica-
tion is standard-conforming (see standards(5)), the child is invoked with the call:
execl("/usr/xpg4/bin/sh", "sh", "-c", command, (char *)0);
otherwise, the child is invoked with the call:
execl("/usr/bin/sh", "sh", "-c", command, (char *)0);
The pclose() function closes a stream opened by popen() by closing the pipe. It waits for the associated process to terminate and returns
the termination status of the process running the command language interpreter. This is the value returned by waitpid(3C). See
wait.h(3HEAD) for more information on termination status.
RETURN VALUES
Upon successful completion, popen() returns a pointer to an open stream that can be used to read or write to the pipe. Otherwise, it
returns a null pointer and may set errno to indicate the error.
Upon successful completion, pclose() returns the termination status of the command language interpreter as returned by waitpid(). Other-
wise, it returns -1 and sets errno to indicate the error.
ERRORS
The pclose() function will fail if:
ECHILD The status of the child process could not be obtained, as described in the DESCRIPTION.
The popen() function may fail if:
EMFILE There are currently FOPEN_MAX or STREAM_MAX streams open in the calling process.
EINVAL The mode argument is invalid.
The popen() function may also set errno values as described by fork(2) or pipe(2).
USAGE
If the original and popen() processes concurrently read or write a common file, neither should use buffered I/O. Problems with an output
filter may be forestalled by careful buffer flushing, for example, with fflush() (see fclose(3C)). A security hole exists through the IFS
and PATH environment variables. Full pathnames should be used (or PATH reset) and IFS should be set to space and tab (" ").
The signal handler for SIGCHLD should be set to default when using popen(). If the process has established a signal handler for SIGCHLD, it
will be called when the command terminates. If the signal handler or another thread in the same process issues a wait(3C) call, it will
interfere with the return value of pclose(). If the process's signal handler for SIGCHLD has been set to ignore the signal, pclose() will
fail and errno will be set to ECHILD.
EXAMPLES
Example 1: popen() example
The following program will print on the standard output (see stdio(3C)) the names of files in the current directory with a .c suffix.
#include <stdio.h>
#include <stdlib.h>
main()
{
char *cmd = "/usr/bin/ls *.c";
char buf[BUFSIZ];
FILE *ptr;
if ((ptr = popen(cmd, "r")) != NULL)
while (fgets(buf, BUFSIZ, ptr) != NULL)
(void) printf("%s", buf);
(void) pclose(ptr);
return 0;
}
Example 2: system() replacement
The following function can be used in a multithreaded process in place of the most common usage of the Unsafe system(3C) function:
int my_system(const char *cmd)
{
FILE *p;
if ((p = popen(cmd, "w")) == NULL)
return (-1);
return (pclose(p));
}
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Interface Stability |Standard |
+-----------------------------+-----------------------------+
|MT-Level |Safe |
+-----------------------------+-----------------------------+
SEE ALSO ksh(1), pipe(2), fclose(3C), fopen(3C), stdio(3C), system(3C), wait(3C), waitpid(3C), wait.h(3HEAD), attributes(5), standards(5)SunOS 5.10 17 Mar 2004 popen(3C)