@DukeNuke2
It seems he is using ALOM shell not an rsc card.
@LittleLebowski
Try to switch between the ALOM Command Shell ( sc prompt ) and the OpenBoot PROM Prompt (Ok prompt).
By issuing the following command
Other wise
You can try serial console connection to server directly ttya using null modem to some terminal emulator , You can refer to the owner's guide which it has some instruction on setting up a console
or
If nothing else works try to sit in front of server's console and make sure that you have keyboard and monitor attached to the sever.
hi expert,
sorry i'm new in solaris system, need more advice and help :)
i'm confusing with mirroring disk at my sparc v890 solaris 8, i have 6 harddisk which the structure shown below :
format :
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
... (4 Replies)
Hello,
Need to know all benefits\differences for V890 over V880.
We are really keen to know about this.
Can anybody please take out some time and get us the information.
Regards,
Narinder (4 Replies)
Question, I have a new V890 preloaded witrh Solaris 10. Due to SW compatibility I need to run Sol 8 on the server. When running boot cdrom from the ok prompt, I get amessages looking for a location on the CDROM to find the startup install SW. The path must be different from what's on Sol 10 install... (4 Replies)
Hi all,
After the V890 server shutdown unexpectedly, it became unaccessible from RSC. There is one error message about it: rscadm: RSC firmware not responding
Do you have experienced this? Please help! (1 Reply)
Hello Experts,
I have a StorEdge 3320 attached to V890, the problem is that I am copying data from v890's internal hdds to 3320's hdds, it is taking a-lot of time, the transfer is very slow.
while I have checked the transfer from V890's internal hdd to another machines it is good. So, its mean... (15 Replies)
Hi all!
I've a machine - SunFire V890, it've been failed by OS error for 2 weeks ago, and now, I must reinstall OS (Solaris 10 2009), the progress was successful, but when I reboot, it displayed the error like :
Error -256: Last trap memory ... access aligned
Error -256: Last trap memory... (1 Reply)
Dear All,
I need your help. I have server like this
SunOS 5.10 Generic_141444-09 sun4u sparc SUNW,Sun-Fire-V890
with messages like this...
Oct 10 17:07:52 iscsi: NOTICE: unrecognized ioctl 0x403
Oct 10 17:07:52 scsi: WARNING: /pseudo/fcp@0 (fcp0):
Oct 10 17:07:52 Invalid... (4 Replies)
hello
i have a sun server V890 and it stops booting after adding 2 CPUs modules and gives me the following error message:
Enabling system bus....... Done
Initializing CPUs......... Done
Initializing boot memory..
RAM-Copy CRC failure!Can't start: No image found
FATAL: Can't find/decompress... (0 Replies)
I am battling to get a V890 up and running. The system appears to have AUTOBOOT=false, so no OS comes up when it's powered on, and I do not have the credentials to get to the RSC management console. Output to ttya serial console ends at "Probing I/O buses", I assume because output is then being... (4 Replies)
Hi all
I am currently using a T5120 to write and run some simulation code I've been working on which heavily relies on large matrix multiplication procedures. I am posting this to call out for some of you run and share the results of a simple benchmark I've written to compare the matrix... (1 Reply)
Discussion started by: toguro123
1 Replies
LEARN ABOUT ULTRIX
systemd-getty-generator
SYSTEMD-GETTY-GENERATOR(8) systemd-getty-generator SYSTEMD-GETTY-GENERATOR(8)NAME
systemd-getty-generator - Generator for enabling getty instances on the console
SYNOPSIS
/lib/systemd/system-generators/systemd-getty-generator
DESCRIPTION
systemd-getty-generator is a generator that automatically instantiates serial-getty@.service on the kernel console(s), if they can function
as ttys and are not provided by the virtual console subsystem. It will also instantiate serial-getty@.service instances for virtualizer
consoles, if execution in a virtualized environment is detected. If execution in a container environment is detected, it will instead
enable console-getty.service for /dev/console, and container-getty@.service instances for additional container pseudo TTYs as requested by
the container manager (see Container Interface[1]). This should ensure that the user is shown a login prompt at the right place, regardless
of which environment the system is started in. For example, it is sufficient to redirect the kernel console with a kernel command line
argument such as console= to get both kernel messages and a getty prompt on a serial TTY. See kernel-parameters.txt[2] for more information
on the console= kernel parameter.
systemd-getty-generator implements systemd.generator(7).
Further information about configuration of gettys can be found in systemd for Administrators, Part XVI: Gettys on Serial Consoles (and
Elsewhere)[3].
SEE ALSO systemd(1), agetty(8)NOTES
1. Container
Interface
https://www.freedesktop.org/wiki/Software/systemd/ContainerInterface/
2. kernel-parameters.txt
https://www.kernel.org/doc/Documentation/admin-guide/kernel-parameters.txt
3. systemd for Administrators, Part XVI: Gettys on Serial Consoles (and Elsewhere)
http://0pointer.de/blog/projects/serial-console.html
systemd 237SYSTEMD-GETTY-GENERATOR(8)