Sponsored Content
Operating Systems Linux Slackware How configure micromax bsnl 3G modem in KPPP on slackware 13.1 Post 302549846 by hitlar on Wednesday 24th of August 2011 05:34:46 AM
Old 08-24-2011
How configure micromax bsnl 3G modem in KPPP on slackware 13.1

How configure micromax bsnl 3G modem in KPPP on slackware 13.1 while it automatically mounted under

/dev/sr1 iso9660 /media/modem


and in lsusb command add following information:


Bus 001 Device 020: ID 1c9e:f000


now i follow these steps for usb switch t
o modem
usb_modeswitch.conf File

DefaultVendor= 0x1c9e
DefaultProduct= 0xf000
TargetVendor= 0x1c9e
TargetProduct= 0x9605
# only for reference
MessageEndpoint=0x01
MessageContent="55534243123456788000000080000606f50402527000000000000000000000"

run the program:

usb_modeswitch -C usb_modeswitch.conf
modprobe cdc_acm
modprobe usbserial vendor=0x1c9e product=0x9605
now connect with KPP
in Device->modem device->
dev/ttyUSB2, it detect modem and when query
modem by :
modem->Query Modem->Modem Query Result Window show following same string in
each AT1-AT7 field
AT1 :- Manufacturer: "Micromax" Model: Micromax MMX310G 3G USB Modem Revision: LQA0094.1.1_MG32 IMEI: 910532501142484 +GCAP: +CGSM,+FCLASS,+DS
AT2 :- Manufacturer: "Micromax" Model: Micromax MMX310G 3G USB Modem Revision: LQA0094.1.1_MG32 IMEI: 910532501142484 +GCAP: +CGSM,+FCLASS,+DS
so on...
Now Connect
Looking Modem pass
Modem Ready Pass
Initializing Modem hang the overall process & login script display window
show expecting Ok and hang
 

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

how to configure modem in Linux

I have Linux RedHat7.1 and I have this modem RockWell HCF 56KDATA Fax PCI Modem. I don't know how to configure this modem. Can anybody please help me out. I tried "linuxconf" it does not recognize this command. Pleas help me out. Regards -Iftikhar (1 Reply)
Discussion started by: syedifti
1 Replies

2. UNIX Desktop Questions & Answers

Help needed to configure GUI with Slackware 7 on an IBM Thinkpad Laptop

I am using Slackware 7 on my IBM Thinkpad. I am unable to configure it to display a graphical environment. Typing startx usually generates a few errors. The system, however, does boot into the shell environment without any issues or problems. I have been able to setup Slackware 7 successfully... (2 Replies)
Discussion started by: adrienb
2 Replies

3. UNIX for Dummies Questions & Answers

Modem - Test /dev/modem

Ok. I tried following the directions from some of the other threads, but I've hit a road block. I have red hat 7.3 and I installed the hcf package: hcfpcimodem-0.99lnxtbeta03042700k2.4.18_3-1rh.i386.rpm It installed ok, no errors, but I still can't get linux to find my modem. I've tried... (2 Replies)
Discussion started by: lawadm1
2 Replies

4. Solaris

how to configure modem

hi, can u pls help to configure modem on SUN system for the inbound dialing.....so that i can connect to the system remotely through modem..........thx girish (2 Replies)
Discussion started by: girish_shukla
2 Replies

5. Solaris

help me!!!! how configure modem dial up with smc in solaris 10

Dear All, i have problem during install modem dial up with smc in solaris 10. i can't find "login" because it's stop in _receive started transmit started. thanks for your attention. this is the list during i dial to this number : altconn called Device Type ACU wanted... (0 Replies)
Discussion started by: mr.ridho
0 Replies

6. SuSE

How to configure a wireless modem

I bought a wireless modem from '' 3 ''. It has software for Windows users. I talked to their support center. They know nothing about Linux. In Ubuntu, I looked at System --> Administration --> Network I have to click the unlock in the dialog. It recognized wired connections; there... (0 Replies)
Discussion started by: Angelo
0 Replies

7. Solaris

Broadband connection (BSNL& AIRTEL)

Dear Friends, Kindly help me to connect Broadband connection in my Solaris 10 OS. I have heard that i have to write a script. Waiting for solution......... Thanks (0 Replies)
Discussion started by: anuragpauldani
0 Replies

8. Hardware

Slackware 13.1 can't configure two network cards

Hello everybody, I'm having troubles with Slackware 13.1 and network cards. I have one on-board Ethernet card (which is recognized and works okay) and a PCI Ethernet card (which is also recognized, but doesn't appear in 'ifconfig -a'). If i run a 'lspci', i can see the kernel recognized the... (5 Replies)
Discussion started by: semash!
5 Replies

9. Solaris

bsnl broadband and playing media in solaris 10

Hi all, I am a newbie in UNIX . Earlier I used opensuse 11.3 just because it was secure for connecting to the INTERNET than Windows. Now I have to use Solaris for my work, so I was thinking of having windows XP2,opensuse 11.3 and solaris on the same pc. In spite of some good suggestion from... (5 Replies)
Discussion started by: M.Choudhury
5 Replies
load_dat_font(3alleg4)						  Allegro manual					    load_dat_font(3alleg4)

NAME
load_dat_font - Loads a FONT from an Allegro datafile. SYNOPSIS
#include <allegro.h> FONT *load_dat_font(const char *filename, RGB *pal, void *param) DESCRIPTION
Loads a FONT from an Allegro datafile. You can set param parameter to point to an array that holds two strings that identify the font and the palette in the datafile by name. The first string in this list is the name of the font. You can pass NULL here to just load the first font found in the datafile. The second string can be used to specify the name of the palette associated with the font. This is only returned if the pal parameter is not NULL. If you pass NULL for the name of the palette, the last palette found before the font was found is returned. You can also pass NULL for param, which is treated as if you had passed NULL for both strings separately. In this case, the function will simply load the first font it finds from the datafile and the palette that precedes it. For example, suppose you have a datafile named `fonts.dat' with the following contents: FONT FONT_1_DATA FONT FONT_2_DATA FONT FONT_3_DATA PAL FONT_1_PALETTE PAL FONT_2_PALETTE Then the following code will load FONT_1_DATA as a FONT and return FONT_1_PALETTE as the palette: FONT *f; PALETTE pal; char *names[] = { "FONT_1_DATA", "FONT_1_PALETTE" } f = load_dat_font("fonts.dat", pal, names); If instead you want to load the second font, FONT_2, from the datafile, you would use: FONT *f; PALETTE pal; char *names[] = { "FONT_2_DATA", "FONT_2_PALETTE" } f = load_dat_font("fonts.dat", pal, names); If you want to load the third font, but not bother with a palette, use: FONT *f; char *names[] = { "FONT_3_DATA", NULL } f = load_dat_font("fonts.dat", NULL, names); RETURN VALUE
Returns a pointer to the font or NULL on error. Remember that you are responsible for destroying the font when you are finished with it to avoid memory leaks. SEE ALSO
register_font_file_type(3alleg4), load_font(3alleg4) Allegro version 4.4.2 load_dat_font(3alleg4)
All times are GMT -4. The time now is 01:32 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy