07-25-2011
So, I've got a development board Digi ConnectCore Wi-9C (digi.com/products/model.jsp?mid=576). There is need to establish connection between Digi and another board by UART.
At the beginning I wrote a code for serial communication between PC (running Kubuntu, there was program) and laptop. It was Ok, all worked.
Next step was to establish connection between Digi and my laptop. I compiled the same code for Digi board (dev/ttyS0) and experienced a problem: I can send data, but can't receive any byte!
I've tried blocking and non-blocking regimes, but nothing helped. No data was received.
By the way, Linux console (on Digi) is working properly (dev/ttyS1).
10 More Discussions You Might Find Interesting
1. Programming
How can 'popen()' be used for reading and writing to opening pipe?
If i try 'popen("prog", "rw")'
and then put and get chars - it does
not work.
What is wrong? (1 Reply)
Discussion started by: szzz
1 Replies
2. Shell Programming and Scripting
I have tried to show the file name whose size is greater than 200 byte in current directory.
Please help me.
ls -l | tr -s " " " " | cut -f 5,9 -d " " >out.txt
#set -a x `cat out.txt`
i=0
`cat out.txt` | while
do
read x
echo $x
#re=200
j=0
if }" < "200" ]
then
echo $j
j=`expr $j... (2 Replies)
Discussion started by: rinku
2 Replies
3. Shell Programming and Scripting
I need to find all the files that have group Read or Write permission or files that have user write permission.
This is what I have so far:
find . -exec ls -l {} \; | awk '/-...rw..w./ {print $1 " " $3 " " $4 " " $9}'
It shows me all files where group read = true, group write = true... (5 Replies)
Discussion started by: shunter63
5 Replies
4. Programming
Hi all,
I have a problem with some read/write functions.
I have a .bin file which contains a lot of structures as follows:
struct alumno
{
char id;
char apellido1;
char apellido2;
char nombre;
float nota1p;
float nota2p;
float notamedia;
char photofilename;
};
What I have... (3 Replies)
Discussion started by: Attenea
3 Replies
5. IP Networking
Hi,
We have smb client running on two of the linux boxes and smb server on another linux system. During a backup operation which uses smb, read of a file was allowed while write to the same file was going on.Also simultaneous writes to the same file were allowed.Following are the settings in the... (1 Reply)
Discussion started by: swatidas11
1 Replies
6. IP Networking
hi
am newbie to unix and socket programing
I am trying to figuring out syntax for read and write
to send data from server to client and client can read it
I have to send two integers
write(newsockfd,buffer,"%d %d",x,y,0) writing from client where x and y are two integers..
... (7 Replies)
Discussion started by: karthik1238
7 Replies
7. Programming
HI
I need to implement a client/server TCP application. the customer is the client and the bartender is the server.
When the customer enter the Bar, client connects to the server
Server should reply the client immediately. Other wise if the server is busy, it should send an update message... (10 Replies)
Discussion started by: lixiao1212
10 Replies
8. Emergency UNIX and Linux Support
Hi,
I have been trying to capture console logs from the init script.
When the ramfs is mounted, i check if usb is connected , if conncted, i mount it and redirected the console logs like so:
cat & /dev/ttyS1 >> /mnt/logs.txt
I'm getting
/bin/sh : /dev/ttyS1 :permission denied
... (8 Replies)
Discussion started by: xerox
8 Replies
9. Shell Programming and Scripting
I have got a file in following format:
AAAAAAA
BBBBBBBB
CCCCCCC
DDDDDDD
I am trying to read this file and out put it in following format:
AAAAAAA,BBBBBBB,CCCCCCC,DDDDDD
Preferred method is shell or Perl.
Any help appreciated. (11 Replies)
Discussion started by: Araoki
11 Replies
10. Programming
Can someone help me to write this program in C in QNX?
Using the FIFO queues write a simple communication system consisting of programs write and read. The program write the parameters given strings enclosed in single quotes. These strings are written to the FIFO file. Reads the program read... (1 Reply)
Discussion started by: ebasse2
1 Replies
LEARN ABOUT FREEBSD
nsd-xfer
nsd-xfer(8) nsd 3.2.12 nsd-xfer(8)
NAME
nsd-xfer - AXFR client to transfer zones from a name server
SYNOPSIS
nsd-xfer [-4] [-6] [-a address[@port]] [-p port] [-s serial] [-T tsiginfo] [-v] -z zone -f file servers
DESCRIPTION
Nsd-xfer is program to transfer zones from a name server using AXFR. NSD is a complete implementation of an authoritative DNS nameserver.
OPTIONS
-4 Only send to IPv4 addresses.
-6 Only send to IPv6 addresses.
-a address[@port]
Specify the source address (and port) to send from.
-f file
The file to store the zone in.
-p port
Specify the port to send to.
-s serial
Specify the serial of the current zone. The zone is only transferred if the master server has a zone with a greater serial number.
-T tsiginfo
Use TSIG to verify the zone transfer. The tsiginfo file must contain the TSIG key information. The file is removed upon successful
reading of the key. The format of the tsiginfo file is described in the doc/README file (section 3.3).
-v Be more verbose.
-z zone
Specify the zone to receive.
servers
List of nameservers to try.
EXAMPLES
To run this program the standard way type:
# nsd-xfer -z foobar.cz -f foobar.cz.zone 1.2.3.4
SEE ALSO
nsd(8), nsdc(8), nsd.conf(5), nsd-checkconf(8), nsd-notify(8), nsd-patch(8), zonec(8)
AUTHORS
NSD was written by NLnet Labs and RIPE NCC joint team. Please see CREDITS file in the distribution for further details.
NLnet Labs jul 19, 2012 nsd-xfer(8)